Availability
Showing In Stock Items. Show All 125 Items.
Give your ride an attitude adjustment with ACDelco crankshaft position sensors. Your original sensor can become worn or burnt and sensitive to hot engine temperatures, leaving you sitting on the side of the road. ACDelco offers high-quality, direct-fit replacement crankshaft position sensors to respond to your car's needs. Dozens of models are available for fitment on thousands of vehicles from the 1980s and up. Enhance the efficiency and performance of your ride; order the crankshaft position sensor recommended for your application.
( 7 )
$59.99
Is your check engine light on and vehicle running rough? Could be a failed knock sensor. Dorman knock sensor kits combine the necessary sensor and wiring harness that joins them for a complete repair in one package. Features include: * Plug-and-play installation--matches original wiring harness, requiring no cutting or splicing * Quality assured--benchmarked against original components for performance and quality * Excellent value--original equipment quality at significant cost savings
( 20 )
$77.95
Failure or poor performance from a coil can result in a misfire, a rough-running, hard-starting engine, and excessive emissions. ACDelco ignition coils provide the performance needed to help keep vehicles running the way that they were designed. These coils have corrosion-protected laminations to guard them from the harsh operating environment. Primary and secondary coil windings often feature molded plastic protection. Order the replacement model designed for your vehicle and engine application.
( 25 )
$68.99
With Summit Racing™ branded, all-100 percent silicone 8mm constructed wire, a 300 ohm per foot wire-wound EMI suppression core, high-heat silicone boots, and stainless steel and brass terminals, you get all the high-end features a wire set can offer, without breaking the bank! * Dual silicone high tear-resistant jacketing with fiberglass matting gives you the highest heat protection and superior terminal pull-off values in the business * Our 300 ohm per foot wire-wound magnetic suppression core maximizes the voltage output of your ignition system, while maintaining high EMI resistance values * Stainless steel terminals with posi-lock hardened clips and brass terminals are used for superior connection and consistent voltage delivery * Ultra-high heat silicone spark plug boots provide superior radiant heat protection -- High dielectric strength properties virtually eliminate voltage leakage and blow through Installing our Summit Racing™ high-end 8mm sets will give you the confidence, reliability, and performance you expect from Summit Racing™ products.
( 1012 )
$55.99
—
$57.99
ACDelco coil and ignition wiring harnesses will spark renewed energy for your engine. Wiring harnesses can deteriorate over time, leaving them unable to deliver the necessary voltage for power. Replace worn wiring with ACDelco coil and ignition wiring harnesses and keep the spark alive!
( 20 )
$106.99
Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets deliver maximum power output. Engineered for high performance engines that need all the voltage they can get, Max-Fire wires are constructed of leads that transport a low 50 ohms of resistance per ft. for maximum EMI/RFI noise suppression. Each Ultra-Spark starts with a spiral wound Ferro-magnetic KEVLAR® core wrapped with a suppression layer, stainless steel conductive winding, and a latex silicone layer. This is followed by an EPDM inner insulation topped with braid tape and a tempered 8.5mm silicone outer jacket that won't crack or shrink, and is resistant to chemicals. The wires are finished with silicone plug boots featuring high-quality snap and lock-style terminals for easy installation. Give your engine the most power possible with Edelbrock Max-Fire Ultra-Spark 50 spark plug wire sets.
( 51 )
$85.95
—
$106.95
Engine knock is one of the most unwelcome problems to plague a vehicle. When your ignition timing becomes faulty, the results are felt unless corrected through a sensor. Chevrolet Performance knock sensor wiring harnesses should be used when replacing those key sensors, providing fresh OEM wiring and grommets. The harness units are available for over a hundred submodels from makers such as Chevrolet, GMC, Cadillac, Pontiac, Buick, and Hummer.
( 33 )
$74.99
Oxygen sensors, also known as Lambda sensors or O2 sensors, are among the most sensitive and critical components on your car's engine. They monitor the air/fuel mixture under idle, moderate acceleration, and cruise conditions. Oxygen sensors have a smaller range of limits in detecting and adjusting the difference from an optimum air/fuel ratio than the newer wide range air/fuel sensors (A/F sensors). Today's engines may use as many as four oxygen sensors to monitor exhaust gas oxygen content and catalytic converter efficiency. In order to perform these functions properly, Denso oxygen sensors adhere to strict OE standards within incredibly close tolerances. A malfunctioning or incorrectly calibrated oxygen sensor can hurt drivability and illuminate the check engine light, resulting in costly and time-consuming repairs. Denso First Time Fit oxygen sensors are designed to meet those tolerances and more. Key features and benefits of Denso Oxygen Sensors include: * Robotic laser welds * Porous PTFE filters block efficiency-robbing contaminants * Double-protection covers maintain proper temperature for quicker response times and protect ceramic elements from silicone and lead fouling * Rugged, watertight stainless steel housings resist corrosion and contamination * Aluminum oxide trap layers keep silicone and lead out, preventing damage to the platinum electrode * Refined zirconia elements improves sensor response * Superior design maximizes engine performance while reducing fuel consumption and harmful emissions * First Time Fit design delivers the right part the first time
( 92 )
$50.99
—
$55.99
Summit Racing brings you our ultimate ignition wire with our 8.5mm 50ohm wire sets. They are made with 100% high tear resistant silicone construction, a 50ohm per foot Wire-Wound FERRITE magnetic suppression core, stainless steel and brass terminals and extreme heat-resistant boots. Only the highest quality raw materials and Made in the USA workmanship, go into every set. The 100% High-Tear resistant silicone jacket protects the inner ferrite core from heat breakdown. The dual silicone layers are bonded together using a tightly woven fiberglass matting that virtually eliminates terminal pull off. Our 50-ohm ferrite core has over 3 FEET of nickel/copper mag winding per INCH! With this tightly wound core, you can be assured that your spark plugs are getting all the power your ignition system can provide. Stainless steel terminals with Posi-lock hardened clips and brass terminals are used on all applications; for superior connection and consistent voltage delivery. High heat silicone and high dielectric strength polymers make up the extreme composition of the spark plug boots. Our boots provide superior radiant heat resistance for longevity and high dielectric strength properties to prevent voltage leakage. With all of these features built into our Race-proven 8.5mm 50-ohm sets, you can be assured that installing one of these sets on your engine will give you all the performance and durability you have come to expect from Summit Racing products.
( 196 )
$68.99
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 157 )
$87.90
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 300 )
$83.81
—
$106.60
Special Offer
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 138 )
$103.99
—
$109.99
ACDelco GM Genuine Parts manifold absolute pressure sensors measure the intake manifold pressure, and are GM-recommended replacements for your vehicle's original component. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. GM Genuine Parts manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
( 24 )
$81.99
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$61.47
—
$89.10
The knock sensor is able to detect mechanical stress and produces a voltage when the car knocks or pings. Under heavy acceleration, it sends signals to the ECU and the ECU retards the ignition timing to compensate for the knocking, which in effect protects the pistons and rings from damage. Knocking also occurs when using low-grade fuel and having the knock sensor allows you to use different grade fuels without causing engine damage. Holstein Parts focuses on using only the highest quality materials, manufactured to exacting standards for an aftermarket product that is truly built to match or exceed the OE part. Holstein Parts knock sensors line has superior coverage for domestic and import applications.
( 3 )
$62.99
Summit Racing™ oxygen sensor extension harnesses are a must with full-length headers and other specific applications. These extension harness sets feature a direct plug-in design to eliminate the cutting and lengthening of oxygen sensor wires, along with high-temperature sleeving to help protect the wires from heat. They're available in a variety of plug styles, harness lengths, and other options. Order the pair recommended for your vehicle.
( 13 )
$59.99
ACDelco GM Genuine Parts steering wheel position sensors monitor your vehicle's wheel position and turning rate, helping to optimize steering and braking performance. These GM-recommended replacements have been manufactured to provide the same performance, durability, and service life you expect from General Motors.
( 4 )
$63.99
Malfunctioning MAP sensors can often cause problems, such as an intermittent check engine light, hesitation when accelerating, elevated emissions, and even poor engine performance. So, if yours is in need of replacement, do it with Delphi MAP sensors. These MAP sensors provide precise measurements of manifold absolute pressure. They are designed to perform in harsh environments, such as extreme temperatures, vibration, thermal and mechanical shock, and chemical contamination. Safeguard your engine with these quality MAP sensor components from Delphi.
( 19 )
$51.99
—
$63.99
When it comes to replacing critical electronic equipment for your GM vehicle, don't trust aftermarket suppliers to get it right. Rely on ACDelco GM Genuine Parts line of electronics. Built to match factory parts in fit, form and function, ACDelco GM Genuine Parts horns will let you keep your GM car, truck, or SUV "all General Motors." Order the model recommended for your specific application.
( 3 )
$54.99
ACDelco Gold manifold absolute pressure sensors are high-quality replacements for many vehicles on the road today. MAP sensors are part of the fuel and engine management system, measuring the intake manifold pressure. Their signal is used by the engine control module, along with the throttle position sensor, to calculate the amount of air entering the engine--so that the correct amount of fuel is injected for optimum combustion. Order the model recommended for your application.
( 8 )
$89.99
ACDelco spark plug wire sets meet or exceed original equipment specifications for fitment and performance. They're made from top-quality materials, so you know they'll last. The assembled ignition wires are available with different terminal ends and boot ends. Over 700 sets are available to cover virtually any vehicle on the road today. Order the spark plug wires recommended for your application.
( 149 )
$94.99
—
$102.99
Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.
( 99 )
$79.99
—
$82.99
Taylor Street Thunder spark plug wire sets offer great performance at an affordable price. They feature 8mm diameter black silicone construction with synthetic jacketing to resist heat, oil, and abrasion. Their 500 ohm per ft. resistance delivers greater spark energy, while improving power and fuel efficiency. By using a Kevlar® helically spiral-wound core conductor, Street Thunder wires provide greater strength and durability to suppress electromagnetic and radio frequency interference. Matching black silicone boots protect against high exhaust temperatures and double spring locking terminals make quick vibration-proof connections. Taylor Street Thunder spark plug wires are available in universal, race-fit, or custom-fit styles. Select the set that best suits your application.
( 443 )
$50.90
—
$68.40
Dragon Fire Race Series spark plug wire sets feature the perfect combination of ultra-high heat resistance and reliable high-voltage delivery to outperform and outlive most other wires. Their multi-layer construction and industry-leading, spiral-wound conductors provide maximum voltage transfer, regardless of your coil type. Make strong spark delivery one less worry when building your ultimate performance project with a specialized set of Dragon Fire 3000 Race Series spark plug wires. Features and specs: * Extra-strong high-grade copper/stainless steel terminals * Superior EMI/RFI suppression technology * 500 ohm ultra-low resistance * Extra-thick-walled German-made silicon boots and jacket (600 degrees F-rated) * Silicon or ceramic boot options * Available boot angles include: 90, 135, and 180 degrees * PentaCore alloy conductor technology * Military-grade aramid fiber core support * Assembled in ISO9001:2015 and ISO/TS 16949:2009 certified facilities under strict quality control to ensure each wire is perfectly crimped and assembled for strength and perfect fitment for life * Designed for off-road use only
( 26 )
$59.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
