Availability
Showing In Stock Items. Show All 48 Items.
On Sale
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 433 )
$65.75
—
$79.09
$59.15
—
$71.15
On Sale
ACCEL performance spark plugs produce a larger spark for more power at high rpms. They improve throttle response and fuel economy and reduce fouling. Their purified Alumina insulator prevents arcing, and their machine-rolled threads protect heads.
( 289 )
$57.49
$51.75
On Sale
Bigger, better wire! Taylor 409 Race-Fit Pro Race spark plug wires start with Taylor's 8mm wires (available in spiral-wound or solid core) with a silicone inner insulator, fiberglass braid, and a 100 percent pure silicone jacket. Then they add a heat-treated fiberglass mesh skin and a third layer of pure silicone to get a full 10.4mm diameter. Taylor bonds pure silicone boots directly to the wires. The results are wires that have a 100,000+ V dielectric strength rating that gets more spark to your plugs.
( 157 )
$106.60
—
$114.05
$95.94
—
$102.64
On Sale
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
$70.35
On Sale
Taylor 409 Pro Race Spiro-Wound core spark plug wires are high-tech, high performance wires available for the street or track. They provide continuous heat protection up to 600 degrees F and 102,000 V of dielectric strength. A tightly woven, heat-treated fiberglass braid is applied over 100 percent pure silicone 8mm ignition wire. These sets are available in black, red, and blue with color-coordinated, 100 percent silicone Pro Boots bonded to the wires. They also feature vibration-proof, double spring locking plug terminals. The Spiro-Wound core is for use when RFI suppression is required for maximum firepower without radio interference. Taylor 409 spark plug wires are a must for multiple discharge ignition systems, onboard computers, and electronic ignitions. Order the set and options designed for your vehicle and engine application.
( 302 )
$102.90
—
$117.75
$92.61
—
$105.98
On Sale
Ensure that you have the finest distributor cap available by using one of these MSD replacement distributor caps. They're designed with performance in mind, are molded from a high-quality, voltage-insulating material, and use low-resistance terminals for maximum conductivity .
( 197 )
$61.45
—
$72.69
$55.35
—
$65.45
On Sale
ACCEL SuperStock 4000 Series spark plug wire sets will upgrade your OE ignition system for high-spark delivery levels and RFI suppression. They extrude the silicone jacket over a tightly woven, rugged fiberglass braid that meets or exceeds OE specifications. ACCEL offers their SuperStock 4000 Series wire sets in various color schemes to match nearly any application! More product features include: * Jackets rated up to 450 degrees F * 7mm or 8mm yellow, red, black, and blue silicone jackets * Orange and other color-matched spark plug boots with terminals * Available for pre and post-HEI vehicles * Custom-fit, universal, and import
( 133 )
$68.99
—
$79.05
$51.74
—
$71.15
On Sale
With their optimized winding design, PerTronix Flame-Thrower HEI and TFI ignition coils are a great upgrade from stock. They produce more than 50,000 V of energy to zap your plugs, for fuller, more complete combustion and better power. When used with their companion Flame-Thrower ignition modules, they produce more than twice the energy of a stock system at the plugs. They're wrapped in rugged alkyd housings and are available for both distributor-mounted and external applications.
( 63 )
$79.55
—
$96.00
$71.60
—
$86.40
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 622 )
$83.65
—
$155.95
$54.97
—
$101.95
On Sale
ACCEL HEI in-cap Super Coils provide more high-rpm power and overall performance. Compatible with both original and computer-controlled HEI ignition systems, ACCEL HEI in-cap Super Coils are designed to resist shock and vibration. They have a finned cover that aids cooling, and hardware is included.
( 41 )
$100.95
—
$123.95
$75.95
—
$92.96
On Sale
Taylor Street Thunder spark plug wire sets offer great performance at an affordable price. They feature 8mm diameter black silicone construction with synthetic jacketing to resist heat, oil, and abrasion. Their 500 ohm per ft. resistance delivers greater spark energy, while improving power and fuel efficiency. By using a Kevlar® helically spiral-wound core conductor, Street Thunder wires provide greater strength and durability to suppress electromagnetic and radio frequency interference. Matching black silicone boots protect against high exhaust temperatures and double spring locking terminals make quick vibration-proof connections. Taylor Street Thunder spark plug wires are available in universal, race-fit, or custom-fit styles. Select the set that best suits your application.
( 444 )
$58.10
—
$68.40
$52.29
—
$61.56
On Sale
PerTronix Flame-Thrower HEI III 4-pin ignition modules feature multiple sparks through the entire RPM range, plus an integrated high resolution digital rev-limiter. The rev-limiter settings are displayed with a LED feedback for precise RPM settings. Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil performance and module reliability. The PerTronix Flame-Thrower HEI III 4-pin ignition modules adjusts spark timing at higher RPMs to compensate for the inherent electronic delay and they can sense startup and increases energy for quicker, easier starting.
( 47 )
$112.95
$101.66
On Sale
Taylor Spiro-Pro spark plug wire sets are the finest high performance street and race wires available today. They offer maximum firepower without radio interference, provide up to 10 times less resistance than standard resistor core wire—and are a must for electronic ignitions, on-board computers, stereos, and pit radios. Other features include: a 100 percent silicone inner and outer jacket that provides heat protection up to 600 degrees F; low-profile silicone boots with grips; and double spring locking spark plug terminals for a secure connection. The wire sets are available in a variety of boot and distributor terminal ends, assembled or not, and nine vibrant color options. Order the universal or vehicle-specific set that best suits your application.
( 662 )
$77.95
—
$105.00
$70.16
—
$94.50
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$87.15
—
$114.95
$78.45
—
$103.45
On Sale
These Extreme distributor caps from MSD are replacement covers designed to be installed on stock HEI distributor cams with no modifications.
( 8 )
$86.99
$78.25
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 643 )
$71.75
$64.55
On Sale
Pertronix Flame-Thrower ignition modules for GM and Ford distributors are direct replacements for the OEM modules and provide enhanced high-rpm performance. Flame-Thrower modules are available for most GM car and truck applications using both remote and in-cap coils in 4-pin, 7-pin, and 8-pin configurations. A Ford Thick Film Ignition (TFI-IV) module is also available (distributor mount only). Thick film technology on alumina ceramic substrates removes heat for greater accuracy and improved reliability, while laser trimming gives precise peak current control for increased energy output. Each module is tested twice with automated equipment to ensure trouble-free operation.
( 42 )
$70.00
—
$96.00
$63.00
—
$86.40
On Sale
ACCEL ignition control modules are designed to fit most stock or modified distributors. ACCEL ignition control modules come with solid-state electronics for high-coil output and superior reliability. The dwell control circuit ensures long, consistent coil charging, and the current control circuit protects against coil overheating and resists false triggering from the RFI of high-output coils.
( 45 )
$75.95
$56.96
On Sale
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 93 )
$79.09
$71.15
On Sale
ThunderVolt 8.2mm wires from Taylor are an easy, proven, dyno-tested way to gain more power—simply by changing your spark plug wires! These factory replacement, ultra-high performance ignition wire sets are loaded with features and benefits, including: * 50 ohms of resistance per foot * 100 percent silicone 2-layer jacket * Ferrite spiral-wound coated core * RFI and EMI-compatible for all ignition systems * Dyno-tested to outperform the competition * Superior spark energy * Increased horsepower * Significant torque gains * Smoother idle * Improved fuel economy * Universal, race, and custom fit sets available
( 651 )
$79.55
—
$113.50
$71.60
—
$102.15
On Sale
PerTronix's Flame-Thrower 7mm "Stock Look" spark plug wire sets are designed to give you the ultimate in high performance, while retaining a stock appearance. The core consists of a carbon-impregnated fiberglass center that is spiral-wound with stainless steel alloy. They also feature: * Low 500 ohm per foot resistance * Silicone jackets to resist high temperatures, moisture, oil, and chemicals * EPDM rubber inner insulation for superior heat resistance and the prevention of arcing and voltage leaks * Fiberglass reinforcing braid for added strength and flexibility
( 140 )
$73.20
—
$79.55
$65.88
—
$71.60
On Sale
Increase your throttle response, idle quality, and starting with these ACCEL remote Super Coils with included hardware. They feature higher energy output for top rpm power and work as direct bolt-in replacements. Super-charge your vehicle's energy requirements with the ACCEL remote Super Coils designed for it!
( 80 )
$86.77
—
$86.95
$65.08
—
$78.25
On Sale
Taylor High-Energy spark plug wire sets are an outstanding choice for replacement or a performance upgrade. These wires feature heat-resistant silicone jackets and boots, double spring-locking spark plug terminals for better gripping, an 8mm size for high-compression engines, and a resistor core to suppress radio interference. The spark plug wires can withstand temperatures of up to 500 degrees F—and they're available in a variety of options for distributor terminal and boot ends, assembled or not, and universal or direct-fit for specific applications.
( 222 )
$62.90
—
$65.10
$56.61
—
$58.59
On Sale
MSD offers universal wiring harnesses to simplify the installation of a MSD 6 Series box on late model vehicles. The harnesses plug in between the ignition coil and the factory coil connector. Four wires with corresponding colors and matching connectors then connect directly to the MSD 6 wires. These harnesses reduce the installation time, reduce or eliminate cut wires, and allow you to quickly convert back to the factory ignition.
( 48 )
$77.15
$69.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
