Availability
CADILLAC ELDORADO Ignitions & Electrical
Optima RedTop Starting 12-Volt Batteries
Optima RedTop Starting 12-volt batteries are the ultimate power source for cars, trucks, SUVs, hot rods, and other high-performance vehicles. They're engineered with unique Spiralcell technology, delivering a stronger burst of ignition power, while extending the battery life up to three times longer than conventional models. Maintenance-free RedTop AGM batteries are sealed, leak-proof, and resistant to vibrations—so you can mount them anywhere and in virtually any position on your vehicle. Order the Optima battery designed for your application, and expect a perfect start every time.
( 1533 )
$269.99
—
$319.99
Optima YellowTop Deep-Cycle 12-Volt Batteries
Optima YellowTop Deep-Cycle 12-volt batteries are high-performance, dual-purpose power sources. They're great for applications requiring repetitive amperage drain and quick recharging—like trucks with winches, commercial or public safety fleets, and vehicles loaded with electronics and accessories. YellowTops also power forklifts, tractors, and other heavy equipment. The maintenance-free AGM batteries deliver premium ignition starts, while sustaining high power levels even when system loads exceed the alternator output. Optima deep-cycle models are sealed, spill-proof, and can be mounted in most any position. They are far more resistant to vibrations than standard batteries, and will perform up to three times longer. For consistent power and faster recharges, order the YellowTop designed for your needs.
( 420 )
$319.99
—
$329.99
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1998 )
$143.95
—
$158.95
$129.55
—
$143.05
On Sale
MSD Blaster 2 Ignition Coils
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 444 )
$55.85
$50.27
Powermaster Street Alternators
Powermaster street alternators feature all of the quality construction and dependability the company is famous for. The "electrical generators" are available in a variety of amperages and styles, allowing you to choose the best model for your specific ride and the accessories you run. So whether you need an alternator for your truck, hot rod, musclecar, sport compact, or audio competition vehicle, Powermaster gives you the power you need to get it started and keep it going.
( 1827 )
$134.99
—
$192.99
Odyssey Drycell Batteries
Odyssey sealed rechargeable drycell batteries provide high engine-cranking pulses and are capable of 400 deep cycles. They can be installed on their sides or at any angle and have a 2-year storage life at 25 degrees C.
( 231 )
$429.99
On Sale
MSD Street Fire Spark Plug Wire Sets
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 439 )
$81.05
$68.00
—
$73.55
NGK V-Power Spark Plugs
NGK V-Power spark plugs offer economical performance for nearly any automotive application—and they're the only plugs with NGK's V-Groove technology. These plugs enhance ignitability, lower the voltage requirements of ignition systems, and have strong anti-fouling characteristics, while improving fuel mileage and acceleration performance. The V-Power plugs are also highly durable against electrical and chemical wear, making them long-life replacement plugs. Because of the V-Groove, the spark occurs at the edge of the center electrode—so heat is not absorbed by the electrode itself. This allows the flame kernel to expand quickly and efficiently for a complete burn and great performance. More than a hundred models are available, both universal and application-specific; order the plugs designed for fitment on your vehicle.
( 406 )
$2.99
—
$6.99
PerTronix Ignitor® Solid-State Ignition Systems
PerTronix Ignitor® solid-state ignition systems deliver more energy with greater timing accuracy. The secret lies in the trigger magnets, which spin with the rotor and operate a switching module that requires no external control box. These systems are immune to heat, oil, and debris—and install in about 15 minutes with only two wires to connect. They come with a switching module, hardware, and instructions. Ignitor® is an ideal choice for collector car restoration because it fits entirely under the distributor cap.
( 1006 )
$100.79
—
$189.92
NGK Iridium IX Spark Plugs
NGK Iridium IX spark plugs feature an ultra-fine center electrode that's designed just thick enough to ensure the maximum durability and life of the spark plugs—and just thin enough to create an accurate and consistent spark. They represent the ultimate evolution of spark plug technology and performance. Iridium is the hardest metal used in spark plugs today—six times harder than platinum. This allowed NGK engineers to reduce the voltage requirement for a spark. Iridium IX plugs are available in more than a hundred configurations for universal and vehicle-specific applications.
( 253 )
$8.99
—
$11.61
Powermaster PowerGEN Alternators
Powermaster PowerGEN alternators feature all of the quality construction and dependability the company is known for. They combine the looks of a generator with the output and reliability of an alternator. PowerGEN units offer one-wire operation, producing up to 90 amps, with a whopping 60 amps at idle—and a regulator is included with all models. Alternators are available in either black powdercoated, chrome, or polished finishes. Order the Powermaster PowerGEN replacement designed for use on your vehicle application.
( 168 )
$357.99
—
$522.99
MechMan S Series Alternators
MechMan S Series 6-phase alternators offer incredible output in a compact and durable package. The 240 amp models offer the best balance between peak output, and output at engine idle RPM; while the 320 amp models are all about max power and not designed to charge at low idle speeds. Both S Series alternators feature 12 diodes, twin rectifier plates, and outstanding airflow ensure long service life, even in severe conditions. These units come equipped with a smaller 1.75 in. diameter alternator pulley, and will require a slightly shorter drive belt to be installed for proper belt tension. Order the model recommended for your auto application.
( 33 )
$349.00
—
$599.00
Delphi Mass Airflow Sensors
Delphi mass airflow sensors are the OE parts that your vehicle should have come with! Their MAF sensors are new, not remanufactured, and feature fast response for outstanding performance over a wide range of ambient temperatures. Delphi mass airflow sensors are engineered to provide your ECM with continuous, precise information to ensure optimal performance, fuel economy, and reduced emissions. Give your vehicle new life--replace worn OE parts with Delphi mass airflow sensors.
( 103 )
$119.99
—
$121.99
PerTronix Ignitor Lobe Sensor Solid-State Ignition Systems
PerTronix Ignitor lobe sensor solid-state ignition systems replace breaker points and troublesome factory units with a dependable, self-contained, and maintenance-free electronic ignition system. The Ignitor has been called the "stealth" ignition because of its quick installation and nearly undetectable presence under your distributor cap. There is no "black box" to clutter the engine compartment. PerTronix Ignitor has proven itself in applications ranging from race cars to tractors. Order the model recommended for your vehicle, engine, and distributor application. Product features: * Delivers twice the voltage to your spark plugs—increasing horsepower, fuel economy, and spark plug life * 2:1 improvement over "points" in current fall time for increased coil output * No points to burn or moving parts to wear out * No magnetic sleeve or ring needed; uses existing distributor lobe for sensor trigger * Epoxy molding makes the module impervious to dirt, oil, grease, and moisture * Stable timing—no need for any adjustments * Will trigger most multi-spark CD ignitions * Available for 6 and 12 V negative and positive ground systems
( 209 )
$140.97
Powermaster Smooth Look Alternators
Powermaster smooth look alternators feature unique styling, with all sharp lines and edges blended for a truly smooth look. These alternators are available in a polished, brushed/satin, black powdercoated, or a chrome plated finish. They come with an exclusive tear drop design, detailed with features that match the case.
( 160 )
$147.99
—
$253.99
Davis Unified Ignition Dyna-Modules
Replace your stock HEI module with Davis Unified Ignition Dyna-modules for a crisper, smoother running engine. They have more electronic dwell than your stock, so the coil saturates longer and produces a more intense spark. Dyna-modules are available in different pin quantities to meet your application, and mount easily on the side of your distributor housing with minimal wiring. Quicker starting, better throttle response, and more low-end power can be gained with Performance Distributors Dyna-modules.
( 135 )
$69.99
PerTronix Ignitor II® Solid-State Ignition Systems
Not ones to leave well enough alone, the engineers at PerTronix set out to improve upon their highly successful Ignitor® ignition conversion systems. The Ignitor II® conversion systems have all of the same quality features as the original Ignitor®, plus a powerful microprocessor controller to deliver, on average, 4x more available energy between 3,000 and 5,000 rpm than standard ignition systems. They're an ideal choice for collector car restoration because they fit entirely under the distributor cap. Order the model recommended for your year/make, distributor and engine application. Features include: * Compatible with 12 V negative ground systems and any induction coil * High-rpm performance is improved when used with the PerTronix Flame-Thrower II super low- resistance (0.6 ohms) 45,000 V coil * Adaptive dwell maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance * Develops, on average, 2x more available plug voltage * Peak current level is reached just prior to spark for maximum energy without heat build-up, increasing coil and module life * Never change points again * Adjusts spark timing at higher rpm to compensate for the inherent electronic delay * Senses startup and develops more energy for quicker, easier starting * Built-in reverse polarity and over-current protection shuts down the system, preventing component damage * Cannot be used with solid core spark plug wires; suppression-style or spiral-wound spark plug wires must be used
( 295 )
$192.15
—
$201.46
Summit Racing™ Electronic Distributor Conversion Kit
Summit Racing™ Electronic Distributor Conversion kits allow you to Convert your factory single point distributor to a true 1 wire solid state ignition. Simply remove and replace your points and condenser with the solid state breakerless ignition module. Simple stealth 1 wire hookup is perfect for 100 point type restorations as it is undetectable. Never deal with breakdowns or adjusting worn or burned points again with a Summit Racing™ Electronic Distributor Conversion kit. • 1 Wire Hook-Up, just connect to the original points wire • Completely stock appearing • Fits inside 57-74 Delco Window cap distributors • Auto-standby prevents coil damage or dead battery if the ignition is accidentally left on • Active dwell control maintains high rpm spark energy while reducing coil heating at idle. • Hall effect rotary-vane sensor design compensates for worn bearings and distributor end play. • Magnetic sensor is unaffected by oil, dirt or other contaminants, unlike optical systems. • Over-voltage/over-current protected against damage from high amp battery chargers, reversed battery, or improper wiring • No distributor modification, disassembly, or removal is required , use SUM-RP20594 For New Repl. Black Ground Wire To Finish The Conversion.
( 15 )
$167.99
Powermaster HPR Small Frame Series Alternators
Powermaster small frame HPR small frame series alternators produces enough current to keep your electronics running and your battery charged. With over 145 amps at idle and 180 amps at top end, these Hairpin Replacement alternators deliver the charging capabilities you need. Features, specs and items may include: * Efficient internal components produce more output, while consuming less engine power * Voltage compatibility: 12 V * Designed as a direct replacement for four popular housings; straight 6.61 in. mount, 6.14 in straight mount, offset left 5.31 in. mount, and 2 in. spool mount * One-wire connection on most models * Supplied with a V-belt or serpentine pulley * Bolts into many aftermarket front accessory drive systems * Available with different finishes
( 21 )
$275.99
—
$338.99
On Sale
MSD HEI Coils
MSD HEI coils increase spark energy when used with MSD HEI HEAT modules. Now you can replace your stock coil with these high-energy unitized coils for HEI distributors. They have low-inductance, high-temperature windings which charge the coil faster to give you increased spark energy at higher rpm. The premium epoxy filled construction is designed to withstand harsh race applications, as well as the wear and tear that daily usage dishes out, and still deliver more spark energy to the spark plugs.
( 36 )
$125.95
$113.35
Summit Racing™ High-Output 4-Pin HEI Performance Modules
Summit Racing™ high-output 4-pin HEI performance modules feature a longer dwell time for better coil saturation. This equates to a hotter spark and better performance for your HEI setup.
( 14 )
$26.99
—
$55.99
On Sale
MSD Digital GM High Energy Modules with Rev Limiters
MSD Digital GM high-energy modules with rev limiters allow you to adjust the rpm limit between 5,000 and 9,000 rpm. True high-performance modules built for HEI distributors, they produce 50 percent higher coil drive currents than the stock module. This saturates the coil faster, which gives you more spark energy at top speeds. The results are increased horsepower and rpm range, and improved starting. When used with MSD's HEI coil, these plug-in modules create a potent high-energy spark to 9,000 rpm. MSD GM HEI modules replace all 4-pin modules used in HEI distributors with a vacuum advance canister. They can be used with factory, aftermarket, or MSD HEI distributors.
( 67 )
$181.95
$163.75
PerTronix Ignitor III® Solid-State Ignition Systems
These PerTronix Ignitor III® solid-state ignition systems feature an adaptive dwell that maintains peak energy throughout the entire rpm range, reducing misfires while improving engine performance. Peak current level is reached just prior to spark for maximum energy without the heat buildup, increasing coil performance and module reliability. They adjust spark timing at higher rpm to compensate for the inherent electronic delay, sense startup, and develop more energy for quicker, easier starting. The PerTronix Ignitor III® solid-state ignition systems have a built-in LED for user feedback confirmation of the rev limiter setting.
( 84 )
$195.96
Ridetech Ridepro E5 Ride Height Sensor Kits
Ridetech Ridepro-HP Ride Height sensor kits upgrade your existing Ridepro E5 pressure-based system. They work together to deliver the ultimate air suspension management systems measuring both pressure and ride height accurately. With the addition of Ridepro-HP, ride height and spring balance (loads) are established by comparing the position of the ride height sensor to the air pressure within each air spring. Your car is leveled with no cross loading, which is especially important for dynamic driving scenarios where quick transitions occur, such as high performance driving, sudden directional changes, and panic stops. Ridetech complete Ridepro-HP kits include and feature: * Four ride height sensors * Four ride height sensor linkage kits * Group harness * 1/4 in. sensor bolts with Nyloc nuts and flat washers * Mounting tabs, heat shrink tubes, and installation guide * Easy installation * Heavy-duty ride height sensors * Bendable linkage rods with rubberized rod ends * Weatherproof connectors and wiring harnesses
( 1 )
$525.00
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster