Availability
Looking for a complete monitoring package? Racepak IQ3D Drag Dash bracket bundles combine their popular IQ3 Drag logger dash with the most common V-Net sensors and V-Net extension cable to meet the needs of today's bracket racers. They are compatible with a long list of ECU systems. Racepak bracket bundles include: * IQ3D Drag Dash * Wiring harness (includes 2 programming buttons) * Driveshaft sensor (Note: driveshaft collar sold separately) * Oil pressure sensor * Water temperature sensor * Carburetor fuel pressure sensor and V-Net module * Transmission temperature sensor and V-Net module * 6 ft. V-Net cable * USB programming cable * Racepak Datalink II software * MicroSD card and reader
( 2 )
$2,349.95
Racepak IQ3s displays are complete replacements for your factory dash cluster. The digital gauges provide a visual for speed, turn signals, fuel level, high beam, parking brake, time, odometer, trip, and much more. Plus, IQ3s displays can connect to Racepak's optional GPS module, where mechanical speed input is not available. And, last but not least, they look fabulous! Racepak IQ3s street dash digital gauge feature points include: * Display standard road functions * Display up to 28 inputs via four pages * Blue backlight * Gear indicator * Eight user-defined alarms * User-defined 5-character sensor input names * User-defined shift light output * Shielded, low-luster display for sunlight viewing * Metric and English capable * CAN-based and OBD2 compatible * Connect to any of Racepak's V-Net data loggers
( 6 )
$1,299.95
Gather precise rotational speeds with rpm sensors from Racepak. They have a variety of sensors for engine, driveshaft, wheel, clutch, and ring gear to compile data, and the sensors are commonly used in conjunction with Racepak data logger units.
( 5 )
$13.12
—
$239.95
Collect exhaust samples accurately with Racepak air/fuel sensors. These A/F sensors come with a 13 in. pigtail cable and are compatible with either gasoline or methanol fueled engines. Gasoline application will display ratios between 9.55:1 and 20:1, while methanol will show from 4.22:1 to 8.7:1. Racepak air/fuel sensors can be used with all V-Net products, and can run on 12 to18 V battery systems.
Not Yet Reviewed
$129.95
—
$169.95
Racepak split collar and magnet assemblies provide mounting platforms for the magnets that trigger the sensor monitoring the revolutions of a shaft. They are typically used on rear-end yokes and couplers to deliver driveshaft rpm data. Racepak collars are available with either two or eight magnets. The 8-magnet collars help detect driveshaft rpm sooner than 2-magnet assemblies and are perfect for automatic transmission-equipped vehicles. Racepak split collar and magnet assemblies are available in a wide range of diameters to fit a variety of applications.
( 5 )
$139.95
The new Racepak V300SD Serialized Data Loggers include all of the features and benefits of their predecessors, but now also include built-in pre-configured data analysis channels—allowing you to make quick decisions based on real data between rounds at the track. The new secured loggers protect your vital system data with a serialization number that is unique for each individual logger. This feature also allows you to quickly organize logs between rounds. V300SD units are commonly used for Pro Stock, Pro Modified, Sportsman drag race classes, and Land Speed. DataLink software is included. Kits are available for car doors, dragsters, motorcycles, or with universal 20 ft. harness. * Out-of-the-Box, this system will data log: -- Engine RPM -- Driveshaft RPM (requires driveshaft collar sold separately) -- Accelerometer G-Meter -- Lateral G-Meter -- Battery voltage * List of pre-configured data analysis math channels are included in the DataLink V5 software: -- Engine vs. driveshaft ratio -- Clutch percentage slip -- Clutch slip ratio -- Trans ratio -- RR, LR, RF, LF shock velocity -- Average air/fuel ratio -- Average exhaust gas temperatures -- CC's per turn (for fuel flow) -- Track time -- G-Meter MPH, G-Meter distance (feet) -- 60 ft., 330 ft., 660 ft., 1,000 ft., 1,320 ft. clock markers Features: * With sampling rates of up to 1,000 frames per second, the V300SD series of data recorders allow you to monitor up to 83 channels of sensor information * Unlocked math channels for the following calculations: Clutch percentage slip, trans ratio, shock velocity, average AFR (air/fuel ratio), average EGT (exhaust gas temperature), G-Meter MPH—and many more * The included SD memory card allows you to transfer your vital sensor information to your laptop quickly, getting you back in the lanes without fumbling with cables * The 83 total channels break down as follows: 72 V-Net; 4 hard-wired analog; 4 hard-wired digital; and 3 internal sensors (battery voltage, accel/decel G-Meter, and lateral G-Meter)
Not Yet Reviewed
$1,749.95
Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.
Not Yet Reviewed
$1,699.95
—
$2,499.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$189.95
—
$224.95
If you're unable to use a thermocouple-style assembly due to limited space availability, Racepak liquid temperature sensors are a great alternate choice. These replacement sensors are for use with Vnet modules and require the adapter harness.
( 2 )
$38.52
—
$89.95
Racepak V-Net cable bulkhead connectors are used when a V-Net cable must pass through a firewall, body, or motor plate. They provide a male and female connector on each side of the panel.
Not Yet Reviewed
$149.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$229.95
—
$368.95
All Racepak V-Net systems must be equipped with a tee cable to install the two terminator caps (one male and one female) necessary for the operation of the system. Just like the ends on the V-Net cables, all V-Net tee cables and terminator caps are blue. Racepak interface modules can also use tee cables, but they are not required for the system to operate properly. Instead, they allow you to create a branch in the system. Black interface tee cables and dust caps are used for the purposes their names indicate. Racepak gauge tee cables are used to connect Intelli-Gauges to a V-Net cable. After the first gauge, each subsequent gauge is connected with a gauge-to-gauge jumper cable.
( 1 )
$15.75
—
$99.95
Racepak serial communications cables are used to transmit or download information from the V300/V300SD/V500 data recorders and your computer. There are a number of options available, such as serial to USB port, so you can find the cable that's right for your application. Load up Racepak, keep your data handy, and start your engines.
( 6 )
$39.95
—
$139.95
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$999.95
—
$1,599.95
Racepak IQ3 data recorders represent an entirely new concept in data logging dashes. By placing the 32-channel data logger, 512 MB memory card, GPS board, and 3-axis G-meter inside the dash, every feature of the data system is now located in one central location. This means that only one small cable will transmit the data from all the sensors to the rear of the dash. This eliminates the need for a sensor harness, greatly reducing installation time, complexity and overall weight. The programmable shift lights are protected from sunlight by a molded shield above the lights, while the low-glare LCD display is well recessed in the housing to provide viewing in all light conditions. The rear of the dash contains the connectors for the external GPS antenna and V-Net sensor cable—plus the power, ground, and engine rpm external programming button harnesses. All data is stored in a MicroSD memory card located in the front of the dash between the programmable shift lights. This design insures easy access to the memory card for data download.
( 1 )
$1,549.95
Racepak V-Net 5-pin cables are designed to connect multiple sensors to tee cables—which are then connected to the V-Net port and Racepak dash. They're manufactured from high-quality wire and feature pre-terminated Weather Pack connectors for a quick installation and easy removal.
( 2 )
$84.95
—
$124.95
Racepak universal sensor modules provide an efficient and cost-effective way to add vehicle data sensors. Fully programmable, these modules feature rugged housings with securely mounted O-ring lids, four cable inputs with water-resistant cable strain reliefs, and four molded mounting pads for easier installation. Racepak USMs are designed to allow you to add Racepak or personally supplied sensors to their IQ3 logger dash. Multiple USM 4 sensor input modules can be used in your setup and will create a neat, professional look under your hood. Want to use sensors you already have to save some money? Racepak universal sensor modules are the way to go.
Not Yet Reviewed
$349.95
Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 1 )
$106.95
—
$329.95
Keep track of the movement of your shocks with one of these Racepak shock travel modules. Designed for use with Racepak shock travel sensors (sold separately), they do not require any programming and can accept inputs from up to four individual shock sensors. When used in conjunction with Racepak's shock travel kits, critical shock and chassis adjustments can now be made with confidence through the use of shock travel data.
Not Yet Reviewed
$199.95
—
$329.95
Finish off your V-Net module using one of these Racepak V-Net cable terminator caps. They're available in either male or female configurations to fit your connection type.
( 1 )
$29.95
Racepak driveshaft sensor mount brackets allow you to easily fasten any 5/16 in. driveshaft sensor to a 9 in. center section. These L-shaped supports feature slotted mounting for easy adjustments and snag-free, rounded-off ends. No fabrication is necessary when you use Racepak driveshaft sensor mount brackets.
Not Yet Reviewed
$39.95
Monitoring and relaying the exhaust gas temperature (EGT) signals from each of your cylinders is done using components from three groups: the thermocouple which actually measures the exhaust temperature, the junction box which gathers the four thermocouple sensors on each cylinder bank into a group, and an EGT module that connects the two junction boxes to the Racepak sensor network. Racepak EGT components are built and designed specifically for all of those roles. Whether it is EGT probes, junction boxes and cables, or an EGT module you need, Racepak has the high-quality components you need.
( 1 )
$5.19
—
$13.12
Racepak Molex terminal kits are used to shorten a cable that needs to terminate. Available with 2- or 3-pin Molex connectors, they include both male and female connectors and corresponding pins. These connectors make it easier to assemble electronic products. Racepak stays ahead of the technology curve, developing data acquisition components for professional drivers and auto enthusiasts to achieve maximum performance!
Not Yet Reviewed
$11.95
—
$14.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.
Not Yet Reviewed
$349.95
—
$399.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
