Availability
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$229.95
—
$368.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules without sensors are analog function modules that have been programmed for general use, and have not been assigned to a specific task. Use of these modules on the V-Net cable requires the addition of a sensor and configuration of the module using DatalinkII software.
Not Yet Reviewed
$189.95
—
$224.95
Racepak universal sensor modules provide an efficient and cost-effective way to add vehicle data sensors. Fully programmable, these modules feature rugged housings with securely mounted O-ring lids, four cable inputs with water-resistant cable strain reliefs, and four molded mounting pads for easier installation. Racepak USMs are designed to allow you to add Racepak or personally supplied sensors to their IQ3 logger dash. Multiple USM 4 sensor input modules can be used in your setup and will create a neat, professional look under your hood. Want to use sensors you already have to save some money? Racepak universal sensor modules are the way to go.
Not Yet Reviewed
$349.95
Racepak V-Net modules work with the V-Net "smart data" transfer network to help you monitor a variety of functions and components on your vehicle. They feature plug-and-play installation on the V-Net cable for collecting the specific data you require. All connected modules are in series, so they can be installed and/or replaced in any sequence. Go ahead and build anything from a simple dash setup to a full-blown data acquisition system with Racepak V-Net modules. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 1 )
$106.95
—
$329.95
Keep track of the movement of your shocks with one of these Racepak shock travel modules. Designed for use with Racepak shock travel sensors (sold separately), they do not require any programming and can accept inputs from up to four individual shock sensors. When used in conjunction with Racepak's shock travel kits, critical shock and chassis adjustments can now be made with confidence through the use of shock travel data.
Not Yet Reviewed
$199.95
—
$329.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.
Not Yet Reviewed
$349.95
—
$399.95
Racepak un-programmed V-Net modules with sensors are customizable for a variety of applications. This makes them ideal whether replacing worn-out/damaged modules, or simply if you prefer your own programming for the V-Net system. The V-Net ID and sensor type parameters will not be pre-programmed on these modules. As with all V-Net modules connecting to the V-Net cable, they feature plug-and-play installation, and can be linked in any sequence. Repair or further customize your setup with Racepak un-programmed V-Net modules. Order the proper base pressure setting for your application.
Not Yet Reviewed
$329.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The module converts the signal so it can be transmitted over the V-Net. Unlike most V-Net modules, these digital pre-programmed modules do not require a sensor. They use the pulse from the component they are monitoring as the signal to the module. Racepak digital pre-programmed V-Net no sensors required modules are programmed for a specific use and are ready for plug-and-play installation on a V-Net cable.
Not Yet Reviewed
$199.95
Racepak GPS V-Net modules allow you to add a GPS sensor to any non-GPS equipped V-Net data recorder. They utilize a standard V-Net tee connector and install into the Datalink II software, providing a speed channel for analytical, display, and odometer information.
Not Yet Reviewed
$429.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. These pressure or temperature module/sensor combinations are the same as Racepak analog pre-programmed V-Net modules with sensors except that they have NOT been pre-programmed. Racepak analog programmable V-Net modules with sensors must be programmed using the Configuration File in Datalink software (not included).
Not Yet Reviewed
$13.35
—
$329.95
Racepak switch modules provide the ability to use existing switches in conjunction with a SmartWire module. Switches are connected to the spade connectors of the module, and switch data is routed to the SmartWire via a single cable. These modules allow your input for 16 remote switches. Adding a second switch module is quick and easy, through the use of a short jumper cable between the two modules. Racepak SmartWire switch modules are machined from billet aluminum and anodized black.
Not Yet Reviewed
$379.95
Racepak V-Net connector modules are used to convert the CAN data stream into a V-Net CAN bus data stream compatible with the Racepak V-Net system. This data is then available for use with the full range of Racepak V-net devices, including on-board displays, real-time telemetry, and data-logging applications. The Racepak V-Net connector modules provide setup capability to accommodate selection of scaling units, data-logging sample rates, and even custom sensor calibration.
( 2 )
$199.95
—
$399.95
For your data recorder to be able to monitor an analog channel it must receive a signal that it can recognize. The Racepak Module PT2 convert the analog parameters to a standard 0-5 volt signal required by the recorder. The transducer module (combination sensor and signal conditioning modules) provides direct connection to the measured parameter, such as fuel or oil pressure. The signal conditioning module allows the connection of remote sensors, such as thermocouples or position sensors, to the data recorder.
Not Yet Reviewed
$399.95
Clearance
If you're not using some of the Module PT2 hook-ups then you'll want a few of these Racepak Module PT2 block-off plates. They feature the four mounting holes and bolt-in position with no modifications.
Not Yet Reviewed
$14.99
$7.50
Racepak EFI V-Net Interface module cables are used to convert the serial data stream for an AEM EMS unit into a CAN bus data stream compatible with the RacePak V-Net System. Data from the module is then available for use with the full range of RacePak V-Net devices including on board displays, real time telemetry, and data logging applications.
Not Yet Reviewed
$389.95
When using a Racepak Pro Analog transducer box, Racepak plug-in, old-style, transducer modules are used to convert the input from various analog functions into signals that can be recognized by the recorder. Where required, a special cable is needed to connect the sensor to the transducer or signal conditioning module. Available modules include: * Pressure transducers, in ratings of 0 to 15/60/100/150/300/500/750/1500 psi * Vacuum transducer, 0-30 in. Hg * Battery voltage, 0-20 V input * Thermocouple amplifier, 0 to 500 degrees F * 0 to 5 V input, outputs 5 V to powered sensor * 0 to 5 V input, outputs 12 V to powered sensor
Not Yet Reviewed
$399.95
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules without sensors are programmed digital function modules ready for plug-and-play installation on a V-Net cable. You must add the appropriate sensor to the module.
Not Yet Reviewed
$199.95
Racepak analog transducer box adapter modules are V-Net adapters designed to allow users to monitor four analog inputs from Racepak transducer boxes. They are made of superior quality materials to ensure long-lasting durability and performance.
Not Yet Reviewed
$229.95
Racepak analog transducer boxes hold up to four drop-in pressure modules. They're perfect for Pro Stock and Pro Mod type race cars. The boxes allow you to run appropriate hose to your pressure source—and are available for naturally aspirated, nitrous oxide-injected, and supercharged applications.
Not Yet Reviewed
$369.95
—
$399.95
The name of the game in racing is traction, and keeping your tires firmly planted under all track conditions and surface abnormalities have become a science. Monitoring suspension deflection through shock absorber movement is the common method of tracking suspension and tire performance. Racepak users can employ these shock absorber travel sensors to monitor even the slightest amount of shock travel or tire shake. Shock travel graphs will provide you with the data you'll need to tune 'to the track' more precisely. These door car kits are available for front or rear shock travel. The front shock travel sensor kits contain two 4 in. linear shock travel sensors, two signal conditioning modules, and an analog extension cable. The rear shock travel sensor kits contain two 8 in. linear shock travel sensors, two signal conditioning modules and an analog extension cable.
Not Yet Reviewed
$1,349.95
—
$1,449.95
Gather precise rotational speeds with rpm sensors from Racepak. They have a variety of sensors for engine, driveshaft, wheel, clutch, and ring gear to compile data, and the sensors are commonly used in conjunction with Racepak data logger units.
( 5 )
$239.95
Racepak V-Net EGT sensor kits provide a smart single-wire connection to your race vehicle's network (V-Net). Designed for simple plug-and-play connections, these modules are pre-programmed for your convenience. Available in multiple sensor configurations and T-harness lengths. Expand your vehicle network to monitor exhaust gas temperatures with Racepak V-Net EGT sensor kits. Kits Include: * Four EGT thermocouples (available in multiple configurations) * Sensor junction box * V-Net T-harness (available in multiple lengths)
Not Yet Reviewed
$999.95
—
$1,599.95
Racepak AF1 single channel air fuel sensor packages are designed to be utilized with any of Racepak's Vnet (canbus) series of data loggers. They are suitable for use with gasoline or alcohol, with calibration values available for either fuel types. The power supply requirement of 12 to 16 volts enables use with standard 12 volt or 16 volt high performance batteries. Racepak AF1 single channel air fuel sensor packages include: * Heat and water resistant controller with integrated Vnet module * Bosch LSU air/fuel sensor * Wiring harness * Installation instructions * Programmable 0-5 Volt analog output
Not Yet Reviewed
$499.95
Looking for a complete monitoring package? Racepak IQ3D Drag Dash bracket bundles combine their popular IQ3 Drag logger dash with the most common V-Net sensors and V-Net extension cable to meet the needs of today's bracket racers. They are compatible with a long list of ECU systems. Racepak bracket bundles include: * IQ3D Drag Dash * Wiring harness (includes 2 programming buttons) * Driveshaft sensor (Note: driveshaft collar sold separately) * Oil pressure sensor * Water temperature sensor * Carburetor fuel pressure sensor and V-Net module * Transmission temperature sensor and V-Net module * 6 ft. V-Net cable * USB programming cable * Racepak Datalink II software * MicroSD card and reader
( 2 )
$2,349.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
