Availability
Replace your worn-out distributor adapter pigtails with Painless Performance! Painless Performance LT1 distributor adapter pigtails are designed to be original-style replacements for LT1 distributors.
( 4 )
$29.99
Painless Performance 27-circuit Classic-Plus customizable GM truck chassis harnesses are designed to fit a wide range of trucks, Blazers, and Suburbans—whether C10, C20, or C30. They feature a factory-style bulkhead connector, allowing for easy mounting of the fuse block in the factory location, and have many factory connectors already installed on the harness out of the box. Each wire is custom-printed with the circuit identification, as well as using the GM color codes for easy installation. Wire your Squarebody once—and wire it right with these Painless 27-circuit Classic-Plus customizable GM truck chassis harnesses! Additional features and benefits include: * Each harness comes open-ended (headlight and taillight wiring) with extra length and can be paired with light socket kits (also available by Painless, but sold separately) * Included connectors for: the headlight switch, dimmer switch, wiper motor, ignition switch, blower motor and switch, blower resistor, and instrument cluster
( 36 )
$679.99
Painless Performance 21-circuit direct-fit Jeep CJ harnesses are fully grounded for use with fiberglass Jeep bodies. Almost every circuit on these 3-section harnesses are pre-terminated at both ends. Painless uses an OEM-style bulkhead connector that attaches to the bulkhead without any special brackets or modifications. The blade-type fuse block wiring is factory terminated and machine crimped. Each wire is custom printed with the circuit identification as well as using factory color codes for easy installation. These harnesses are not equipped for computer controls, nor is it engine specific. Water temperature sender, oil gauge sender, alternator, starter solenoid, tach lead, ballast resistor, and fuel tank sender are not pre-terminated. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Turn signals * Under hood light * Wipers and washer pump
( 27 )
$899.99
Painless Performance 21-circuit 1967-77 direct-fit Ford F-Series harnesses are the perfect upgrade for your Ford truck. They use many of the factory connections and are already pre-terminated. Each harness features a unique covered micro-fuse block with a 20 amp auxiliary relay circuit for accessories, such as fog lights, or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory (relayed) * Accessory/cigarette lighter * Backup lights * Brake lights * Cargo Lamp * Charging * Dome light * Electric choke * Emergency flashers * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Turn signals * Wipers and washer pump
( 9 )
$774.99
Painless Performance 27-Circuit Classic-Plus Chevy chassis harnesses are designed to fit the 1955, 1956, and 1957 "Tri-Five" models (150, 210, Nomad, and Bel Air)—and they include additional circuits for power options and accessories. The harnesses feature a factory location Painless mounting plate for the fuse block, front and rear lighting sockets, factory and aftermarket instrument cluster harnesses, and dash and turn signal connectors. They utilize GM color-coded high-grade TXL wire with the circuit identification printed on it for easy installation.
( 10 )
$605.99
Nothing could make re-wiring your Chevy/GMC truck any easier than Painless Performance harnesses. By adding a factory-style bulkhead connector and additional GM connectors, Painless made their universal harness a custom fit for these popular 2x4 and 4x4 GMC/Chevy pickups. These harnesses will work on pickups, Blazers and Suburbans. Includes circuits for: * Air conditioning * Heat * Camper cover lights * Cigarette lighter * Four wheel drive switch * Backup lights * Charging * Cruise control * Dome light * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn (relay) * Ignition coil * Instrument panel lighting and gauges * Park lights * Power antenna * Power door locks * Power windows * Radio/clock (constant and switched) * Starting * Taillights * Third brake lights * Turn signals * Wipers and washer pump
( 43 )
$635.99
Painless Performance 22-circuit direct fit 1965-66 Mustang chassis harness have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature auxiliary circuits with a 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 12 )
$896.99
Painless Performance 26-circuit 1970-72 Direct-Fit Chevelle harnesses give you everything you need, plus more! Not only are there provisions for connecting standard factory components, they also offer what you need for aftermarket parts. Various pigtails and light sockets are provided, so the harnesses easily fit mismatched cars (1971-72 cars with 1970 front ends, or 1970 cars with 1971-72 rear bumpers). The gauge cluster pigtail allows for the square "full sweep dash" harness and includes a Super Sport cluster pigtail. This makes it easy for those with a full sweep dash to swap to an SS-style cluster at a later date by undoing only one connector and plugging in the separate pigtail. Additional details: * Harness follows the same routing as the factory harness—allowing you to use OE attachment points * Numerous components have the connectors and terminals pre-installed to make connections plug-n-play * All exterior lights have the correct sockets and bulbs pre-installed * Extra length is added to the headlight section to be routed behind the driver side inner fender for a cleaner look * 6-gauge charge wire and 100 amp MIDI fuse * Fully integrated ground circuit * Factory-style precision molded fuse block can easily be installed in the OE location * Updated ATC-style fuses ensure that the 26 circuits stay protected and safe * Backside of the fuse block has an OE-style bulkhead connector so no trimming or cutting of your firewall is required * Plug-and-play design makes the install easy, no matter your options * Included console harness can be easily added at any time * Each pre-terminated connector is tagged for easy routing and installation * 120+ page manual is full of color schematics, photos, and step-by-step instructions Notes: * Options not supported in these harnesses are: the TCS relay, convertible top, rear defrost, wiring for the factory power window/locks, and factory A/C wiring * The switch power wire for OE power window/locks and A/C are included * Also included is a blower motor harness for heat-only systems
( 10 )
$1,014.99
Painless Performance 24-circuit 1967-68 Camaro and Firebird harnesses are designed as direct replacements for your vehicle. They use a 1969 and newer style bulkhead connector design along with blade fuses and enough circuits to wire up just about any installed upgrade to your 1st generation F-body. Some minor bulkhead modifications are required. Factory original quick connect terminals are included for the in-dash printed circuit board. Each harness includes a detailed manual and each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Accessory/trunk light * Backup lights * Brake lights * Charging * Dome and courtesy lights * Electric choke * Electric fuel pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Power door locks * Power windows * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Third brake light * Turn signals * Wipers and washer pump
( 18 )
$584.99
Painless Performance 23-Circuit chassis harnesses are the most comprehensive wiring harness available for your 1966-1977 Ford Bronco. Utilizing input from the early Bronco community and after months of research and development this new precedent in Bronco wiring has emerged. Features include: * Ford color coded wiring to match factory schematics * Full weatherproof design * Composite glove box for mounting the main 20 circuit weatherproof fuse block * 9 accessory wires pre-wired on individual circuits in the fuse block allow each harness to be custom tailored to each vehicle * 2 fused fuse blocks, a turn flasher and hazard flasher, and horn relay * Full color 80 plus page instruction manual * Full lifetime warranty
( 1 )
$894.99
Painless Performance 22-circuit 1969-70 Mustang chassis harnesses have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature an auxiliary circuit with 20 amp relay for accessories, such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 6 )
$863.99
Painless Performance 22-circuit 1967-68 Mustang chassis harnesses have many of the factory connectors already installed on the harnesses out of the box. They use unique covered micro-fuse blocks and also feature an auxiliary circuit with 20 amp relay for accessories such as fog lights or an electric fuel pump. Each wire is custom printed with the circuit identification as well as using Ford color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory relay * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Courtesy and dome lights * Electric choke * Emergency flashers * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate lights * Turn signals * Wipers and washer pump
( 10 )
$789.99
Painless Performance Pro Series wiring harnesses provide you everything you need to properly wire up your pro-touring or custom ride the first time. The Pro Series allows for customization of the harness by providing ample length wiring—so you have the freedom to route and cut the harness to fit your exact setup. Included are over 25 GM factory-style connectors, allowing you to turn the Pro Series harness into a direct-fit harness for your application. With built-in grounds for the lights and high-current charging capacity, the Painless Performance Pro Series wiring harnesses will ensure your ride meets the demands of today's electrical requirements. Available for cars and trucks in 23- and 25-circuit options with or without a bulkhead-style firewall mount, each model gives you the freedom of the Painless customizable harnesses—with the fit of the Painless direct-fit harnesses.
( 44 )
$544.99
—
$604.99
Painless Performance 26-circuit 1969 direct-fit Chevelle harnesses deliver everything you need, plus more! These kits offer provisions for connecting standard factory components, as well as what you'll need for aftermarket components. This includes options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. The 26-circuit harnesses follow all of the same routing found on the factory harnesses, which allows you to utilize the factory attachment points—and extra length has been added to the headlight section to be routed behind the driver side inner fender for a cleaner look. True to their name, Painless Performance supplies what you need for a trouble-free, headache-free wiring job. The 26-circuit 1969 Chevelle harnesses include: * Numerous components with the connectors and terminals pre-installed to make connections plug-n-play * Exterior lights with the correct sockets and bulbs pre-installed * 6-gauge charge wire and 150 amp MIDI fuse * Fully integrated ground circuit * 120+ page manual full of color schematics, photos, and step-by-step instructions
( 7 )
$961.99
Painless Performance 26-circuit 1968 direct-fit Chevelle harnesses deliver everything you need, plus some extras! These kits offer provisions for connecting standard factory components, but also what you'll need for aftermarket components. This includes options like a console sub-harness, two gauge cluster pigtails, and even a fully integrated ground circuit. The 26-circuit harnesses follow all of the same routing found on the factory harnesses, which allows you to utilize the factory attachment points, with extra length added to the headlight section to be routed behind the driver side inner fender for a cleaner look. True to their name, Painless Performance supplies what you need for a trouble-free, headache-free wiring job. The 26-circuit 1968 Chevelle harnesses include: * Numerous components with the connectors and terminals pre-installed to make connections plug-n-play * Exterior lights with the correct sockets and bulbs pre-installed * 6-gauge charge wire and 150 amp MIDI fuse * Fully integrated ground circuit * 120+ page manual full of color schematics, photos, and step-by-step instructions
( 2 )
$934.99
Painless Performance 23-circuit direct-fit Jeep YJ harnesses fit 1987-91 YJ Jeeps. These harnesses feature a factory-style bulkhead connector that mounts the fuse block in the OEM location. Each harness includes all the connectors and terminals needed as well as a detailed manual. Painless harnesses are factory color-coded and labeled for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome and courtesy lights * Electric choke * Electric fuel pump * Emergency flashers * Fan relay * Fuel injection power * Fused power source * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and trailer lights * Third brake light * Turn signals * Wipers and washer pump (front and rear)
( 4 )
$999.99
Painless Performance EFI harnesses are designed for the 1998-2002 LS1 mechanical throttle body engines using a 1999 and up LS1/LS6 ECM with a 4L60E/4L65E automatic or T56 manual transmission. These engines were found in 1998-2002 Camaro and Firebird. These GM LS1/LS6 harnesses will also work on 1997-2004 Throttle-By-Wire (TBW) LS1/LS6 engines which have been changed to mechanical throttle body or any 1999-2006 (4.8, 5.3, and 6.2) Vortec truck engine which has been changed to a factory or aftermarket LS1 intake manifold, mechanical throttle body, and injectors.
( 1 )
$769.98
Do you need to convert or repair your existing multi-port fuel injection harness? These Painless Performance fuel injector wiring connectors enable you to repair crushed or broken connectors on your factory harness and will also allow you to convert over to the EV6/USCar injectors that can be found on modern multi-port fuel injection systems. Painless Performance fuel injector wiring connectors contain the necessary terminals, seals, terminal locks, and connectors to fit 8 injectors.
( 20 )
$6.99
—
$39.99
Painless Performance CirKit Boss Heavy-Duty Auxiliary Fuse Block/7 Circuit kits allow for the addition of seven fused circuits to your already existing factory fuse block. Simply mount the fuse block and relays, route the large 6-gauge wire to the battery, route the ignition wire, and then route the seven accessory circuits to the accessories needing power. The main power wire is 8 ft. long from fuse block. Each accessory circuit has 8 ft. of wire length from fuse block. The CirKit Boss kits are add-on, relay-activated fuse blocks, activated by a small wire from any ignition source. They help protect bulbs, accessories, and computers from the harmful spikes that may occur in a poorly connected power supply. These CirKit Boss kits include two 70 amp SPST relays, two relay bases/fuse block harnesses, and crimp-on terminals, along with the mounting hardware. Additional information for CirKit Boss kits: * All CirKit Boss units are made using TXL cross link polyurethane wire rated to 275 degrees at 600 V * Safely adds ignition hot and constant hot circuits * Circuits are individually fused * All wires are factory machine-terminated for reliability * Fuse style ATO/ATC
( 1 )
$158.99
Painless Performance 21-circuit customizable Chevy II/Nova harnesses have many of the factory connectors already installed on the harnesses out of the box. They are split into three sections (engine, dome light, and rear) for easy installation and troubleshooting. You'll also find a harness for the factory air, a high-output alternator pigtail with the connector installed, two door jamb switches, 12 instrument panel light bulbs, eight harness mounting clamps, a custom Painless mounting plate for the fuse block, and each wire is custom printed with the circuit identification, as well as using GM color codes for easy installation. Includes circuits for: * Air conditioning/heat * Accessory/cigarette lighter * Backup lights * Brake lights * Charging * Dome light * Electric choke * Emergency flashers * Fan relay activation power * Fused power source * Glove box light * Headlights * Horn * Ignition coil * Instrument panel lighting and gauges (see notes above) * Parking lights * Radio (constant/ignition hot) * Starting * Taillights and license plate light * Turn signals * Wipers
( 6 )
$592.99
If you want to keep your race car streetable and want to use all of your factory switches instead of a switch panel, Painless Performance 21-circuit Pro Street chassis harnesses are for you. Each wire is labeled and is pre-terminated at the fuse block for easy installation. They also include an optional connector if you want to use a GM column mounted ignition switch. Also, with each harness is a terminal assortment kit, with the necessary connectors for your turn signal switch, headlights, and alternator. Each wire is custom printed with the circuit identification as well as using GM color codes for easy installation. Includes circuits for: * Accessory #1 * Accessory #2 * Brake Lights * Charging * Dome light * Electric fuel pump #1 * Electric fuel pump #2 * Electric water pump * Emergency flashers * Fan relay activation power * Fused power source * Headlights * Horn * Ignition coil * Park lights * Radio and gauges B+ * Starting * Taillights * Third brake light * Turn signals * Wipers
( 6 )
$327.99
Painless Performance Jeep CJ Duraspark II ignition wiring harnesses are designed to easily convert the old points-style components in your electronic ignition systems to a modern Duraspark II system. A wiring harness is, first and foremost, engineering; Painless engineering assures you that your headlights shine, the blinkers blink, and the engine starts. These harnesses allow for the factory location of your module and coil, and are recommended if you are also replacing the chassis harness. You'll find a harness compatible with Jeep CJ models as far back as the mid-1960s.
( 7 )
$99.99
Painless Performance headlight door wiring harnesses feature a bulletproof, OEM-style fuse block. They include factory connectors and wiring to function the original equipment headlight door activators. Order the model recommended for your vehicle.
( 2 )
$124.99
Painless Performance headlight plug wiring harnesses are designed to fit your factory headlight plug for easy installation. They include a standard OEM connector and 12 in. long wire harness. Sold in pairs.
( 24 )
$12.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
