Availability
MSD Pro-Billet distributor plugs with cam sync are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a Hall-effect cam sync signal needed for the EFI system to reference the #1 cylinder. For wet sump applications, the plug also drives the oil pump. MSD cam syncs are plug-and-play with Holley EFI systems, and can easily interface with most aftermarket EFI systems. MSD cam sync plugs feature: * Built-in LED makes set-up and indexing quick and easy * Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal * CNC-machined billet housing with black anodized cap provides good looks and excellent durability * Available with cast melonized, steel, or bronze distributor gear, depending on the application * Chevrolet version is supplied with an adjustable slip collar for blocks with a non-standard deck height
( 8 )
$349.95
—
$435.95
MSD Power Grid wide band oxygen sensor modules provide valuable air/fuel ratio data to your MSD Power Grid, data logger, or air/fuel ratio gauge. These modules feature: * Plug-and-play with MSD Power Grid * Easy set-up; no free-air calibration required * Completely sealed unit for durability in race environments * Bosch 4.9 oxygen sensor * 0 to 5 V output to run an air/fuel gauge or data logger * Dual-color LED provides on board diagnostics * Multiple modules can be used on a single Power Grid * Data logs air/fuel ratio and heater voltage * Fuel calibration options for gasoline, methanol, ethanol, E85, propane, and diesel * Custom fuel calibration option can be programmed by user
( 2 )
$334.95
MSD Power Grid wide band oxygen sensors are replacements for the MSD Power Grid wideband O2 sensor module. The LSU 4.9 is the robust design combined with a high production quality standard. They will also work with Holley Sniper EFI and Terminator X Systems. MSD Power Grid wide band oxygen sensors feature anti-seize pre-applied to sensor threads for an easy install and removal, and they are compatible with gasoline, methanol, ethanol, E85, propane, and diesel.
( 1 )
$184.95
—
$299.95
MSD Atomic TBI throttle position sensor modules are designed for use with the MSD Atomic throttle body fuel injection system. They connect inline to the Atomic TBI communication network and provide a common 0-5 V throttle position output signal required for the operation of an electronic overdrive transmission or other accessory.
( 3 )
$299.95
On Sale
The pressure inside your intake manifold is extremely important input to the ECU—so a quality MAP sensor from MSD is crucial to your engine's performance. These replacement sensors will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 to 5 V. They're available in several different versions for naturally aspirated engines, as well as engines with forced induction.
( 11 )
$179.95
$73.69
—
$184.95
The MSD NTK wideband 02 module can be expanded to operate with a second monitoring channel and MSD offers several components for channel 2 operation. When you need more length MSD oxygen sensor extension harnesses provide 18 in. of length for Sensor 2 of your NTK module.
Not Yet Reviewed
$46.10
On Sale
MSD offers replacement wiring harnesses for the Power Grid Dual NTK wideband oxygen module—a dual channel air/fuel ratio (AFR) system designed to interface with the Power Grid (P/N 7730) to monitor and record the AFR of internal combustion engines. The oxygen sensor module is capable of measuring AFR as low as ? = 0.5 (7.35:1 gasoline AFR equivalent). The AFR range is configurable using the MSDView software in conjunction with the Power Grid Controller (P/N 7730). Excellent MSD range of the NTK sensor gives each unit the ability to accurately monitor AFR's even on alcohol cars. The MSD wideband oxygen sensor module also provides a 0.5-4.5 VDC analog output proportional to the AFR. This analog output can be sent to a gauge or a data acquisition system. A dual-color LED provides the system status at a glance. (To provide accurate backpressure compensated AFR readings on turbocharged applications, the addition of an Exhaust Pressure Module, part number 7767, is required.) MSD can provide a replacement main harness, sensor 1 harness, or sensor 2 harness for your application. Order the model needed to restore proper performance to your vehicle.
( 1 )
$65.35
$35.94
—
$99.95
MSD coolant temperature sensors produce a variable resistance from -40 degrees F to 302 degrees F. They thread into a 3/8 in. NPT female hole and include a matching 2-pin Weatherpack connector for a reliable positive lock connection.
( 2 )
$13.66
On Sale
MSD Atomic EFI TBI fuel pressure sensor kits are replacement support components designed to maintain your throttle body's performance. Atomic EFI systems by MSD were designed with two goals—to simplify EFI and improve overall performance. Simplicity is achieved through less wiring and fewer connections, and readily available replacement components such as these Atomic EFI TBI fuel pressure sensors. These support component kits include senor and O-rings to make it easy to uphold optimum performance.
Not Yet Reviewed
$87.15
$47.93
On Sale
MSD Power Grid exhaust module sensors are offered as replacements and enhancements for your module. Maintain the ability to obtain accurate data with replacement 0 to 75 psi exhaust back pressure sensors, or expand your module's abilities by adding an optional second pressure sensor with harness for dual turbo applications. Keep the operation of your Power Grid exhaust module at an optimum level with genuine MSD accessory sensors.
Not Yet Reviewed
$147.95
$110.95
MSD Power Grid Dual NTK Wideband O2 modules are plug-and-play units designed to monitor and record the air/fuel ratio (AFR) of internal combustion engines. These dual channel air/fuel ratio systems are designed to seamlessly interface with the MSD Power Grid system controller (sold separately), and come with an extension harness, along with all of the sensors, connectors, and parts necessary to accurately measure the AFR of vehicles running on gasoline and fuel containing alcohol. Features: * Plug-and-play Power Grid module * Works seamlessly with additional MSD Wideband oxygen sensor modules * No set up or calibration required (free air calibration is optional for added precision) * Can be expanded to operate with a second sensor * Fully potted and sealed unit with automotive-grade connectors * 0.5 to 4.5 V analog output voltage for a gauge or data acquisition * LEDs to monitor system operation and health * High-speed data acquisition (when used with the Power Grid controller) * Back pressure compensated AFR when used with optional exhaust pressure module (sold separately)
( 1 )
$799.95
On Sale
MSD Power Grid exhaust module replacement pressure sensor harnesses keep your module operating at optimum levels. These wiring harnesses are available for both sensor 1 and 2. For the best performance from your Power Grid module, choose genuine MSD replacement pressure sensor wiring harnesses.
Not Yet Reviewed
$33.63
$18.50
—
$33.63
After an MSD DIS-2 series ignition control is installed on the waste spark ignition system of some vehicles, the ECM of the vehicle will not be able to receive a cam sync signal. These MSD cam sync generators produce a cam sync signal after startup for the factory ECM. This is done by detecting a cylinder that is under compression through its signal wire, which is wrapped around the designated spark plug wire.
( 2 )
$106.95
The new Ultra 6AL Plus ignition boxes deliver full MSD power in a compact, lighter package! The Ultra 6AL Series continues to use a high-speed controller that can make extremely quick compensations to the output voltage, multiple spark series, timing and rpm limits, while maintaining precise timing and accurate rev limiting. The circuits and controller of the MSD have been thoroughly filtered to create protection against Electro Magnetic Interference (EMI). Ultra 6AL Series features a capacitive discharge ignition design. (The majority of stock ignition systems are inductive ignitions, in which the coil must store and step up the voltage to maximum strength in between each firing. At higher RPM, since there's less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy—which results in a loss of power or top end miss.) MSD Ultra 6AL Plus ignition box details: * High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery * High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 * Powerful capacitive discharge of multiple sparks improves performance * Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM * Increase spark series duration lasts for 18 of crankshaft rotation * Easily installs on 4, 6, 8-cylinder engines with distributors * Operates on most 7 to 28 volt electrical systems * Connects to points, magnetic pickups, and hall/crank input distributors * Bluetooth connectivity to mobile app interface for settings and monitors * MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product * Straight USB port to easily connect to MSDView using a laptop * Fully protected against an open coil, shorted coil and open load * Compact design full MSD power * Quickens throttle response and improves starting * Tach Output * Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app * Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value * Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation * Programmable Start Retard through rotary switches: 0, 10, 20 degrees * Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders * Alerts and monitors available * High level of security connection from phone to Ignition box (encryption), including sequence in push button implementation * Maximum programmable retard of 35 degrees * Programmable timing curves in 2D plots or 3D tables (RPM vs Timing vs MAP Pressure); you can plot the 3-D graph and edit a table 20x20 either from mobile app (phone) or from MSDView (laptop) * Programmable Launch Timing (seconds vs degrees after launch wire activation) * MAP sensor interface up to 400 kPA (58 psi / 4 Bars) * Capable of programming cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)
( 7 )
$467.95
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,099.95
On Sale
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$579.95
$302.95
—
$579.95
If you run a blower, turbo, or even a naturally aspirated engine, MSD's Boost Timing Masters allow you to run at the edge of detonation for maximum power output. They can prevent detonation by automatically retarding the timing as your manifold pressure increases. The secret lies in a boost pressure sensor that's inside MSD's solid-state control box. The sensor reads boost pressure through a 1/8 in. vacuum hose attached to a boost pressure source. The result gives you peak power without harmful detonation. A dash-mounted control knob allows you to dial in the retard from 1 to 3 degrees per pound of boost pressure, up to a maximum retard of 15 degrees. Vacuum tubing is not included. These units must be used with an MSD 6, 7 or 8 series ignition.
( 6 )
$926.95
As LS engines make their way onto the race track MSD is ready with the Circle Track LS ignition controls. You're off to the races with MSD. Circle Track LS ignition controls feature: * Direct plug-in to factory GM LS sensors and coils * Preprogrammed to run the GM CT525 crate engine out of the box * Laptop programmable rpm limit, timing curve, and coil selection for custom tuning * Auto detects coils, cam sensor, and crank sensor * Will run 24x 1x, 58x 1x, and 58x 4x crank/cam sensor combinations * Self-powered with USB for laptop programming * Steady, accurate timing control * Dedicated plug for Tech Official
Not Yet Reviewed
$549.95
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$632.95
—
$1,999.95
On Sale
These MSD 6-Hemi ignition controllers fire the coils and control the timing on Hemis that are retro-fit with a carburetor or late model factory electronic fuel injection. You program two separate rev limits and have a single-step retard adjustment. The MSD 6-Hemi ignition controllers connect easily, directly to the coils, crankshaft, cam, and MAP sensors for a simple installation. Wiring harnesses for installing on factory EFI engines are sold separately.
Not Yet Reviewed
$849.95
$552.95
MSD blank distributor caps are designed as replacements for MSD Pro-Billet dual sync EFI distributors using a direct ignition system kit. They can also be used on distributors equipped with two hall-effect sensors for crankshaft and camshaft signals processing sequential fueling and/or coil-on/near-plug (COP/CNP) applications. Simply remove the distributor cap and rotor for proper fitment. Order an MSD COP blank cap for dual sync distributors to keep your engine's spark plugs firing properly.
( 1 )
$32.91
MSD's DIS Series ignition control boxes are designed to easily convert an early style engine from a conventional distributor and single coil setup to eight individual coils. One coil per cylinder means no moving parts in a distributor to control the timing and no cap and rotor to wear-out. Timing is digitally controlled ensuring precision accuracy at all rpms and every firing. The DIS has advanced timing and rev-limiter functions for racers such as individual cylinder timing: timing retards for boosted and nitrous applications, a two-step rev-limiter, and launch control to get your car out of the hole and even data acquisition to help keep everything in check. Additional features and benefits: * Fully programmable 2D and 3D Timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Easily converts to a coil-per-plug ignition system * Preprogrammed timing maps * Built-in 2.5 bar Manifold Absolute Pressure (MAP) sensor for boosted applications * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable Max Rev and launch rpm limiters provide engine protection * Consistent Holeshot, thanks to Programmable Launch Timing Retard * Single timing step retard ideal for pulling timing for nitrous applications * Data acquisition allows you to keep an eye on all aspects of the ignition * Optional temperature sensor input to control timing based on temperature * Complete kits with all required components available
Not Yet Reviewed
$619.95
MSD MC-4 programmable ignition controls for motorcycles combine multiple spark discharge and digital computer accuracy into one compact ignition system, giving you the best of both worlds. You'll be able to program the MC-4s at the track, on the dyno, or wherever, with or without a computer! The supplied Pro-Data plus software gives you just what you have been waiting for--the ability to program ignition timing curves to suit your engine's needs. These MC-4 ignition boxes are for use with single or dual spark plugs per cylinder, and are 1, 2, or 4-cylinder selectable. Features include: * Computer interface for easy programming * 0-25 degree start retard * Mapable run timing curve * Launch ramp delay by time 0-2.5 seconds * 3-step retards by rpm or switch * 0-2.50 second step retard off delay for precise nitrous control * Progressive timing retard by time for progressive NOS * Launch timing curve to prevent tire slippage * Individual cylinder timing when optional cam sync sensor is used * Gear retard--retard a different amount for each gear * Shift kill feature with programmable delays 20-99 milliseconds * Shift kill modes for manual, auto 1, 2, and auto 1, 2, 3 * Optional boost retard curve when used with an external MAP sensor for turbo applications (2-45 psi) * Built-in rpm-activated window switch--turn "on" any device up to 3 amps at any rpm, then back off at a different rpm * Sequential shift light--turn on an optional shift light at a different rpm for each gear * Sequential shifter turns any air shifter into a fully automatic shifter (3 amps max) * Tach output wire for tachometers or data recorders * Monitor mode for easy setup or 3-step switches
Not Yet Reviewed
$1,599.95
On Sale
MSD 6LS Ignition harness allow you to easily connect the 6LS-2 to a factory EFI system to take advantage of timing adjustments and settings. MSD's 6LS extension harness allows you to reach the front-mounted cam sensor on an early (24-tooth trigger wheel) LS2 when installing a 6LS Ignition Controller. The 6LS-2 Controller allows you to map a timing advance curve with MSD's easy-to-use Pro-Data+ software.
Not Yet Reviewed
$149.95
$82.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
