Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
MSD LS 2-Step Launch Controls
GM performance fans will be geeked to learn about MSD's direct plug-in 2-Step launch controls for LS engines. These units are easy to install with factory-style connectors for a splice-free installation. When you're staged, you can hold the pedal to the floor, while the rpm stays at a consistent level, producing consistent launches.
( 86 )
$357.95
MSD Circle Track LS Ignition Controls
As LS engines make their way onto the race track MSD is ready with the Circle Track LS ignition controls. You're off to the races with MSD. Circle Track LS ignition controls feature: * Direct plug-in to factory GM LS sensors and coils * Preprogrammed to run the GM CT525 crate engine out of the box * Laptop programmable rpm limit, timing curve, and coil selection for custom tuning * Auto detects coils, cam sensor, and crank sensor * Will run 24x 1x, 58x 1x, and 58x 4x crank/cam sensor combinations * Self-powered with USB for laptop programming * Steady, accurate timing control * Dedicated plug for Tech Official
Not Yet Reviewed
$562.95
MSD Ignition Control Units
MSD ignition controls are the most successful aftermarket ignitions ever made. The multiple spark design has won races and championships in every type of motorsport. MSD ignitions are consistent, reliable and durable, even under extremely harsh conditions. The results speak for themselves--more power, easier starting, quicker throttle response, smooth idle, and improved fuel consumption.
( 37 )
$562.95
—
$564.95
On Sale
MSD 8.5mm Super Conductor Spark Plug Wire Sets
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1990 )
$120.95
—
$280.95
On Sale
MSD DynaForce Starters
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 242 )
$460.95
—
$511.95
On Sale
MSD Replacement Boots
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 132 )
$16.62
$11.07
—
$42.80
MSD Replacement Spark Plug Wire Boot and Terminal Kits
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 105 )
$60.75
MSD Coil Pack Wiring Harnesses
MSD ignition coil pack wiring harnesses are designed to connect your ignition coil pack to your aftermarket or OEM ignition. They can be used on both carbureted and fuel injected engines, making them an excellent choice for any application.
( 24 )
$106.95
On Sale
MSD Flying Magnet Crank Trigger Kits
MSD flying magnet crank triggers use four magnets permanently embedded in an aluminum wheel. As the crank rotates, the magnets pass a non-magnetic pickup, which triggers the ignition. These MSD systems include a trigger wheel, pickup, CNC-machined aluminum mounting bracket, and hardware.
( 52 )
$716.95
—
$750.95
MSD APS Replacement Starter Solenoids
These replacement starter solenoids from MSD are direct replacements for your MSD APS starter only. Your starter solenoid is a vital part of your vehicle that relays a large electric current to the starter motor, which in turn sets the engine in motion. If it fails, you're not going anywhere. Don't take a chance with an old, questionable, or malfunctioning starter solenoid that could leave you stranded--replace it with a new one from MSD Ignition.
( 3 )
$80.09
MSD Pro 600 CDI Ignition and High-Output Coil Kits
When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$2,561.95
On Sale
MSD Smart Coils
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$995.95
$94.76
—
$1,299.95
On Sale
MSD Multiple Spark Coils and Coil Kits
MSD Ignition's Multiple Spark Coils (MSC) will fit in place of the stock GM LS coils and connect directly to the factory connectors. Once installed, you'll have the power and performance of higher energy sparks, crowned with MSD's multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high rpm performance!
( 26 )
$1,078.95
$152.95
—
$751.13
On Sale
MSD Pro 600 CDI Ignition High-Output Coils
MSD Pro 600 CDI ignition high-output coils developed these powerful coils to provide unrivaled spark energy and dependability. The best choice to equip your Pro 600 CDI, they have the highest current and voltage available in a small compact design, creating over 200 millijoules of spark energy and leaving no horsepower untapped. Along with the unrivaled output of your Pro 600 CDI, MSD high-output coils, everything from Pro-mod's to pulling trucks can perform at a whole new level! Features and benefits: * Designed for extreme racing for the Pro 600 Capacitive Discharge Ignition * Capable of up to 50,000 V to ignite extreme cylinder pressures * Over 200 millijoules of spark energy makes them ideal for use with methanol, ethanol, and E85, as well as forced induction and power adder combinations * Supplied with hardware to mount horizontal or vertical position * Coils are designed to be mounted on Holley's LS valve covers, or OE LS passenger car coil brackets using 72mm bolt spacing * HEI-style secondary tower for secure coil wire connection
Not Yet Reviewed
$790.95
$78.46
—
$921.95
MSD Pro 600 Replacement Wiring Harnesses
MSD carries replacement wiring harnesses for Pro 600 applications. If you damage a harness or are simply rewiring a car, MSD offers the exact harnesses that come from the factory with the Pro 600 CDI. The harnesses are made with the same quality wire and connectors as the originals and are the same length for an exact match. They're available for the Pro 600 ignition box to connect to EFI or LS engines—or to connect to an MSD power grid. Order the model needed for your purpose.
Not Yet Reviewed
$101.95
—
$134.95
MSD Pro 600 CDI Ignition Boxes
MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$1,229.95
—
$2,049.95
On Sale
MSD Blaster OEM Replacement Coils
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 629 )
$85.75
—
$767.95
On Sale
MSD Street Fire Coils
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 644 )
$62.89
—
$614.95
MSD Blaster GM Coils
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 88 )
$80.09
MSD Race Tailored Super Conductor Sleeved Spark Plug Wire Sets
MSD Race Tailored Super Conductor sleeved spark plug wire sets are equipped for the harshest race conditions. These ultimate performance 8.5mm wires combine extremely low resistance with the ability to suppress electromagnetic interference. They now come outfitted with high-temperature, silicone-fiberglass sleeving that protects wires up to 1,000 degrees F! MSD offers their Race Tailored Super Conductors with socket-type or HEI ends for routing under exhaust or over valve covers. Order the set recommended for your vehicle and engine application.
( 13 )
$267.95
MSD Pro Power Coils
When tested against a competitor's coil, the MSD Pro Power coils produced 33 percent more current at the plug. They have an oil-filled insulated polyester case, an extra-tall high-tension spark plug tower to stop voltage leaks, and rubber shock mounts. They're designed for drag race use only, with MSD 7 and 8 Series ignitions.
( 41 )
$188.95
—
$1,126.95
MSD Street Fire Spark Plug Wire Sets
MSD Street Fire spark plug wire sets deliver high performance at value prices. The wires feature 500 ohms per foot of resistance for improved spark delivery and power, with a helically wound conductor that suppresses EMI. They're also built to last and feature 8mm silicone and synthetic jackets to resist heat and abrasion, silicone boots to protect against high exhaust temperatures, and an Aramid core to provide great strength and durability. A crimping tool is included with universal sets.
( 438 )
$67.39
MSD Coil Brackets
Make installation a breeze with MSD ignition coil brackets. They're crafted from aluminum and are made for the specific purpose of keeping your coil braced.
( 6 )
$223.95
On Sale
MSD 6LS Series Ignition Wiring Harnesses
MSD 6LS Ignition harness allow you to easily connect the 6LS-2 to a factory EFI system to take advantage of timing adjustments and settings. MSD's 6LS extension harness allows you to reach the front-mounted cam sensor on an early (24-tooth trigger wheel) LS2 when installing a 6LS Ignition Controller. The 6LS-2 Controller allows you to map a timing advance curve with MSD's easy-to-use Pro-Data+ software.
Not Yet Reviewed
$149.95
$84.61
