Availability
On Sale
MSD offers these Power Grid 7 ignition boxes as part of the Power Grid 7 ignition system. These ignition boxes pack higher output than other current programmable units. When used with the Power Grid 7 system controller, these USB-compatible boxes offer advanced programming for ultimate control over your rpm and timing. They provide five retard stages for nitrous and four steps of rpm limits for burnouts, spool, launch, and overrev. MSD Power Grid 7 ignition boxes' output switch can be set on rpm, pressure, or time. Power Grid 7 ignition boxes have shift light settings for each gear, and the ignition data acquisition accepts multiple runs.
( 11 )
$718.95
$646.95
On Sale
Street Fire HEI distributors are the value-line brand from MSD Ignition. They offer a quality designed alternative to the bottom bargain parts that spring up in the marketplace. Knowing the importance of a centrifugal advance in a distributor, MSD engineers made sure the Street Fires include an advance assembly with coated weights and welded weight pins. The units are also fit with the same distributor gear that's used on the MSD Pro-Billet models. The metallurgy of this gear has been refined for years to perform through the harshest conditions. Inside, the ignition module and coil work together to produce a stout spark to light the fuel mixture for great performance. Order the Street Fire model recommended for your vehicle and engine application.
( 288 )
$217.95
—
$249.95
$196.15
—
$224.95
On Sale
MSD Power Grid system controllers are the brains behind the entire Power Grid system, and they can be used with any MSD ignition or Pro Mag to provide advanced ignition tuning capabilities. While they're compatible with all MSD ignition boxes, they've been specially designed to mount on top of the Power Grid 7 ignition box. Features include: * USB connection for easy programming * Timing based on engine rpm and gear value * Advanced individual cylinder timing based on gear or time * Five retard stages for nitrous * Four steps of rpm limits for burnout, spool, launch, and overrev * Output switch set on rpm, pressure, or time * Shift light settings for each gear * Ignition data acquisition accepts multiple runs * View software * Wiring harness * Micro SD-card
( 10 )
$649.95
$332.05
—
$1,399.95
On Sale
MSD Programmable Digital-7 CD Plus ignitions have an output power and Individual Cylinder Management timing system that are hard to beat. At the heart of these ignitions is a 15 MHz micro-controller that analyzes and manages every trigger signal. Their capacitive discharge circuits and state-of-the-art IGBT coil drivers work together to deliver a potent spark that can easily handle high cylinder pressures. Below 3,300 rpm, a series of sparks burn in the cylinder over 20 degrees of crankshaft rotation, producing a smooth idle with great throttle response. You can control all of this spark energy through an array of timing and rpm programs. These programs include: Individual cylinder timing that can program up to 10 degrees per cylinder in .1 degree increments, a launch retard that lets you retard the timing up to 15 degrees for 0-2.5 seconds after the launch, a launch timing curve, and a run curve enabling you to plot a timing curve in .1 degree increments per 100 rpm. They also feature a three-step retard, a gear retard that can retard timing up to 5 degrees with every gear change, a start retard, three rev limiters, a shift light, and an rpm-activated window switch. You can also map a complete timing curve for every gear, set stage retards to ramp timing, see updated X-Y plots with interpolation for smooth changes, view all ignition events in a new Launch History window, acquire 20 seconds of run data including two seconds prior to launch, program an rpm that is ramped in during the launch, and select vacuum advance and boost retard through a MAP sensor. They can be used on 4, 6, or 8-cylinder engines, and are supplied with the Pro-Data Plus software, PC harness, vibrations mounts, and wiring. An optional hand-held MSD Programmer Monitor is available separately.
( 3 )
$1,099.95
$988.95
On Sale
For racers that need serious spark output, the MSD Ultra 7AL ignition boxes are the right choice. Offering industry-leading spark energy output in a compact and efficient package, the Ultra 7AL includes four step retards, three rev limits and two rpm-activated switch outputs. The Ultra 7AL also features two different power output settings that can be used for on-the-fly changes which are perfect for drag-and-drive applications. All features are adjusted using plug-in modules including the 3-step rev control and multi-step retard. The rev control gives you the ability to set one rev limit for the burnout, another for the staging rpm limit and a third for use top end engine protection in the event of driveline failure. For nitrous fans, there are four separate stages that can be activated independently yet add up together. Plus, there are two rpm activated switch outputs that can be used for air shifters, shift lights or other devices that require a perfectly timed ground trigger! For increased output and proven multi-spark power, use MSD Ultra 7AL ignition boxes. Ultra 7AL multiple spark ignition control features and benefits: * High-output continuously delivers high energy for maximum performance even under extreme race or street conditions * Lighter, and over 50 percent smaller than the 7AL-3 model * Two different power output settings for on-the-fly changes for drag-or-drive situations * Twice the spark output of the 7AL-3, (330mJ vs 160mJ) * Adjustments made using plug-in modules for the 3-step rev control and multi-step retard * Rev control can set one rev limit for burnout, another for the staging rpm limit, and a third for high rpm engine protection * Quickens throttle response * Adjustable start retard can control the amount of retard pulled out during engine cranking * Adjustable switch for start retard settings eliminates the need for additional external wiring to the starter solenoid * Two rpm activated switch outputs (compared to the 7AL's single RAS output) * Two multi-colored status LEDs Emissions Note: This part is only legal for sale and use on uncontrolled (non-emissions controlled) vehicles or on vehicles used solely for the purposes of closed competition racing.
Not Yet Reviewed
$799.95
$718.95
On Sale
From light bulbs, to the high-speed retard function on an MSD timing computer, to air shifters, these MSD rpm activated switches turn on almost anything. They use MSD's plug-in rpm modules to turn on your components at any rpm you select.
( 18 )
$177.95
$160.15
On Sale
These MSD Chevy crate engine ignition kits make it easy to add MSD performance to your new crate engine. They come available with MSD's Pro-Billet HEI distributor for applications that have enough room to take advantage of an internal coil and large distributor cap. For applications with limited firewall clearance, MSD offers a kit with their Pro-Billet Ready-To-Run distributor and powerful Blaster SS coil. Both kits include a set of universal 8.5mm Super Conductor wires, Pro-Clamp wire separators, and a billet hold-down clamp. They have everything you need to light the fire in your new crate engine!
( 18 )
$799.95
$718.95
—
$999.95
On Sale
This MSD 2-Step launch controller connects right to your late model Ford to produce consistent launches and quicker 60-foot times by setting an rpm limit to stage with. When activated, the rpm will be held at a steady rpm and once the green light comes on, release the clutch and take off. The rpm is adjusted with two built-in rotary dials ranging from 1,800-9,900 rpm in 100 rpm increments. A handy LED shows when the launch rev limit is active.
( 8 )
$315.95
$284.35
On Sale
MSD tach signal GMR pickups simply attach, with no splicing or cutting, to a current-carrying wire, and turn that information into a 12 V rpm signal. That signal can then be used to activate a shift light, rpm activation switch, or tachometer.
( 7 )
$112.95
$101.65
On Sale
MSD Pro 600 CDI ignition boxes are 8-channel capacitive discharge ignitions designed for high cylinder pressure, high-horsepower engines running coil-near-plug ignition. When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. To answer this need, the ignition experts at MSD developed the PRO 600 CDI to provide unrivaled spark energy and dependability. Pro Mod to Pro Street, or yanking a sled in the dirt with a pulling truck, if you need to light 8 coils without fail, MSD PRO 600 boxes are the answer. Features include: * Eight outputs of up to 680 mJ of energy * All necessary wiring harnesses included * Continuous 600 mJ operation, without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kilovolts output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 volts minimum required for starting and running * 12 volts minimum required for 600 mJ opereation * Maximum operating voltage 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Reverse battery protection * Protection against shorted or open coils, and over temperature * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power operation * Fits most coil-per-plug engines up to eight cylinders (including 4- and 6-cylinders) * Additional CAN based features, when used with Holley EFI * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$1,199.95
—
$1,999.95
$1,078.95
—
$1,798.95
On Sale
MSD Ignition waterproof relay harnesses are ideal for use on electric fuel pumps, water pumps, cooling fans, off-road lights, and any other application that is exposed to muddy or wet conditions. Each is built with rugged connectors and pigtail harness with long leads and heavy-duty gauge wire. The connectors have wires molded in rubber and a gasket for a leak-proof seal. Features: * Waterproof relay with pigtail harness and sealed connector * Metal bracket for mounting underhood or just about any other location * Ideal for marine, dirt track cars, and off-road trucks and Jeeps * Works in normally open or normally closed circuits
( 10 )
$34.17
$22.21
On Sale
MSD replacement cam sync distributor Hall effect pickups are perfect for refreshing the timing pickup on your engine. These kits include an LED operation light that makes for quick indexing. Also included is the mating connector with terminals and seals for an all-around rebuild. Make sure your ignition is firing correctly when it supposed to be firing with high-quality replacement components like MSD cam sync distributor Hall effect pickups!
Not Yet Reviewed
$117.95
$106.15
On Sale
These MSD Launch Masters connect right to your late model Ford to produce consistent launches and quicker 60 ft. times by setting an rpm limit to stage with. When the MSD Launch Masters are activated, the rpm will be held steady. Once the green light comes on, release the clutch and take off, but be sure to hold on! The Launch Masters' rpm is adjusted with two built-in rotary dials ranging from 1,000-10,900 rpm in 1,000-rpm and 100-rpm increments. A handy LED shows when the launch rev limit is active.
( 11 )
$349.95
$314.95
On Sale
MSD adjustable low-rpm modules allow you to select any rpm between 1,000 and 3,000 by simply turning a knob. They're ideal for vehicles with automatic transmissions that are using the MSD 2-step module to leave the starting line below 3,000 rpm. They plug directly into the rpm module receptacle on the 2-step module selector, and can also be used on MSD's Soft Touch rev controls, rpm-activated switch, and shift light.
( 8 )
$52.69
$47.45
On Sale
These MSD Powersports Launch Masters are universal low-rpm limiters that provide consistent launches and quicker 60 ft. times by setting an rpm limit to stage with. Once the green light comes on, release the clutch and take off, but be sure to hold on! The rpm is adjusted with two built-in rotary dials ranging from 1,800 to 9,900 rpm in 100 rpm increments. MSD Powersports Launch Masters feature a handy LED to show you when your launch rev limit is active.
( 4 )
$322.95
$290.65
On Sale
DIS-4 Plus HO digital ignitions are higher-output versions of the DIS ignition controls from MSD. They're designed for full race engines running high boost pressures from turbos, blowers, or nitrous. Their increased output will light up fuel mixtures even under these extreme cylinder pressures. Your late model distributorless ignition system will never be the same! The capacitive discharge ignitions feature multi-channel capability, complemented with multiple sparks, two rev limiters, and a timing control. These DIS ignitions are engineered with the latest in digital science, including power MOSFET technology and efficient IGBT coil drivers. They're managed by a 15 MHz micro-controller for extremely fast compensations and decisions. In the end, this creates incredibly accurate spark delivery, rev limiting, and timing functions. Throttle response and mid-range pull are also improved, due to a series of powerful multiple sparks that last for 20 degrees of crankshaft rotation. There is a two-step rev limiter, which gives you one limit to set for holeshots and another for top-end performance. For engines using nitrous or extremely high cylinder pressures, you can also program a high-speed retard after the engine hits total timing. Both of these features are easy to adjust with the new built-in rotary dials. They also feature an ignition interrupt that will prevent the engine from starting by disabling the output to the coil, a retard feature that retards the timing at the top end to prevent detonation, and an LED monitor that will alert you of a low supply of voltage or faulty input signals. Also, there is now a true step retard that can be activated through your nitrous solenoid wiring! The DIS-4 HO Plus digital ignitions are designed for 6 or 8-cylinder engines with three or four coil packs.
( 1 )
$1,199.95
$1,078.95
On Sale
MSD MC-4 programmable ignition controls for motorcycles combine multiple spark discharge and digital computer accuracy into one compact ignition system, giving you the best of both worlds. You'll be able to program the MC-4s at the track, on the dyno, or wherever, with or without a computer! The supplied Pro-Data plus software gives you just what you have been waiting for--the ability to program ignition timing curves to suit your engine's needs. These MC-4 ignition boxes are for use with single or dual spark plugs per cylinder, and are 1, 2, or 4-cylinder selectable. Features include: * Computer interface for easy programming * 0-25 degree start retard * Mapable run timing curve * Launch ramp delay by time 0-2.5 seconds * 3-step retards by rpm or switch * 0-2.50 second step retard off delay for precise nitrous control * Progressive timing retard by time for progressive NOS * Launch timing curve to prevent tire slippage * Individual cylinder timing when optional cam sync sensor is used * Gear retard--retard a different amount for each gear * Shift kill feature with programmable delays 20-99 milliseconds * Shift kill modes for manual, auto 1, 2, and auto 1, 2, 3 * Optional boost retard curve when used with an external MAP sensor for turbo applications (2-45 psi) * Built-in rpm-activated window switch--turn "on" any device up to 3 amps at any rpm, then back off at a different rpm * Sequential shift light--turn on an optional shift light at a different rpm for each gear * Sequential shifter turns any air shifter into a fully automatic shifter (3 amps max) * Tach output wire for tachometers or data recorders * Monitor mode for easy setup or 3-step switches
Not Yet Reviewed
$1,599.95
$1,438.95
On Sale
MSD ignition coil pack wiring harnesses are designed to connect your ignition coil pack to your aftermarket or OEM ignition. They can be used on both carbureted and fuel injected engines, making them an excellent choice for any application.
( 24 )
$104.95
$94.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
