Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
MSD Tach Signal GMR Pickups
MSD tach signal GMR pickups simply attach, with no splicing or cutting, to a current-carrying wire, and turn that information into a 12 V rpm signal. That signal can then be used to activate a shift light, rpm activation switch, or tachometer.
( 7 )
$114.95
MSD Current Limited Ignition Tachometer Adapters
If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series ignition with its white wire or points terminal, with a current-limiting ignition (non-ballast resistor systems), you will need one of these MSD limited ignition tachometer adapters. They correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off of the tach output terminal of the MSD ignition unit.
( 4 )
$106.95
MSD Distributorless Ignition Tachometer Adapters
MSD distributorless ignition tachometer adapters allow you to install an aftermarket tachometer on vehicles with no distributor and multiple coil packs. These compact tach drivers measure only 1.5"x 3.5"x 2" and are potted with a polyurethane compound for vibration and water protection so it can easily be mounted under the hood. It wires inline on the coils' 12 volt supply wire where it senses the current going through the wire and converts this information into a 12 volt output signal that most aftermarket tachometers use as a trigger signal. MSD distributorless ignition tachometer adapters can be used on 4, 6 or 8-cylinder engines.
( 7 )
$176.95
MSD Distributor Replacement Parts
MSD has the replacement distributor parts that you need. Don't replace a worn or broken part with another substandard piece. MSD is on the leading edge of production and design and they have one of the strongest reputations in the industry. Look to MSD for reliability, consistency, and the quality products that your ride deserves.
( 22 )
$40.02
—
$114.95
MSD Magnetic Pickup Tach Adapters
MSD magnetic pickup tach adapters maintain accurate tachometer readings. If you are using the magnetic pickup input (green and violet wires) to trigger your MSD Ignition, you will need one of these tach adapters. These units will correct the operation of most voltage-triggered tachometers that do not work directly off of the tach output terminal of your MSD unit.
( 75 )
$108.95
MSD Tach Drive Adapters
MSD tach drive adapters are designed to fit MSD distributors using the 3/16 in. tang drive cable. They are made of bronze, and feature a 0.104 inch square drive (Corvette style) drive cable end adapted to the 3/16 in. tang drive used on all tach drive MSD distributors.
( 13 )
$28.57
MSD Non-Current Limited Ignition Tachometer Adapters
If you are triggering an MSD Blaster, 5, 6, SCI, or 7 Series ignition with its white wire or points terminal, with a non-current limiting ignition (originally equipped with a ballast resistor) you will need one of these MSD factory ignition module tachometer adapters. They correct the operation of most voltage-triggered tachometers or fuel injection systems that do not work directly off of the tach output terminal of the MSD ignition unit.
( 17 )
$101.95
MSD Wire Adapters
These MSD wire adapters allow you to install MSD components into your common distributors. Make every installation look professional by eliminating cut or spliced wires.
( 28 )
$40.49
—
$74.29
MSD Programmable Digital-7 to Power Grid Harnesses
MSD Programmable Digital-7 to Power Grid harnesses allow you to use your existing Programmable 7 harness to install a Power Grid system with minimal alterations. These harnesses are direct plug-ins for all existing wires, but will need two new wires run if you desire to use the two new inputs of the Power Grid.
Not Yet Reviewed
$249.95
On Sale
MSD DIS Dual Coil Ignitors
In the past, adding ignition boxes and coils to factory-transistorized ignitions was virtually impossible. All of that has changed now that MSD has developed the DIS dual coil ignitors. The dual channel ignitors allow you to install an MSD DIS-2 or DIS-4 on 4-cylinder engines with either waste spark or coil-per-cylinder ignitions. Both require MSD coils to be installed for a complete package.
Not Yet Reviewed
$134.95
$75.95
MSD Pro-Billet Dual Sync EFI Distributors
MSD Pro-Billet Dual Sync EFI distributors feature high-quality dual Hall effect sensors, a QPQ coated precision billet shutter wheel, and distributor shaft that's guided by a sealed ball bearing. They also include a race-proven distributor gear, and a performance cap and rotor. The distributors are designed for use with Holley EFI systems; they may also fit other systems requiring a Hall effect sensor. Order the model recommended for your vehicle and engine application. (Note: an ignition adapter is required when Pro-Billet Dual Sync EFI distributors are utilized with Sniper EFI.) Features, specs, and parts may include: * CNC-machined billet aluminum housing * Precision-machined shutter wheel designed for improved accuracy at extreme engine rpm * Plug-and-play with Holley EFI * Can be used to trigger popular TBI fuel injection systems * Hall Effect sensor design provides precise timing control and noise immunity * Integrated LEDs allow for easy setup * Shutter wheel is pinned and welded to distributor shaft for superior reliability
( 17 )
$499.95
—
$599.95
MSD 8.5mm Replacement Coil Wires
Simplify your ignition system installation. MSD replacement coil wires are used when attaching an MSD Blaster coil to an their HEI dust cover or distributor. The pre-assembled wires include two 90 degree boots and two dual crimp terminals.
( 97 )
$30.56
On Sale
MSD 6-Hemi Ignition Controllers
These MSD 6-Hemi ignition controllers fire the coils and control the timing on Hemis that are retro-fit with a carburetor or late model factory electronic fuel injection. You program two separate rev limits and have a single-step retard adjustment. The MSD 6-Hemi ignition controllers connect easily, directly to the coils, crankshaft, cam, and MAP sensors for a simple installation. Wiring harnesses for installing on factory EFI engines are sold separately.
Not Yet Reviewed
$849.95
$653.95
MSD Blaster TFI Coils
MSD Blaster TFI coils powers up your Ford ignition system. With windings and construction similar to MSD's Blaster 2 coils, these coils have an increased turns ratio, plus lower primary resistance than your stock coil. MSD Blaster TFI coils will work with stock TFI ignition systems as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your Ford ignition system? Just bolt in one of these MSD Blaster TFI coils.
( 144 )
$80.09
MSD Pro-Billet LT1 Distributors
Finally, all-out performance distributors to replace the OEM GM LT1 Optisparks--MSD's Pro-Billet LT1 distributors. They feature a precision-machined billet aluminum housing that fits in place of the factory piece, a new pickup assembly, a trick timing adjustment mechanism, and a new MSD distributor cap and rotor. The pickup is an advanced optical encoder that has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft, and is stabilized through the use of a large ball bearing assembly. The distributors use an adjustment screw to advance or retard the timing by up to 5 degrees.
( 65 )
$799.95
