Availability
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,199.95
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$849.95
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$482.95
Holly Sniper EFI coil driver modules are designed to be used in place of a capacitive discharge box. These coil drivers are utilized to amplify the energy transferred to your spark plug, promoting complete combustion in the cylinder! Features: * Compact size allows for easy installation without cluttering up your engine bay * Labeled wires take the stress out of your wiring installation * Requires use of a canister-style ignition coil
( 4 )
$164.95
On Sale
Holley ignition coil driver modules are used to drive ignition coil packs. They feature a potted design that allows installation inside the engine compartment. These universal modules include the wiring harnesses and mating pigtails for installation, and are available in 4- and 8-channel quantity options.
( 2 )
$199.95
$90.95
—
$312.95
Holley trans-brake input protection modules allow for an ECU input to be safely connected directly to the 12 V side of the trans-brake solenoid. They are designed to protect the ECU input from damaging fly-back voltage, which occurs when the trans-brake is released. Not using one of them will cause damage to the ECU over time.
( 4 )
$59.25
Holley's Terminator X and Terminator X Max ECUs give you complete control of your engine, self-learning fuel strategies, and the race-winning technology of Holley EFI at a budget-friendly price. When you need to service your system, Holley has the components that will fit and perform as expected. Holley Terminator X/X Max engine control module wiring harnesses allow you to access the inputs and outputs built into the Terminator X or Terminator X Max ECU. These harnesses have all eight pins populated, four inputs and four outputs. Features: * 36 in. flying leads * Pre-terminated at ECU connector * Eight wires * Sealed connector
( 2 )
$39.49
Bolt-on Holley replacement Terminator EFI engine control modules, answer a few basic questions, and let the Terminator EFI take control of your ride! The modules require no laptop--they self-tune instantly to deliver the perfect air/fuel mixture in real time for optimized fuel economy and power.
Not Yet Reviewed
$2,199.95
Holley Performance offers late model dual pump module relay kits for a variety of applications—including many Ford, Dodge, and Chrysler vehicles from 2005 and up. Each kit includes essential parts necessary to wire twin pump modules to a vehicle. The installation starts with two high-quality Hella 40 amp relays, as well as relay sockets with 10 ft. wire lengths, 12 gauge primary wires, 16 gauge secondary signal wires, and heat shrink sealing connectors to complete your install. Also included are two fuse holders and 30 amp fuses, one for each pump.
Not Yet Reviewed
$186.95
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 123 )
$449.95
—
$632.95
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
$302.95
—
$549.95
Holley Single-Channel EGT controllers are designed for use with a K-type thermocouple using a "mini-K" connector. The module's accurate temperature measurement range is 32-2,282 degrees F (0-1250 C), with an accuracy of +/- 5 degrees F. The module is available in two versions: either CAN 1CH EGT, which is a plug-and-play installation for compatibility with Holley EFI products, such as HP and Dominator EFI systems; or Analog module, 1CH EGT with a "flying lead" with three wires exposed for power, ground, and signal for non-Holley EFI installations. Order the EGT controller suited to your application needs. Plug-and-Play, 1CH EGT controller features: * Supplied harness features two CAN connectors (one male, one female) that plug into the Holley main harness (or P/N: 558-412 kit Dominator only) * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts no thermocouple connected or it failed * Note: before mounting, it is recommended you record the CAN ID Serial number from the sticker on bottom side of the unit for use during software setup * Mounting: EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Software setup * Important note: Requires software and firmware Version 5 Build 31 or later Analog module, 1CH EGT controller features: * Wiring: harness is a "flying lead" with three wires exposed for power, ground, and signal (red wire: power 6.5 V-24.0 V; black wire: ground; and tan wire: Analog output) * Outputs a 0-5 V and can be used with systems that have configurable 5 V inputs * LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts thermocouple not connected or it failed * EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws * Analog setup: analog output scaling is accurate between 0.5 and 4.5 V and covers temperature range of a K-type thermocouple
Not Yet Reviewed
$182.65
The undisputed leader in fuel systems for over 100 years, including Holley crankshaft trigger sensors and pigtails. Their Performance products have powered every NASCAR Sprint Cup team and nearly every NHRA Pro-Stock champion for four decades. They're clearly experts in the field of engine parts, These sensors are fitted to detect the degree of crank rotation, so the engine can inject fuel and spark the coils at just the right time. Holley sensors are designed to trigger from a ferrous metal (magnetic steel) target, such as their own 60-2 crank wheels, and they can also be used as cam sensor triggers or for other applications.
( 6 )
$57.49
Introducing the Holley EFI 8-Channel CANBus EGT kits, for Holley EFI! Exhaus/Gas/Temperature data is critical information when your engine tune up is on the ragged edge. Knowing the exhaust temperature of each cylinder can help you identify potential horsepower left on the table, or pin point any weak links in your max effort race engine. You can also use this data to as identify a potential ignition misfire, or stuck injector! The included sensors are designed to work with any engine combination, with an open reinforced tip for the fastest response rate, and improved shielding. The EGT probes come in different lengths ensuring a clean looking installation. The included stainless steel bungs feature a built-in step, making installation as easy as possible! Kit features: * Compatible with HP or Dominator EFI, and Terminator X EFI * Plug-and-Play 8-Channel CAN EGT module, for quick and easy installation * High-quality 1/4 in. stepped stainless steel EGT weld bungs * Robust 1/4 in. EGT probes, designed to withstand the extreme cylinder pressures * 4 ft. CAN extension harness * Analog output wires, to be used with non-Holley EFI installations * Requires V5 build 100 or newer software/firmware
( 1 )
$1,699.95
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$1,999.95
—
$3,849.95
Add GM 6L80/90E transmission control to any existing vehicle utilizing a Terminator X Max ECU. A departure from traditional Holley EFI transmission control, the Terminator X Max ECU allows the ability to use 2007+ GM 6L80E and 6L90E transmissions by communicating via CAN with the internal TCM (Transmission Control Module). The supplied Holley EFI OBDII transmission tuning hand-held is used to adjust shift points, tire size and gear ratio. Terminator X V3 software provides the ability to dial in torque management to optimize the desired shifting characteristics when using a 6L80/90E transmission. The software also enables you to control the secondary shift mode within the transmission TCM and allows use of tap Up/Down shifting. Within Terminator X V3 PC Software: --- Virtual Torque Management Tables --- Virtual TPS Tables to dial in shift characteristics regardless of engine --- DBW and Timing torque reduction tables to create smooth shifts Within the Holley EFI OBDII Transmission Tuning Hand-held: --- Ability to read and clear TCM fault codes --- Ability to raise and lower shift points by MPH or RPM --- Support for Tap Up/Tap Down & Transmission's Secondary Shift Mode If you currently have a Terminator X ECU, upgrading to a Terminator X Max ECU can be easily done by plugging your main harness into the Max ECU and re uploading your existing calibration. Holley Terminator X MAX GM 6L80/90 transmission kit features: * Included TCM hand-held tuner with integrated wizard is required for setup in conjunction with the Terminator X 3.5 in. hand-held. Terminator X V3 software unlocks optional tuning parameters. * Plug-and-play with any engine controlled by a Terminator X Max ECU * Supports: Shift Mode - Tap Up / Tap Down, and torque management * Four loose wires: --- Power (Red): Supplies power to the transmission solenoids. This should be connected directly to the battery, or a constant battery source capable of supplying 5 amps --- Ground (Black): Connect to a good chassis/engine ground source --- Brake Switch (Light Blue/White): Wired to the brake light switch. This must be installed to a +12 V source (as most brake light switches are) --- Park/Neutral Safety (Yellow): Circuit for starter solenoid. When the transmission is in Park or Neutral, this yellow wire will be grounded (-). When the transmission is in gear this circuit will be open.
Not Yet Reviewed
$573.95
Holley EFI digital dash replacement wiring harnesses keep your gauge panel operating at full capacity. The harnesses are available in terminated or unterminated style—and in individual sections and components, so you can replace only what's needed. Maintain peak performance from your Holley digital dash with replacement wiring designed specifically for the modules.
( 1 )
$149.95
—
$158.95
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? This harness is designed to do exactly that! The Holley Sniper adapter harness is a plug-and-play solution to connect your existing Sniper 1 wiring harness to a Sniper 2 throttle body! It can be used with any Sniper 2 system that is not equipped with a power distribution module (PDM). Simply remove your Sniper EFI throttle body from the intake manifold, unplug all of the connectors, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choosing, and enjoy the benefits of Sniper EFI 2. Make the switch to Sniper 2 in minutes! Sniper EFI 2 is a high performance electronic fuel injection system designed for a wide range of engines and horsepower goals. It provides improved engine performance, better fuel efficiency, and easier starting, making it the perfect upgrade for any enthusiast looking to take their ride to the next level. With its easy installation and advanced technology, the Sniper EFI 2 is the ultimate fuel injection system for any conventional V8 engine. Features: * Update your Sniper 1 to Sniper 2 in less than an hour: One-step, plug-and-play upgrade from your existing Sniper EFI install to a Sniper 2 throttle body * Eliminates the need to rewire your existing Sniper EFI installation * The wiring harness included with the Sniper 2 kit will not be used. This adapter is intended to be used with the original Sniper EFI wiring harness and new Sniper 2 EFI throttle body Sniper 2 EFI benefits: * (NEW) Next Generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires)  * (NEW) "Hidden Harness" wiring harnesses exit from the rear of throttle body for a clean appearance  * (NEW) Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V) and 1x tach output  * (NEW) Next Generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection 
( 2 )
$56.09
Holley EFI 8-Channel CAN EGT (Exhaust Gas Temperature) controllers are designed exclusively for use with Holley's 8-Channel EGT monitoring kit to measure both exhaust gas and cylinder head temperature. Knowing the exhaust gas temps of each cylinder in your engine may not only help you find potential horsepower that you've left on the table, but also pinpoint weak links your engine may have—allowing you to perform fuel adjustment at the cylinder level. Features include: * 8-Channel CAN EGT module * Plug-and-play for a quick and easy installation * EGT module main harness (4 ft.) * Compatible with Holley HP and Dominator ECU * Requires EGT probes (sold separately) * Requires V5 Build 100 or newer software/firmware
( 1 )
$876.95
Introducing the Holley EFI Single-Channel EGT kits! They keep you in-the-know about what's going on with your engine. Exhaust gas temperature data is critical information when your engine tune-up seems to be on the ragged edge. Knowing the exhaust temp can help you identify potential horsepower left on the table, or pinpoint any weak links in your max effort race engine. Holley offers these EFI Single-Channel EGT kits for non-Holley applications, as well as compatibility with HP Tuners, Dominator EFI, and Terminator X. Order the Holley EFI Single-Channel EGT kit to meet your application needs. Kit features, specs, and parts may include: * Single-Channel CANbus EGT controller module for quick and easy installation with Holley EFI—or Single-Channel Analog EGT controller with unterminated output wires for universal installations (please specify when placing order) * High-quality 1/4 in. stainless steel EGT weld bung * Robust 1/4 in. probe designed to withstand extreme cylinder pressures * Sensor (included) is designed to work with any engine combination, with an open reinforced tip for the fastest response rate and improved shielding
Not Yet Reviewed
$312.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 36 )
$549.95
$274.95
—
$699.95
Specifically designed for use with the Holley 8.2 in. SBF Hi-Ram intake manifold, these EFI low-profile SBF Dual Sync distributors share all the same great features of other Holley EFI Dual Sync distributors. The design includes dual Hall effect sensors for the crankshaft and camshaft signals. They can be used as just a crank speed input, as well as providing a cam sync signal for a sequential fueling operation—or to provide the needed crank and cam signals for coil-on-plug applications. The precision-machined shutter wheel design ensures accurate timing, even at very high engine speeds. Holley Sniper EFI low-profile SBF Dual Sync distributors also provide compatibility with other EFI systems that support Hall effect crank and cam sensors. Product features include: * Plug-and-play with Holley EFI * CNC-machined billet aluminum housing * Integrated LEDs allow for easy setup * Hardened steel distributor gear
( 1 )
$549.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
