Availability
On Sale
Holley wiring harness connectors provide one-stop shopping for your wiring needs. Along with their extensive line of wiring components, Holley offers a tremendous assortment of genuine OEM connectors to hook up your wiring project properly, securely, and completely. They're available individually and in packs of 10—with most including pins, seals, and TPA. Finish wiring your Holley-powered machine with their quality wiring harness connectors.
( 9 )
$12.22
—
$49.95
Holley Terminator X MAX engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each X MAX ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Order your Holley EFI Terminator X MAX Service ECU today. Features: * Compatible with all Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (fuel and oil pressure inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories, such as: -- Fans, boost control, nitrous control, IAC kit, and more * GM LS and LT, Ford Coyote, and Mopar Gen V drive-by wire throttle body control * GM 4L60 and 4L80, and Ford 4R70W transmission control * Boost Control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous Control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
( 7 )
$1,199.95
Holley Terminator X engine control modules are standalone units intended for use as service components for your Terminator X EFI installation. Each ECU features real-time fuel learn, high-impedance injector drivers, an integrated 1 Bar MAP sensor, and four programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. Order your Holley EFI Terminator X Service ECU today. Features: * Compatible with Terminator X harnesses * OEM (Original Equipment Manufacturer) injectors supported with part numbers provided in the handheld wizard or software * Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * Eight built-in multi-color diagnostic LEDs allow you to quickly identify a variety of potential system issues, such as: -- A failed TPS (Throttle Position Sensor) Autoset -- Faulty crank or cam sensors -- Potential oxygen sensor issues * Built-in 1 Bar MAP (Manifold Air Pressure) sensor -- On boosted applications, you can disable the internal MAP sensor and utilize an external MAP sensor * Four inputs—12 V, Ground, 5 V, and Frequency for things, such as: -- Additional pressure sensors -- Activation triggers for nitrous activation -- A trans-brake (Fuel and Oil Pressure Inputs are pre-terminated) * Four outputs--Ground, PWM, and accessories such as: -- Fans, boost control, nitrous control, IAC kit, and more * Boost control: -- Boost vs. Time/Gear/RPM/Speed, and boost safeties * Nitrous control: -- Single channel of wet or dry -- Progressive or non-progressive -- Rich/lean safeties -- Target closed loop AFR * Advanced tables: -- Four 1D tables -- One 1D per gear table -- Four 2D tables -- One 2D per gear table * Free EFI tuning software for complete control of your Terminator X powerplant
Not Yet Reviewed
$849.95
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
On Sale
Specifically designed for use with the Holley 8.2 in. SBF Hi-Ram intake manifold, these EFI low-profile SBF Dual Sync distributors share all the same great features of other Holley EFI Dual Sync distributors. The design includes dual Hall effect sensors for the crankshaft and camshaft signals. They can be used as just a crank speed input, as well as providing a cam sync signal for a sequential fueling operation—or to provide the needed crank and cam signals for coil-on-plug applications. The precision-machined shutter wheel design ensures accurate timing, even at very high engine speeds. Holley Sniper EFI low-profile SBF Dual Sync distributors also provide compatibility with other EFI systems that support Hall effect crank and cam sensors. Product features include: * Plug-and-play with Holley EFI * CNC-machined billet aluminum housing * Integrated LEDs allow for easy setup * Hardened steel distributor gear
( 1 )
$549.95
$493.95
On Sale
Are you in need of quality replacement components for the Sniper 92mm/102mm throttle body on your Sniper EFI fabricated manifold for GM LS1/LS2/LS3/LS6/LS7 model? Check out what Holley Sniper has to offer, including these throttle position sensors. These quality replacements are sure to do the trick!
( 7 )
$44.66
$40.19
On Sale
The pressure inside the intake manifold is an extremely important input to the engine control unit. Holley Sniper MAP sensors respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from 1-5 volts. These replacement sensors will handle applications up to 25 lbs. of boost. Additional notes: * Utilizes stock attaching points * Sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine—providing necessary data to control fuel enrichment
( 3 )
$35.65
$32.09
Want to make the switch from the original Sniper EFI to Sniper 2 and don't want to rewire your system? This harness is designed to do exactly that! The Holley Sniper adapter harness is a plug-and-play solution to connect your existing Sniper 1 wiring harness to a Sniper 2 throttle body! It can be used with any Sniper 2 system that is not equipped with a power distribution module (PDM). Simply remove your Sniper EFI throttle body from the intake manifold, unplug all of the connectors, and plug the Sniper EFI 2 adapter harness into your existing main harness. Cycle your ignition key, run a fresh wizard on the display of your choosing, and enjoy the benefits of Sniper EFI 2. Make the switch to Sniper 2 in minutes! Sniper EFI 2 is a high performance electronic fuel injection system designed for a wide range of engines and horsepower goals. It provides improved engine performance, better fuel efficiency, and easier starting, making it the perfect upgrade for any enthusiast looking to take their ride to the next level. With its easy installation and advanced technology, the Sniper EFI 2 is the ultimate fuel injection system for any conventional V8 engine. Features: * Update your Sniper 1 to Sniper 2 in less than an hour: One-step, plug-and-play upgrade from your existing Sniper EFI install to a Sniper 2 throttle body * Eliminates the need to rewire your existing Sniper EFI installation * The wiring harness included with the Sniper 2 kit will not be used. This adapter is intended to be used with the original Sniper EFI wiring harness and new Sniper 2 EFI throttle body Sniper 2 EFI benefits: * (NEW) Next Generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires)  * (NEW) "Hidden Harness" wiring harnesses exit from the rear of throttle body for a clean appearance  * (NEW) Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V) and 1x tach output  * (NEW) Next Generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection 
( 3 )
$56.09
On Sale
Holley EFI Gen III Hemi VVT and SRV harnesses offer control. 2009+ Gen III Hemi engines rolled off the showroom floor with Variable Valve Timing (VVT). Now, both Holley Terminator X and Terminator X Max ECUs will allow you to control and tune the VVT with the use of the plug-and-play VVT harness. But the fun does not stop there! If you are using a stock intake manifold that came from the factory with the Short Runner Valve (SRV), Holley also has a plug-and-play sub harness that will allow you to utilize the SRV actuator and capitalize on its low rpm torque benefits. Features: * Plug-and-play with the factory Gen III HEMI VVT sub-harness, and any Holley EFI HEMI main harness connecting to the power tap and input/output connectors * Provides control of VVT solenoid under the intake manifold * SRV (Short runner valve) connector pre-wired into the sub harness allowing you to simply plug into the factory SRV actuator in the intake manifold
Not Yet Reviewed
$163.95
$147.55
2009+ Gen III Hemi engines rolled off the showroom floor with Variable Valve Timing (VVT). Both the Terminator X and Terminator X Max ECUs will allow you to control and tune the VVT with the use of Holley EFI Gen III Hemi VVT harnesses. These plug-and-play harnesses (to the factory sub-harness) provide control of VVT solenoid under the intake manifold.
Not Yet Reviewed
$125.95
The factory alternator on the 2020 and up Ford 7.3 L Godzilla engine is a bulky single or dual alternator design that is tough to package in an engine swap. The Holley Ford 7.3L Godzilla alternator kits provide a more compact solution for extra clearance and works with the factory timing cover, water pump, damper/crank pulley, and intake manifold. They also will work with after-market damper/crank pulley. The bracket and alternator are compact and lightweight, and the Holley alternator is easy to wire and does not require the factory ECU to function like the OE alternator. Holley includes the plug/pigtail, pulleys, and belt in a complete kit. Please note the included belt is for alternator-only applications, but the instructions specify the belt for other configurations. The bracket allows for any accessory configuration, and it works with or without the air conditioning compressor and with or without a power steering pump. Features and details: * Alternator kit and mounting bracket for Ford Godzilla 7.3-liter engine swaps * Great solution with everything needed to add an alternator to the Ford 7.3-liter crate engine * Eliminates bulky dual alternator system—factory setup on some heavy-duty trucks * Works with the factory timing cover, water pump, damper/crank pulley, and intake manifold—also works with after-market damper/crank pulley * Compact design with alternator pulled in tight to the engine for extra clearance under the hood * The mounting bracket is compatible with Holley alternator models: PN: 197-300, 197-301, 197-302, and 197-303 * Easy wiring of alternator and does not require factory ECU to excite alternator—wiring pigtail included * Choose from a complete kit with 105-amp Holley alternator (PN: 20-380), or bracket kit (PN: 97-409) * Natural as cast finish on the mounting bracket and alternator * Works with or without an air conditioning compressor * Works with or without a power steering pump * For alternator-only race setup, Holley bracket PN: 97-409 should be used with Holley premium alternator (PN: 197-302 or 197-303)—ideal for high rpm applications (alternator designed and tested for up to 30 percent higher rpm) * Ideal for use on Godzilla crate engines and engine swaps
Not Yet Reviewed
$449.95
Holley fuel injection connector kits are your EFI multi-port connectors. Complete connector and pin kits are available for Holley MPFI and Stealth Ram Power Pack kits. Includes connector and pins for: * Manifold Absolute Pressure (MAP) sensor * Idle Air Control (IAC) sensor * Throttle Position Sensor (TPS) * Coolant Temperature Sensor (CTS) * Air Intake Temperature (AIT) sensor
Not Yet Reviewed
$56.25
The Hilborn EFI-R manifold systems combine electronic fuel injection with the racing-born performance and aggressive looks of individual runner engine induction. Holley Hilborn Universal Terminator X MPFI systems provide cutting edge EFI technology, and are intended for the most serious naturally aspirated performance enthusiast. Each kit includes a CAN-USB tuning dongle, so you can tune your EFI system specifically for your engine via Holley's free Terminator X EFI software. Also included is a universal main harness, EV1 injector harness, Bosch LSU 4.9 wideband, input/output harness, and main power harness. These kits are for use with Hilborn EFI-R intake manifolds: * 300-800 for Big Block Chevrolet applications requiring 2 7/16 in. throttle bores * 300-801 for Big Block Chevrolet applications requiring 2 5/8 in. throttle bores * 300-807 for Big Block Chevrolet applications requiring 3 in. throttle bores
Not Yet Reviewed
$1,249.95
On Sale
Precise timing control—Holley EFI dual-sync distributors are built with two Hall effect sensors for crankshaft and camshaft signals. The distributors can be used as just a crankshaft speed input or provide a camshaft sync signal for sequential fueling operation. They're also useful for crank and cam signals when running coil-on-plug applications. Dozens of models are available; order the one recommended for your vehicle/engine application. Some features of Holley EFI dual-sync distributors include: * CNC-machined billet aluminum housings with integrated LEDs for easy setup * Hardened steel distributor gear * Precision-machined shutter wheels that ensure accurate timing—even at very high RPM * Designed to be plug-and-play with Holley systems, but may be used with other EFI systems that support Hall effect crankshaft and camshaft sensors * Housings are available in a variety of finishes
( 37 )
$699.95
$628.95
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$499.95
$448.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
