Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Haltech Nexus Rebel LS Throttle Adapter Harnesses
Haltech Nexus Rebel LS throttle adapter harnesses are offered in several styles to join the throttle connector on the Nexus Rebel LS main terminated harness to a 6- or 8-pin LS DBW throttle, or to a cable-operated GM LS throttle body with a TPS and an IAC valve. Choose the proper cable for your setup.
Not Yet Reviewed
$28.00
Haltech Nexus Rebel LS Pedal Adapter Harnesses
Haltech Nexus Rebel LS pedal adapter harnesses are designed to connect the Accelerator Pedal Position (APP) connector on the Nexus Rebel LS main terminated harness to a Corvette or Bosch pedal for Drive By Wire (DBW) throttle control. Additionally, the adapter includes a wire for connecting the Rebel LS VCU to a brake pedal switch as part of the DBW control safety system. Choose the kit for your pedal.
Not Yet Reviewed
$49.00
Haltech Nexus Rebel LS Knock Sensor Adapter Harnesses
Haltech Nexus Rebel LS knock sensor adapter harnesses convert the two Gen IV knock sensor connectors on the Rebel LS main terminated harness into a single plug, used in Gen III LS engines.
Not Yet Reviewed
$24.00
Haltech Nexus Rebel LS Oil Pressure Sensor Adapter Harnesses
Haltech Nexus Rebel LS oil pressure sensor adapter harnesses convert the oil pressure sensor connector on the Rebel LS main terminated harness from an early style/Gen III to a Gen IV connector.
Not Yet Reviewed
$24.00
Haltech Elite CAN Adapter Harnesses
Haltech offers a wide range of wiring components for automotive performance applications, including this Elite CAN adapter harness. Haltech Elite CAN cables are available in many lengths to connect DTM-4 to DTM-4, 8-pin Tyco, or OBDII, or a DTM4 receptacle to 16-pin Tyco. Choose the proper connectors and length needed.
Not Yet Reviewed
$47.00
Haltech Nexus Rebel LS MAP Sensor Adapter Harnesses
Haltech Nexus Rebel LS MAP sensor adapter harnesses convert the MAP sensor connector on the Rebel LS main terminated harness from an early- style/Gen III to a modern Gen IV connector.
( 1 )
$24.00
Haltech Wideband Adapter Harnesses
Haltech wideband adapter harnesses are used to integrate wideband sensors to your Nexus Series harnesses and ECUs. The adapter harnesses are terminated with a DTM6 plug to either a Bosch LSU 4.9 or NTK connector. The flying lead adapter harness is terminated with a DTM6 receptacle to AMP Superseal pins and should be used in conjunction with the Haltech LSU 4.9 or NTK adapter harness and hardware packs. Select the correct harness(es) to suit your wideband sensor and Nexus device.
Not Yet Reviewed
$31.00
Haltech CAN Adapter Harnesses
Haltech offers a wide range of wiring components for automotive performance applications, including this CAN adapter harness. It's used to adapt a Platinum Series ECU to an Elite DTM-4 CAN system. * CAN Adapter cable DTM-4 female receptacle/socket to 8 pin black Tyco
Not Yet Reviewed
$47.00
Haltech Wideband Hardware Packs
Haltech wideband hardware packs include the oxygen sensor, adapter harness, and weld-in bung to plug-and-play with a Nexus Series harness. Select the pack for LSU 4.9 or NTK.
Not Yet Reviewed
$180.00
Haltech CAN 15 Button Keypads
With 15 soft touch, ergonomically designed buttons, the Haltech CAN keypad is easy to configure and use. It's a plug-and-play control solution for your Haltech system. The keypad is suitable for NEXUS and Elite devices only; not compatible with Platinum or earlier ECUs. Includes: 15-Button Keypad (3x5), Adaptor Harness DT-4 to DTM-4, DTM to DTM Cable -1200mm, Label Set, Mounting Nut and Washer Kit
Not Yet Reviewed
$435.00
Haltech Elite 1500 ECU
Haltech's Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. Recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional product details: * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range, or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger-type support * Up to 45 channels of Input & Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Outputs: Up to 4 injector and 4 ignition * Suits: Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. * Includes: Elite 1500 ECU with DBW and Race Functions, USB programming cable and software on a USB drive * Notes: Available with universal wiring, terminated engine harnesses, or model-specific plug-n-play adapter kits
Not Yet Reviewed
$1,599.00
Haltech Elite 2000/2500 GM Gen IV LS/LSX DBW Ready Terminated Harness
Haltech's Elite 2000/2500 GM Gen IV LS/LSX DBW Ready terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labeled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a Haltech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * Injector Connector harness options: Bosch EV1 or Bosch EV6 * Quick start guide will walk you through installation * Guide is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions * Suits: Common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. * Includes: Engine harness with fuse block and firewall grommet. * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
Not Yet Reviewed
$670.00
Haltech TI Pressure Sensors
Haltech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. Their "TI" pressure sensors for fuel/oil/wastegate are designed for remote mounting (not mounted directly into the fuel rail or engine block)—and connected via a flexible hose. They are individually electronically tested before packaging, available in different psi ratings, and include matching plug and pins, along with a -4 AN adapter. Select the Haltech "TI" pressor sensors with the psi needed.
( 1 )
$205.00
Haltech Elite 2000/2500 GM Gen IV LS/LSX Non-DBW Terminated Harness
Haltech's Elite 2000/2500 GM Gen IV LS/LSX Non-DBW terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a Haltech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * Injector Connector harness options: Bosch EV1 or Bosch EV6 * Quick start guide will walk you through installation of the harness * Guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions * Suits: Common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. Manual transmission only. * Includes: Engine harness with fuse block and firewall grommet * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040091) LS2 Ignition coils and harnesses are NOT included.
Not Yet Reviewed
$670.00
Haltech Elite 2000/2500 GM Gen III LS1/LS6 DBW Retrofit ReadyTerrminated Harness
Haltech's Elite 2000/2500 GM Gen III LS1/LS6 DBW Retrofit Ready terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a Haltech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * The quick start guide will walk you through installation * The guide is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. * Suits: Retrofit of a GEN IV LS2/3 DBW throttle body. Common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. WBC1/2 CAN O2 Wideband Controller ready (Controller and sensor(s) not included) Manual transmission only. * Includes: Engine harness with fuse block and firewall grommet * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040091) Ignition coils and harnesses are NOT included, Please order 8 x HT-020102 and/or HT-045657 if required.
Not Yet Reviewed
$670.00
Haltech Elite 2000/2500 GM Gen III LS1/LS6 Non-DBW Terminated Harness
Haltech's Elite 2000/2500 GM Gen III LS1/LS6 Non-DBW terminated harness is the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires and this plug-and-play product allows you to be up and running in just a few hours. When installed in conjunction with a Haltech Elite ECU, this harness opens the door to virtually limitless performance modification and tuning of your vehicle. * The quick start guide will walk you through installation * The guide is accompanied by the full ECU manual and software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * Fully programmable systems allow you to extract all the performance from your engine—by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. * Suits: Factory EV1 injector connectors and common U.S.-style Delco/Bosch GM alternator connector. Pre-wired to connect directly to OEM 7 Pin Coil Harness Connector. WBC1/2 CAN O2 wideband controller ready (controller and sensors not included) * Includes: Engine harness with fuse block and firewall grommet * Notes: Please confirm your alternator connector (See the product quick start guide) and order an alternator adapter if required. (HT-040090 or HT-040090) Ignition coils and harnesses are NOT included, Please order 8 x HT-020102 and/or HT-045657 if required.
Not Yet Reviewed
$670.00
