Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
FuelTech Pressure Sensors
FuelTech pressure sensors are great for logging oil pressure, fuel pressure, boost pressure, or even exhaust back pressure on a turbo motor. The sensors will require an open ADC port on your ECU, or an auxiliary circuit to allow extra data to display on the computer screen and on your datalog files. These pressure sensors are available in a variety of PSI ranges.
Not Yet Reviewed
$129.00
FuelTech Remote Mount Pressure Sensor Blocks
FuelTech's remote pressure sensor mounting blocks are the perfect solution to mount your pressure sensors in one common place. Each port is individually connected from top-to-bottom, allowing you to run up to four separate pressure sensors on a small lightweight billet mounting block away from vibration and for easier access. (Sensors are sold separately.)
( 1 )
$89.00
FuelTech Plug Kits
FuelTech provides the plug kits needed to finish up your wiring project. Whether you want to measure your vehicle's throttle position, intake air temperature, water temperature, or plug into some other type of sensor, these sets deliver top-notch quality in a variety of configurations for easy installation. Developing and designing high-performance products since 2003, FuelTech offers plug kits engineered to fulfill the needs of your application.
Not Yet Reviewed
$8.00
—
$9.00
FuelTech IGN1A Inductive Smart Coils
FuelTech's IGN1A inductive Smart Coils are the perfect ignition coil for your high performance application, with up to 175mj of energy and a long spark discharge time of 3.2ms. These coils provide great idle characteristics, as well as the power to needed run your engine with high cylinder pressures from boost, nitrous injection, or even high strung naturally aspirated applications. Max dwell can be up to 9ms for short periods of time to extract the maximum output from the coil when under high boost or load. Under normal driving conditions 5ms of dwell is recommended. At 9ms of dwell time, these coils will consume 20 amps each while sending 150mA of current to the spark plug! At 5ms they will consume 8 amps each—so make sure you account for that when wiring them up on your vehicle. Installing IGN1A coils with one of FuelTech's PRO550 or PRO600 harnesses is a breeze with their plug-and-play V8 smart coil harness, giving you a complete wiring solution for both your engine management and high performance ignition system.
( 2 )
$89.00
FuelTech NanoPRO Oxygen Sensor Conditioners
FuelTech NanoPRO oxygen sensor conditioners have a new design, and with it they are able to condition and read five different models of wide band lambda O2 sensors: * BOSCH LSU 4.2 * BOSCH LSU 4.9 * BOSCH LSU 5.2 * NTK lab grade sensor * NTK wideband o2 sensor Way more than an O2 conditioner, NanoPRO has a 12-way connector with three wire groups. One of them has the connector for the O2 sensor, the second makes the CAN communication with PowerFT ECUs and the third is responsible for power and analog output. These 3-in-1 tools feature an extended wideband reading scale with advanced new hardware for fast and precise readings. Additional features and benefits: * Waterproof (IP67 certified with product harness connected) * 2 in. color display with resistive touch screen * Compatible with 5 different models of O2 sensors * Different fuels AFR or lambda display unit options-- reading range can reach values slightly lower or higher than 0.21 Lambda, depending on the manufacturing characteristics of the sensor: -- Lambda (0.21 - 9.99) -- AFR Methanol (1.35 - 64.6) -- AFR Gasoline (3.09 - 146.6) -- AFR Ethanol (1.89 – 89.9) * CAN communication with PowerFT ECUs: -- Second display gauge function that allows display valuable information like Oil Pressure, Fuel Pressure, Boost, RPM, Engine Temperature and much more coming from the FTCAN 2.0, with the possibility of configuring up to five custom screens -- Switch Panel function, touch screen buttons or switches via CAN bus to the PowerFT ECU * Three configurable O2 sensor heating modes: Normal, Fast, and Current Limited, as well as activated by engine rpm or temperature * Advanced heater diagnostics in the PowerFT ECU datalogger * 0 to 5 V analog output for connection with any data acquisition or programmable injection system. * Maximum power supply voltage: 20 V
Not Yet Reviewed
$349.00
FuelTech Relay Connectors
FuelTech offers automotive relay holders for 4- or 5-pin mini ISO relays (regular 40 amp relays). They're the perfect relay connectors to use with the 40 amp relay with built-in fuse. Their crimp terminals are rated for high current and are the special spring pressure contact terminal to guarantee great contact even under vibration environment. Kit includes: * Housing with mounting flap to be mounted individually or can be interlocked * 3 of the high current crimp terminals to be used on pin 30, 87 and 87a compatible with wire 3.3mm2 to 5.3mm2 (12AWG to 10AWG) * 2 of the low current crimp terminals to be used on pins 85 and 86 compatible with wire 0.5mm2 to 0.8mm2 (20AWG to 18AWG)
Not Yet Reviewed
$25.00
FuelTech Backpressure Dampening Canisters
FuelTech backpressure dampening canisters will make a great addition to your turbocharged engine. Measuring the exhaust backpressure is vital data required to best determine the true efficiency of your combination. By separating the backpressure sensor from the direct connection to the exhaust manifold using FuelTech's backpressure canister, the sensor will be protected from heat, moisture--and has pressure spike filtering naturally built into the canister. This filtering assists in protecting the sensor and allows you to see true indication of pressure in the exhaust manifold. These billet aluminum backpressure canisters measure 2 3/4 in. to 2 1/2 in. with mounting holes 2 in. center-to-center. The sensor port and hardline inlet are tapped to 1/8 in. NPT. Add one of these backpressure canisters to your project today!
Not Yet Reviewed
$199.00
FuelTech FT Input Expanders
FuelTech's FT input expanders are input expander modules compatible with the FuelTech PowerFT line (FT500/FT500LITE/FT450/FT550 and the FT550LITE/FT600). These FT input expanders offer 20 inputs for sensor readings—such as pressure, flow, temperatures, position, and activation of functions using keys or buttons, and four differential inputs rpm reading and speed. The expander modules fully integrate with FTManager software and communication via the CAN network, with a simple and fast configuration through an interface already known to users familiar with FuelTech products.
Not Yet Reviewed
$659.00
FuelTech FT550 6-Cylinder Universal Expansion B Harnesses
FuelTech's FT550 6-cylinder universal B harnesses make a FT550 ECU installation faster and easier, and they must be used along with the FT450/FT550 6-cylinder Universal A harness. The expansion B harness will fit 6-cylinder projects with 12 injectors, controlled by an FT550 ECU. The harness also changes the setup to sequential ignition and sequential primary injectors, using the Fuel/Ignition Mode connector. The insulation and connectors are moisture-, heat-, and oil-resistant. Specifications: * 6 EV1 injector connectors (12 when using FT550 and expansion B harness) * FuelTech Peak and Hold external driver ready (both A and B harnesses) * FuelTech WB-O2 NANO ready (one) * Intake air temperature sensor ready (GM-style connector) * Engine temperature (coolant) sensor ready * Fuel and oil pressure sensor ready * Extra output connector for custom use * Crank and cam (Hall and VR) loose wires
Not Yet Reviewed
$329.00
FuelTech Pan Vacuum Sensors
FuelTech Pan Vacuum sensors are designed to monitor crankcase vacuum inside an engine to ensure piston rings are sealing properly in the cylinders. A correctly sealed engine is vital in achieving maximum performance. One of the best ways to ensure you're keeping that ring seal at its optimum best is with the use of a FuelTech Pan Vacuum sensor. They're made from durable materials with a 1/8 in. NPT thread size to provide accuracy.
Not Yet Reviewed
$179.00
