Summit Racing SpeedCard - learn how to get 10% back up to $100

Summit Racing SpeedCard - learn how to get 10% back up to $100

Haul in the Savings - Shop the Truck Savings Event Today!

22 Results Found For "Module"

Part Groups

Results 1 - 22 of 22

FAST Replacement Dual-Sync Ignition Modules

Fuel Air Spark Technolory (FAST) can solve your "heart" problems! The ignition module is the heart of an automobile's ignition system, and if your dual-sync modules are overheating they'll soon completely cease to function. Loose or corroded electrical connections can also be a common cause of problems. These FAST replacement ignition modules are a simple drop-in solution to get your dual-sync distributors performing at peak efficiency.

5.0 out of 5 stars ( 2 )

$140.95

FAST XIM Ignition Modules

FAST XIM ignition modules are an easy and effective way to install your FAST XFI fuel injection system on your distributor-less, ignition-type EFI engine. These modules are available alone or in an ignition kit with a wiring harness included. The installation is a simple plug and play with factory-type connectors to plug into the factory sensors. You're ready for XFI fast with FAST XIM ignition modules.

Not Yet Reviewed

$824.95

$1,115.95

FAST EZ-Run Distributor Modules

FAST EZ-Run distributor modules are accurate, dependable, and maintenance-free. These replacement ignition modules have a simple 3-wire connection, saving time and space by eliminating the need for an external ignition box. FAST EZ-Run distributor modules will provide the same performance and fit as the originals they are replacing.

Not Yet Reviewed

$124.95

FAST XR3000 Ignition Modules

FAST XR3000 ignition modules are high-output inductive ignitions that produce higher voltage and current that will fire your engine. These replacement modules for both domestic and imports, are fully sealed for protection from vibration and moisture.

Not Yet Reviewed

$123.95

FAST XFI EGT Modules

FAST XFI EGT (Exhaust Gas Temperature) modules allow XFI owners to monitor up to eight EGT sensors without requiring the use of the eight square auxiliary XFI inputs. The modules utilize a small, thin cable to communicate through a high-speed CAN (Controller Area Network) connection protocol at 500 kbps. They measure and transmit data from k-type thermocouples with a range of 32 to 1,670 degrees F (0 to 910 degrees C). Once transmitted, the data is available for viewing and logging through either the XFI or the FAST dash logger. FAST XFI EGT (Exhaust Gas Temperature) modules are available individually with wiring harness and manual, or in kits that also include fittings and thermocouplers.

Not Yet Reviewed

$649.95

FAST XFI 3-Axis Accelerometer Modules

Perfect your driving style with these FAST XFI 3-Axis accelerometer modules. These modules give you the ability to read and record positive, negative, and lateral g-forces in real time. This information can be very useful when setting up your suspension or perfecting your launches or cornering at the track. Get the most out of your street rod, hot rod, or track car with these FAST XFI 3-Axis accelerometer modules.

Not Yet Reviewed

$274.95

FAST XIM Ignition Module Wiring Harnesses

FAST offers XIM Ignition Module wiring harnesses for a variety of applications, including many Chevy small block Gen III/IV (LS-based) engines from 1997 and up. The XIM Ignition Controller allows you to easily control all aspects of the ignition system when used with a FAST EZ-EFI 2.0, XFI 2.0, or XFI Sportsman. A number of different wiring kits are available for late model GM LS platforms, 5.7 and 6.1 Chrysler Hemis, and Ford's mod motor or the Coyote series. This versatile ignition controller is also capable of giving you coil-per-cylinder operation on any engine using a standard crank trigger and a simple pulse per revolution cam sensor. Connect your XIM ignition controller with one of these wiring harnesses from FAST!

Not Yet Reviewed

$334.95

FAST HI-6R CD Ignitions

Designed for engines with up to 14.5:1 compression ratios, nitrous, superchargers, or turbos, FAST's HI-6R ignitions keep your ride performing all the way down the track. These fully digital, multi-spark, CD ignitions deliver higher spark-gap current than comparable digital CD ignitions. Designed for street and racing use, they come with FAST's "Plug-n-Go" universal harness to cover most installations, with optional harnesses available separately. Their built-in rev limiter automatically drops cylinders in firing order to prevent fuel loading, and is adjustable by increments of 100 from 600-9,900 rpm, without the need for chips. Other built-in features include a tach accuracy check, a system problems check for easy problem diagnosis, and crossfire protection for supercharged and turbo applications. The optional 0-20 degree adjustable timing retard and MAP sensor make a great combination for nitrous and turbo applications. They feature fully potted construction with soft urethane for heat, dirt, and moisture protection, and an anodized heat-sink shell for reliability. FAST designed them to be points, mag, or module-triggered for 4, 6, and 8-cylinder engines with distributors.

3.67 out of 5 stars ( 3 )

$320.95

FAST XR3000 Points-to-Electronic Ignition Conversion Kits

FAST XR3000 ignitions convert your points to an electronic ignition. They feature an all-new status LED light for easy diagnostics and 150 percent greater spark gap energy over stock points ignitions. They use a high-output coil without a ballast resistor, an optical trigger for precise ignition timing accuracy, and are fully sealed for protection against dirt, moisture, and vibration.

5.0 out of 5 stars ( 1 )

$174.95

FAST XFI Ignition Adapter Harnesses and Connector Kits

These XFI ignition adapter harnesses and connector kits are used with the XFI units that have the latest in flash microprocessor technology to deliver a significant increase in processing speed. They are able to process, analyze, and adjust four times faster than previous EFI systems. These kits enable you to keep your software current without ever removing the XFI from your vehicle.

5.0 out of 5 stars ( 1 )

$92.95

FAST Optical Trigger Installation Kits

FAST optical trigger installation kits are required in order to hook up the optical trigger conversion kits. They include the necessary shutters and brackets for installation.

5.0 out of 5 stars ( 1 )

$46.95

FAST Wireless Air/Fuel Meter Kits

FAST has revolutionized the tuning industry with the most advanced, app-based, wireless air/fuel meters, in both dual and single sensor options. These kits use an underhood-mounted Bluetooth module, connected to Bosch LSU 4.9 oxygen sensors in one or both of your engine's exhaust outlets—giving you the full story on the state of your engine's tune. With the dual sensor unit, you can read both wideband oxygen sensors individually, or average them together for super accurate readings of the engine's true air/fuel ratio. Easy to use with any iOS or Android device, the FAST wireless air/fuel meter app includes a simple, built-in data logger that records up to two minutes of air/fuel and RPM data. Fuel calibrations are preloaded for measuring gasoline, all popular ethanol blends, methanol, diesel, and more. Advanced features include 0-5 V output for external data loggers and digital gauges. Additionally, a selectable module output is provided that can be used as: an RPM-activated window switch; a lean air/fuel ratio safety cut-off; or an innovative anti-theft feature. This would allow you to manually activate/deactivate a vehicle immobilizing relay—a simple way to protect your vehicle from theft! Additional details: * Monitor air/fuel ratio directly from any iOS or Android smartphone * Supports all popular fuel types * Clean install, no extensive wiring or permanent gauges needed * Includes oxygen sensor bungs and 39.37 in. of sensor wiring With features unlike anything else on the market, it's clear that FAST wireless air/fuel meter kits are the best choice for the serious engine tuner.

4.75 out of 5 stars ( 4 )

$734.95

FAST XDi Street HEI Distributors

FAST XDi Street HEI distributors include the industry-first gear technology with an upgraded module and coil that ensure clean ignition firing up to 8,500+ rpm. Ideal for SB and BB Chevy engines, each of the XDi distributors feature a plasma nitrided gear compatible with all popular camshaft materials, including cast iron, austempered iron, 5160 steel, and even 8620 steel. The special plasma nitride process used on the gears not only increases the gear's surface hardness, but also the "slickness" of the gear teeth reducing friction and increasing cam/distributor gear life, as well as making them superior to common melonized gears. XDi Street HEI distributors also feature powerful 6-amp ignition modules that drive custom-wound performance coils up to 50,000 V, providing the hot spark needed for maximum horsepower. While ready to run out of the box, for those that enjoy tuning the mechanical and vacuum advance mechanisms for better throttle response and fuel economy, FAST XDi Street HEI distributors include springs, advanced limit plate, and instructions needed to adjust the distributor for your particular engine/vehicle combination.

4.38 out of 5 stars ( 21 )

$191.95

FAST XDi EZ-RUN Distributors

FAST XDi EZ-RUN distributors are convenient packages that save time and space. These units do not require an ignition box to fire the coil, and their standard-size caps offer more firewall and manifold clearance than HEI-style distributors. XDi EZ-RUN billet distributors feature mechanical and vacuum advance for easy setup and use. They also feature a built-in electronic module that can directly fire an ignition coil, while delivering accurate, dependable, and maintenance-free operation. Ideal for both carbureted and EFI conversion engines, EZ-RUNs are a perfect choice for daily drivers, musclecars, and street rods. FAST XDi EZ-RUN distributors are available for most domestic V8 applications. Choose the model designed for your year/make and engine application.

5.0 out of 5 stars ( 2 )

$297.95

$382.95

FAST XR-i Points-to-Electronic Ignition Conversion Kits

Tired of setting your points, or hitting that magical point at higher RPM where they seem to float, costing you power and performance? It's time to pull out those ancient contacts and benefit from modern day, digital technology with FAST XR-i Points-to-Electronic Ignition Conversion Kits. The XR-i is a compact module that bolts directly in place of the breaker point assembly. It simply triggers from the factory cam lobe, making installation a breeze with only two wires to connect. The microcontroller of the module manages the signal and dwell time in the coil to produce a much higher output spark that will improve the performance and drivability of your classic as well. Another great feature is a built-in adjustable rev limiter to protect your engine in the event of driveline failure or a missed shift. Features include: * Increased spark output for improved drivability * Pinpoint accurate timing * Better fuel mileage * Faster and more reliable engine starts * Digital and maintenance free * Fully sealed from moisture and dirt * Adjustable rev limiter can be set from 4,000 to 8,000 RPM

2.67 out of 5 stars ( 24 )

$86.95

$149.95

FAST Fluid Temperature Sensor and Converter Kits

FAST fluid temperature sensor and converter kits provide an easy and economical way to measure fluid temperature and convert to a universal 0 to 5 V output, perfect for use with EFI systems and dataloggers. Designed around the widely available GM-style intake fluid temperature sensors, these FAST kits are ideal when trying to measure engine oil, coolant, transmission, intercooler/heat exchanger fluids, and rear differential temperatures. FAST fluid temperature sensor and converter kits come complete with fluid temperature sensor and pre-terminated sensor module, and installation is simple, with only three wires to connect.

Not Yet Reviewed

$87.95

FAST XFI Dash Data Loggers

FAST XFI dash data loggers function as both electronic dashboards and data loggers for vehicles running FAST XFI fuel injection systems. Optional accessories, such as the FAST accelerometer, EGT modules, and dual sensor air/fuel meters can all be monitored in combination with XFI-based engine data through the loggers' high-speed CAN bus. With state-of-the art monitoring and data logging capabilities, they can assemble a comprehensive, real-time picture of just what is going on under the hood of your vehicle as it screams down the drag strip. They feature a 6 in., fully programmable LCD touch-screen display and have the ability to display their data in a multitude of scales, units, and gauge configurations for your viewing convenience. The backlit display is highly visible and can be user-customized to a wide variety of configurations at the mere touch of a finger or stylus. The FAST XFI dash data loggers are engineered to work with any level of vehicle modification, from stock to all-out race. They are able to monitor and display output from a variety of different input sources, including frequency (rpm, wheel speed, etc.), analog input, and sources that require programmable input parameters, such as MAP and MAF. As data loggers, they deliver over 1 hour of data logging time with the standard 2 MB memory module; optional memory modules of up to 16 MB are available separately. They do not require immediate data downloads between drag strip runs--all of the data collected over the course of a racing event may simply be stored and then downloaded for analysis at a later time.

2.0 out of 5 stars ( 1 )

$1,069.95

FAST EGT Probes

FAST XFI EGT (Exhaust/Gas/Temperature) module allows XFI owners to monitor up to 8 EGT sensors. FAST offers single EGT 1/4 in. probes in several lengths to use with your XFI module. Monitor exhaust gas temperatures with your XFI module using FAST EGT probes.

Not Yet Reviewed

$163.95

FAST XR-1A High-Output Ignition Coils

FAST XR-1A high-output ignition coils are designed specifically for high-compression naturally aspirated, boosted, or nitrous-equipped applications making more than 1,000 hp. This horsepower range is far beyond the capabilities of OE coils. The spark energy of the FAST coils is comparable to CDI (capacitive discharge ignition) systems without the need to convert. The smart coil design also requires no ignitor module. XR-1A high-output ignition coils deliver up to 44,000 volts, 103mJ of energy, and support a maximum of 19 amps of current and 17 volts. They're designed to work with all OEM equipment, as well as FAST products that support coil-near-plug applications such as the XIM and EZ-LS ignition controllers. Order the coils for your application individually or in a set of eight.

Not Yet Reviewed

$91.95

$843.95

FAST XR-1A High-Output Ignition Coil Harnesses

XR-1A high-output ignition coils from FAST are great for Ford racers, as the factory option is not ideal for engines with high cylinder pressures. However, these aftermarket coils can be difficult to wire thanks to the complexities of the Ford engine. FAST's XR-1A high-output ignition coil harnesses are pre-made to simplify the XR-1A coils on a Ford Mod or Coyote engine that utilizes FAST XIM ignition control module. The harnesses feature a pair of heavy-duty 30 amp relays and fuses, along with heavy-gauge power and ground lead wire to support the high-current demand of XR-1A coils. They are also designed with extra length to accommodate coils that are mounted on or near the cylinder heads or remote-mounted off the engine.

Not Yet Reviewed

$287.95

FAST Dual-Sync Billet Distributors

These FAST dual-sync billet distributors are an easy, drop-in, plug-and-play solution for fully sequential high performance V8 electronic fuel injection engine applications. They feature reluctors and pickups that have been properly aligned right out of the box, so you don't have to set crankshaft reference angles or phasing in the rotor prior to installation. The FAST dual-sync billet distributors have housings that are CNC-machined from high-quality 6061-T6 billet aluminum and include adjustable slip collars to ensure perfect cam gear alignment. Using high-output magnetic pickups to generate high-capacity, noise-resistant, discrete switching signals for the FAST XFI ECU, they offer extremely precise ignition timing and long life. Deliver strong, powerful energy to your spark plug wires with one of these FAST dual-sync billet distributors.

4.0 out of 5 stars ( 28 )

$429.95

$545.95

FAST XDi Pro Race Circle Track Distributors

FAST XDi Pro Race Circle Track distributors highlight machined billet housings. Available for several applications, the GM models have adjustable slip collars and most are approved for use in NASCAR competition. FAST XDi Pro Race Circle Track distributors typically feature: * Dual optical triggers synchronized within .2 degrees * Precision, stainless steel, photochemically etched trigger disc * Electronically synthesized magnetic trigger output * Ground and polished steel shaft * Wire retainer cap for secure fit * Individual cylinder timing capability * Double lip seal on shaft for oil and vacuum control * Status LED light for quick diagnostic check on optical triggers * Timing light tuning within .5 degree of optimum timing point * Distributor equipped with two optical triggers for redundancy

Not Yet Reviewed

$953.95

  • 1
  • Page 1 of 1

Modal Header