Availability
On Sale
AEM Electronics inline wideband UEGO controllers give all the benefits of the AEM Electronics wideband Air/Fuel gauges to those who do not require or want an additional gauge in the car. Perfect for datalogging, engine management systems or racing applications where a gauge is not desired. With simple wiring and easy installation, the weatherproof controller can be mounted anywhere in or outside the vehicle. The system features a Bosch sensor with an accuracy of .1 AFR, making it among the fastest and most accurate widebands available. Other features include: * Ideal AFR monitoring tool for EFI and carburated applications, and engine dynamometers * Does not oscillate AFR reading like narrow band sensors * No laptop required for monitoring! * 0-5V analog output included for use with data loggers and virtually any engine management system * Detects AFR sensor problems and outputs error values which can be used to deactivate feedback * Reads Gasoline AFR values from 8.5 to 18:1 AFR * Reads E85 AFR from values 5.7 to 12:1 AFR * Reads Ethanol AFR values from 5.2 to 11:1 AFR * Reads Methanol AFR values from 3.7 to 7.8:1 * Reads Lambda values from 0.58 to 1.22 AFR
( 6 )
$206.95
$186.25
On Sale
AEM Electronics Wideband UEGO Controller Air/Fuel ratio gauge components are designed to be used with AEM wideband UEGO controller air/fuel ratio gauges. Whether you need to replace your sensor or cable, these parts will help you to get your gauge back in working order.
( 23 )
$40.28
—
$145.95
$36.25
—
$131.35
On Sale
AEM Electronics high-output, insulated gate bipolar transistor (IGBT) inductive Smart Coils are designed for use on applications that do not have an external ignitor. The tradeoff between adequate spark energy and adequate spark duration ends with AEM's inductive Smart Coils, the first inductive coils that deliver CDI-like spark energy and voltage, and the long spark duration necessary for vehicles running high compression, high RPM, forced induction and/or nitrous engines. AEM's inductive Smart Coils each deliver over 100mJ of spark energy and a minimum of 40,000 Volts! That's as much as most CDI systems, without the need for a CDI module! They also provide very long spark duration at full energy, unlike CDI systems and multiple spark systems which fire off small spark events prior to and after their CDI burst to mimic longer spark duration. Smart Coil's feature a weather and shockproof design that can be mounted directly to the engine, and they cost less than other aftermarket LS coils. Upgrade your ignition on your forced induction, nitrous, or high RPM engine today with AEM Electronics IGBT inductive Smart Coils.
( 2 )
$87.15
$78.45
On Sale
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$87.15
—
$206.95
$56.65
—
$186.25
On Sale
AEM 22-channel CAN sensor modules provide a way for users with carbureted vehicles to add an AEM CD digital dash display. They also let users with existing CAN-based devices add more channels to the display for viewing and/or data logging. These 22-channel modules convert analog, digital, and frequency inputs into an AEMnet CAN bus signal that can be transmitted to AEM's CD-5 carbon and CD-7 digital dashes. AEM Electronics 22-channel CAN sensor module includes: * Wiring harness with 36 in. flying leads and pre-wired CAN cable * IP65-rated enclosure is dust-tight and water-resistant * Daisy-chain two modules together for additional channels (modules sold individually) * Four dedicated 0-5 V analog inputs * Four temperature (thermistor) inputs * Four user-configurable inputs for 0-5 V, temp (including RTD) * One dedicated fuel level input (0 to 250 ohm range) * Six digital inputs, active low, protected to about 18 V, frequency, duty cycle or simple switch * One tach input, trigger when low, 12 V internal pull up * Two VR pair frequency inputs (crank, wheel, or driveshaft speeds) * Jumper selectable CAN bus speeds, 250k, 500k, 1M * Jumper selectable terminating resistor * Jumper selectable header length, 11 bit or 29 bit
Not Yet Reviewed
$413.95
$371.95
On Sale
These AEM Electronics wideband UEGO sensors are used in AEM single channel UEGO systems. They may also work with other wideband UEGO controllers. Features include: * Much more accurate AFR readings than OEM sensors * Response time of less than 100 milliseconds * Measure from 11:1 AFR to atmospheric air * Latest Nernst cell/oxygen pump hybrid technology * Planar-configured zirconium dioxide sensor * Integrated heater element warms up in less than 20 seconds * PTFE insulators withstand temperatures of up to 1,400 degrees Fahrenheit (800 degrees Celsius) * Low current draw
( 22 )
$111.95
$100.75
—
$158.95
On Sale
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$54.45
—
$70.79
$49.05
—
$63.75
On Sale
AEM Electronics 6-Channel CAN sensor modules provide an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to your CD Carbon Digital dash through AEMnet CAN bus. The modules support the Bosch CAN 2.0b standard, making it compatible with many third-party devices that accept a programmable CAN bus input, which also allows you to add additional channels to a non-AEM ECU, dash, or logger. Features include: * Two temperature (thermistor) inputs * Two dedicated 0 to 5 V analog inputs * One dedicated fuel level input (0 to 250 Ohm range) * One tachometer/coil input * Fixed CAN bus speed, header length, and base address * IP67 potted enclosure/sealed connector—dust-tight and protected against water spray * Protected inputs * 12-pin DTM-style connector and pins
Not Yet Reviewed
$189.95
$170.95
On Sale
AEM Electronics 4-Port AEMnet CAN Hubs eliminate the need to daisy-chain multiple AEMnet devices together using Y-cables. Now you can easily connect and power multiple AEMnet CAN devices from a central docking station! The four integrated 4-way DTM-style housings provide a reliable AEMnet CAN connection and are safe for engine bay mounting. AEM Electronics 4-Port AEMnet CAN Hubs include the following: * 4-Port AEMnet CAN Hub * Two 4-40 x 7/8 in. flat head screws * Two 4-40 x 0.375 in. washers * Two 4-40 x 9/64 in. Nylock nuts
( 1 )
$99.95
$89.95
On Sale
Keep track of temperature levels with AEM Electronics air inlet temperature sensor kits. They include an aluminum weld-in bung, connector plug, and flying lead and sensor to complete the installation. Monitoring engine functions can stop a problem early--pick up AEM Electronics air inlet temperature sensor kits for trouble-free performance.
( 8 )
$67.55
—
$70.79
$60.75
—
$63.75
On Sale
AEM Electronics offers a variety of replacement parts—including these harnesses for X-Series wideband with oxygen sensor gauges. They provide plenty of length for routing where necessary.
Not Yet Reviewed
$33.74
$30.37
On Sale
AEM Electronics high output inductive dumb ignition coils ain't so dumb! Designed to be used with an igniter, these AEM "dumb" coils offer CDI-like spark energy and voltage, plus the longer spark duration of inductive coils--and that's pretty smart! But that's not all. They easily install in the place of your existing coils, are shock and weather-proof, affordable, and they deliver world-class performance. That makes you smart for choosing them! If you want massive spark energy with an incredibly long spark duration, AEM high output inductive dumb ignition coils are an intelligent solution for any enthusiast running boost, nitrous, or high rpm.
( 2 )
$87.15
$78.45
Just like you, the staff at AEM frequently race. They buy and install parts, too—and they don't like to compromise. So, if the cables or sensors for your AEM Performance electronics gauge become damaged, AEM Electronics gauge power harnesses are offered to restore both their digital and analog-style gauges to full function. Order the replacement recommended for your original part.
( 1 )
$20.66
On Sale
AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.
( 2 )
$2,099.95
$1,438.95
—
$1,949.95
AEM Electronics RTD and K-Type thermocouple sensors are the perfect solution for viewing and logging various temperatures—including exhaust gas temps (EGTs), cylinder head temps, pre and post intercooler temps, air temps, water temps, fluid temps, disc brake temps, and more. AEM offers a durable closed-tip RTD-type high temp sensor (PN 30-2052) and an inexpensive, fast-responding K-Type, closed tip thermocouple sensor (PN 30-2068). RTD-Type temperature sensors are packed with features that deliver consistent measurement and long life. These EGT sensors include a closed-tip design that lasts longer than the previous generation's perforated tip design; and the tip is smaller for less intrusion and less restriction. Inconel-tubing protects the wiring, which is terminated with a high-quality DTM-style 2-pin connector. Each sensor reads a temperature range of -40 to 1,560 degrees F (-40 to 850 degrees C), and their thin-film platinum element provides a high degree of accuracy (+/- 0.9 percent from 536 to 1,560 degrees F). The RTD-Type sensors are built with a 90-degree bend at the sensor tip for easier installation in tight spaces, and they include a weld-in sensor bung with machined M14x1.5 threads.
Not Yet Reviewed
$172.95
AEM Electronics No-Weld O2 sensor mounts enable users to mount a wideband O2 sensor without having to weld a sensor bung onto the exhaust. This is especially helpful for those that don't know how to weld or can't find someone that does. Simply drill a hole in the exhaust, install the gasket, and bolt the clamp. It's that easy!
( 23 )
$66.45
On Sale
Engineered to outperform, AEM Electronics Smart Pencil ignition coils are designed to help you unlock more power and efficiency from your ignition system. Manufactured using advanced bobbin technology, specialized silicone magnetic steel cores, and precision-wrapped windings, AEM Smart Pencil ignition coils ensure optimal resistance and accurate turn ratios, delivering consistent, high-energy spark while enhancing thermal stability and mechanical strength for reliable performance under demanding conditions. They deliver up to 10 percent more spark energy in a compact OEM-style package, providing a true drop-in performance upgrade--no modifications required. Experience enhanced ignition performance with the convenience of a direct-fit solution. Select the coils designed for your vehicle.
Not Yet Reviewed
$44.95
$40.46
On Sale
AEM CD-5 Carbon digital racing dash displays are the lightest, brightest, ultimate track day digital dashboard displays that play well with others! The CD-5 units accept channels from two separate user programmable CAN bus connections—works with AEMnet enabled devices and non-AEM third party devices side-by-side. More key features and benefits: * Full-color, 5 in. screen * Direct sunlight readable (1000cd/m2 brightness and anti-glare filter) * Seven LED rpm/shift light indicators on top of the housing are programmable and dimmable * Layout files interchangeable with all versions of the CD-7 * Wiring interface/harness is identical to the CD-7 * Rugged, lightweight flow-molded carbon fiber composite enclosure * Two additional programmable LEDs are located above toggle buttons on the top of the housing on either side of the integrated LED shift lights * IP66 water resistance allows for operation in boats and motorcycles without worry * Seven programmable pages, including four main pages, alarm, on-change and start-up pages * Dedicated alarm page quickly identifies problems, and is programmable in almost any language (user defined) * Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc. * Convert CAN bus channel values to user-defined text in multiple languages * Available with or without 200Mb internal logging (up to 1,000Hz/channel) * Available with or without on-board GPS receiver and antenna * Use included page layouts and input your channels and text, or create your own from scratch
Not Yet Reviewed
$1,599.95
$1,033.95
—
$1,549.95
On Sale
AEM Electronics cam angle sensor discs are 24-tooth direct replacements for the factory CAS discs and may be necessary with some Series 1 or 2 EMS when you need to run a different CAS. Before purchasing, be sure that the center of the AEM CAS disc looks exactly like the stock disc in your distributor, and match the hubs of your disc to your AEM disc before ordering.
( 1 )
$54.45
$49.05
On Sale
You have an alternative choice for flex fuel sensors--AEM Electronics ethanol content sensors. While most gas stations label their flex fuel as E85 (85 percent ethanol/15 percent gasoline), the actual content could be quite different. AEM sensors deliver the ability to determine the composition of the fuel blend pumped into your vehicle at any given time. They measure content percentage and fuel temperature allowing users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize their engine's tuning calibration for fuel ethanol content. These kits include plug and pins for electrical connections, as well as either -6AN or hose barb fittings (depending on kit chosen) for integration into the fuel system.
( 4 )
$222.95
—
$328.95
$200.65
—
$296.05
On Sale
HV (high-voltage) contactors are widely used in electric vehicles (EV) and hybrid electric vehicles (HEV). AEM Electronics offers a couple of choices in this area with their Rincon Power high-voltage contactors. One is a low-cost, pre-charge solution that meets RoHS 2011/65/EU and is PCB (printed circuit board) mountable. The other is hermetically sealed with gas fill and has an integrated coil economizer to reduce coil holding power. It meets RoHS 2011/65/EU, is CE certified, and IEC60947-4-1 compliant. Choose the one needed for your application.
Not Yet Reviewed
$56.65
$31.16
—
$158.95
AEM Electronics Rincon Power high-voltage battery disconnect switches are hermetically sealed and gas filled. They are intrinsically safe with industry leading dielectric performance. AEM EV Rincon Power battery disconnects are available in two amperage ratings. Choose the one you prefer. Features: * Robust metal-ceramic hermetic seal * Industry leading dielectric withstand voltage * High-temperature performance * Ultra-low contact resistance over life * Ready for harsh environments * Designed for OSHA compliant lockout/tagout (LOTO) * Drop-in replacement for GIGAVAC1 HBD Series battery disconnect switches * Optional integrated auxiliary contacts
Not Yet Reviewed
$199.95
—
$214.95
AEM Electronics unsealed BMS satellite installation kits are supplied with the PCB connector, terminals, and wiring leads. The mission from AEM Electronics is to make high-quality and intuitive products that are simple to use and provide powerful control for vehicles and motorsports applications.
Not Yet Reviewed
$209.95
AEM Electronics Universal EMS Wideband UEGO sensor kits are designed for use with your AEM UEGO system. They include an oxygen sensor, connector plug, silicone wire seal, and wire terminals. Complete your UEGO installation with AEM Universal EMS Wideband UEGO sensor kits.
Not Yet Reviewed
$210.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
