Availability
Jenny offers electric tank mounted stationary air compressors in a variety of options—including single-stage, two-stage, and duplex models. They're available in multiple tank sizes and PSI ranges, with a vertical or horizontal layout. Order the industrial compressor best suited for your applications.
Not Yet Reviewed
$3,316.99
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$4,554.82
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$3,707.88
—
$5,296.82
EMAX offers industrial 250 Series vertical piston compressors in a variety of capacities and power levels: * Model EMX-ESL05V060V1: The EMAX 250 Series 5 hp 60 gal. 1-stage 2-cylinder, single phase air compressor is designed for up to 50,000 hours of use with proper maintenance. This EMAX air compressor is equipped with an all-cast iron splash lubricated pump producing 19 cfm at 100 psi. It also features an industrial grade 1.1 Service Factor 1740 rpm electric motor, Condor Pressure Switch, manual drain valve, 60 gal. powdercoated ASME tank with 1/4 in. mounting pads, OSHA-approved 13 G steel belt guard, and 3/4 in. air outlet. EMAX air compressors are built and tested in Ohio with reliability and durability in mind. * Model EMX-ESL07V080Y1: The EMAX 250 Series 7.5 hp 80 gal. 2-stage 3-cylinder, single phase air compressor is designed for up to 50,000 hours of use with proper maintenance. This EMAX air compressor is equipped with an all-cast iron splash lubricated pump producing 26 cfm at 100 psi. It also features industrial grade 1,750 rpm electric motor, magnetic starter, manual drain valve, 80 gal. powdercoated ASME tank with 1/4 in. mounting pads, OSHA-approved 13 G steel belt guard, and 3/4 in. air outlet. * Model EMX-ESL10V080V1: The EMAX 250 Series 10 hp 80 gal. 2-stage V4, single phase air compressor is designed for up to 50,000 hours of use with proper maintenance. This EMAX air compressor is equipped with an all-cast iron splash lubricated pump producing 38 cfm at 100 psi. It also features an industrial grade 1.1 Service Factor 1,740 rpm electric motor, magnetic starter, manual drain valve, 80 gal. powdercoated ASME tank with 1/4 in. mounting pads, OSHA-approved 13 G steel belt guard, and 3/4 in. air outlet.
Not Yet Reviewed
$2,435.88
—
$3,707.88
These OTC low-lift transmission jacks with an 8.250 in. low height are perfect for trucks with low ground clearance. A special mounting adapter fits popular Eaton, Fuller, and Roadranger transmissions used on nearly all Class 7 and 8 heavy-duty trucks. The mounting plate angle is adjusted with a turn of a wrench. OTC designed these jacks with a swiveled pump handle to permit ease of operation in tight areas.
Not Yet Reviewed
$3,233.99
On Sale
Summit Racing™ mega outdoor bundles let you save time and money by ordering a complete package that's ideal for tailgating, picnics, camping, vacation travel, and more. These all-inclusive bundles include a pop-up canopy tent, four freestyle folding rocking chairs, an overland galley compact stove and kitchen, 45-quart cooler, hitch-mount cargo carrier, cargo carrier bags, battery backup portable refrigerator/freezer, and cornhole game. Just add food and beverages for fun with family and friends! Click the "Kit/Combo Contents" tab above for details on each of the items contained in the bundle.
Not Yet Reviewed
$2,632.94
$2,167.88
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
