Availability
Dakota Digital universal speedometer and tachometer interfaces deliver the functionality of three devices in one. These units can adjust/split/re-calibrate an electronic speed signal, calibrate a tach signal, and aid in the creation and adjustment of a gas tach signal for diesel swap applications. Features and benefits include: * Speed calibration from 25 percent to 400 percent * Multiple speed outputs available for multiple devices * Electronic pull-up built in; high or low voltage input * Tachometer settings from 1-16 cylinders and 5 V or 12 V signal type * Diesel applications: outputs for 4, 6, or 8-cylinder tachs * Bluetooth technology synchronizes unit to available mobile app for programming and setup * Built-in programming buttons and LED display for setup in lieu of app * Not for use with ABS sensors or systems
( 26 )
$128.25
Holley Easy Level fuel level senders use LiDAR technology to precisely measure the depth of fuel remaining in your tank and work with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range fuel gauges. They also work with many other gauge brands. Compatible with tanks ranging from 4 to 39 in., setup is a breeze with the on-board buttons. Easily set empty and full tank positions, with reserve, right on your workbench before installing and then set the empty, half, and full positions on the gauge. The desired dampening rate is adjusted with dip switches right on the unit to reduce fuel slosh and gauge bounce by adjusting how fast or slow the gauge reacts to the fuel level change. Upgrade Classic Instruments' gauge sets and other brands to capture the benefits of Laser imaging, Detection, and Ranging (LiDAR) technology with Holley Easy Level senders. This exciting and innovative automotive application replaces vulnerable moving parts with a hi-tech laser. Besides the problems encountered with float setup, hitting baffles or tank wall, Easy Level eliminates having to set up the float-type sender, saving time and effort. Features: * Quickly reads fuel levels with zero contact * Easy installation with no moving parts; popular 5-bolt flange * Long life sensor and no failing floats * Easy to program the level of any tank and electronic gauge * Bolt Circle Diameter (BCD) is 2.122 in. * Output is a PWM signal for 12 V applications (10 to 20 V maximum) * Mounting hardware and rubber gasket * Maximum operating temperature of 185 degrees Note: Does not work with OE-style gauges that utilize an ohm only input
( 2 )
$124.95
Dakota Digital offers a wide range of gauge control modules and related accessories, including these replacement VHX control boxes. They're designed for use with analog gauges. The control boxes are made from original materials and specs to ensure proper fit and performance.
Not Yet Reviewed
$389.45
Dakota Digital gauge pressure sending units are available for a variety of gauge applications. Each sending unit is made using high-quality materials by the pros at Dakota Digital.
( 19 )
$57.00
—
$156.75
Is your ride's fuel gauge on the "level"? If you don't think you're getting the right readings or you're getting no reading Tanks can help fix the miscommunication. Their fuel level sending units are quality units built to send reliable, accurate data to your gauge so you will know exactly where you sit on fuel. Keep the communication honest with Tanks fuel level sensors on board.
( 313 )
$41.99
—
$174.99
Tanks Inc. MeterMatch fuel gauge interface modules will allow you to convert any ohm range fuel level sender to work with any ohm range fuel gauge. No longer do you need to drop your tank to change or customize your sender, or re-calibrate your fuel gauge. With Tanks Inc. MeterMatch device you can ensure that your gauges are accurately reading your fuel sender and more! Features include: * User can calibrate a custom ohm range (between 0 to 3,000 ohms) * Interface is compatible with nearly any short sweep fuel gauge and fuel sender combination * Module allows gauge calibration at empty, full, and two other points ensuring accurate readings—even with odd shaped gas tanks * Module allows for low and/or high set points that can trigger a blinking LED indicator to alert if gauge exceeds normal values * Screw terminal wire connections * Compact size ( 2.4 in. x 1.85 in. x 0.93 in.) * Simple rotary knob and push button calibration * Programmable voltage correction * Programmable low (or high) alarm (works with a LED indicator) * Programmable averaging can be turned on or off to help minimize needle bouncing * Gauges not included (sold separately from MatchMeter device)
( 21 )
$89.99
Stewart Warner replacement senders are used with electrical gauges. They offer senders for electric oil, fuel pressure, and electric temperature gauges. Stewart Warner Performance replacement senders are designed to be used with Stewart Warner Performance gauges.
( 192 )
$5.99
—
$88.99
Summit Racing™ GPS speedometer sending units are designed to work with electronic speedometers to provide accurate readings. They require no additional sensor from the transmission to operate the speedometer. These sending units work with most aftermarket speedometers that accept an industry standard 4,000, 8,000, or 16,000 pulses per mile signal, or with any programmable speedometer. The senders include a GPS receiver and a microprocessor with LED status indicator.
( 19 )
$111.99
These Stewart Warner Performance gauge sending units ensure that you get fast, accurate information from your Stewart Warner gauges. A variety of sending units is available for use with Stewart Warner temperature, pressure, fuel level, and speedometer gauges.
( 73 )
$11.99
—
$93.99
New Vintage USA GPS speedometer senders are compact units that mount virtually anywhere and deliver a steady, smooth signal to any electronic programmable speedometers. So, if you need an easy way to pick up your speed signal, or have a transmission without a built-in VSS or cable output, a New Vintage USA's GPS speedometer sender may the just the part you're looking for!
( 10 )
$154.99
If your sending unit has gone south, then you need to get one of these Motorcraft fuel tank sending units. They are made from high-quality materials, so you know that they will fit.
( 4 )
$40.99
—
$2,229.99
Intellitronix GPS speedometer senders are designed to connect directly to your electronic speedometer to give you extremely accurate readings! No additional sensor from the transmission is needed to operate your speedometer. They will work with all Intellitronix or any other manufacturer's speedometers that accept an industry standard 4,000, 8,000, or 16,000 pulses per mile signal, or with any programmable speedometer. The senders come complete with a GPS receiver, an on-circuit-board antenna, and a microprocessor with LED status indicator that continuously convert GPS signals into a pulse stream that replicates the output from your mechanical speed sensor, but with GPS accuracy. You won't have anymore inaccurate speedometer readings due to different tire sizes or rear-end gear ratios.
( 79 )
$136.45
Stewart Warner GPS speedometer receiver modules provide true ground speed. They are designed to be used with electronic speedometers that are calibrated to either 8,000 or 16,000 ppm (pulses per minute). These units work out of the box with Stewart Warner Wings, Power Series, and Greenline speedometers, as well as with their Deluxe speedometers with 120 mph scale and higher.
( 14 )
$210.99
AutoMeter replacement senders are used with electrical gauges. The sending units are offered for more than a dozen gauge functions, including fuel, oil, water, boost, brake, oxygen, and nitrous data. They're available in different thread sizes, and some include adapter fittings.
( 249 )
$20.99
—
$219.99
The need for speed is often accompanied by a demand for accurate feedback. In fact, a speedometer at times becomes the most important gauge on the dash panel. If your system is malfunctioning or you prefer an upgrade in data precision, Dakota Digital electronic sending units deliver clean, sharp signals from your transmission to the speedometer. Some replacement kits process 8K pulses per mile, and others 16K, for instance--you choose the application and attachment style that's best for your particular vehicle.
( 65 )
$41.80
—
$57.00
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$87.15
—
$199.95
Since different manufacturers use different ohm ranges on their gauges and senders, why not purchase the corresponding VDO pressure sender for your VDO gauge? VDO produces these top-quality sending units for use with all of their electrical gauges to ensure accurate readings and a long life.
( 99 )
$23.99
—
$116.99
Summit Racing™ offers restoration fuel sending units for a wide range of Chevrolet Cars , Trucks and GMC trucks from the 1940s, '50s, '60s, and '70s. These are exact reproductions of the originals, guaranteed to deliver accurate readings to your dash panel fuel gauge. Assembled from stainless steel for rust resistance, the sending units come with gaskets and all necessary hardware for installation. "Running on empty" may be a good song title, but it's not what any driver wants on the road or the track. Always know what's in the tank; order the fuel level sending unit replacement recommended for your vehicle.
( 53 )
$34.99
—
$159.99
Dakota Digital OBD II tachometer/speedometer interfaces are designed to plug directly into the OBDII diagnostic connector, providing a user-adjustable traditional speedometer, tachometer and check engine output for your choice of aftermarket instruments. Features include: * User selectable output of: 4k, 8k, 16k PPM signals, Sine or Square wave options * +/-35% speed signal correction, compensating for tire size or gearing changes * Adjustable 4, 6 or 8 cylinder tachometer signal output * Check engine light output provides a grounded (-) output to activate a check engine light of your choice *Automatically calibrated output for an aftermarket cruise control can be activated by making connection to the higher-resolution fixed VSS sensor
( 12 )
$123.50
The AEM Electronics 8-Channel K-Type EGT CAN module uses an integrated cold junction sensor to ensure lab-grade temperature readings across all eight channels. It has the ability to read better than one percent full scale, even at the extreme temperature range (-328 to 2,501 degrees F). The module also includes open circuit/fault detection to notify you if a sensor loses its connection or needs to be replaced. This unit will work with non-AEM devices with configurable CAN bus. The module utilizes flexible CAN configuration jumpers, which allow it to be used with just about any third party devices. Features and benefits include: * Includes 8 K-type thermocouple inputs to accept common K-type thermocouple sensors * Uses common miniature thermocouple sockets * Daisy-chain two modules together for up to 16 temp inputs through a single plug * Outputs all channels via configurable CAN bus via one-plug connection * Cold junction compensated for lab-grade accuracy * Temperate resolution 0.18 degrees F * Integrated open circuit/fault detection
Not Yet Reviewed
$486.95
Use a New Vintage USA speedometer sender to convert your mechanical speedometer takeoff or your electronic sensor-style speedometer output to an electronic pulse output. These speedometer senders are designed for use with custom installations, early model transmission applications, and all Marshall electronic speedometers.
( 15 )
$39.95
—
$109.99
Don't take chances with old, questionable, or faulty coolant temperature sending units that can give misleading information to you and your vehicle's computer. Standard Motor Products replacement coolant temperature senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These temperature sensors are available in many sizes and configurations to fit a wide range of cars spanning several decades. Trust your vehicle's electrical system needs to Standard Motor Products.
( 98 )
$5.99
—
$54.99
Dakota Digital tire pressure monitoring systems will be the finishing touch to your hot rod. These TPMS units are the expansion modules for Dakota Digital HDX instrument systems—and give you real-time pressure readings for all four tires, displayed in your existing message center. The kits include four wireless valve stem sensors that report back to a vehicle-mounted receiver for on-the-fly information. They are easily reprogrammable upon tire rotation or replacement. No more tire kicking! Dakota Digital tire pressure monitoring systems provide the information you need.
Not Yet Reviewed
$489.25
Just going with the flow? Not a good idea when dealing with the gas level in your vehicle. Dorman fuel tank level sending units are solutions to help keep you from running out of gas. These quality OE replacements will restore reliable fuel gauge readings with the proper fit and function. Replace a failing unit with the Dorman tank level sensor designed for your vehicle application.
( 57 )
$37.99
—
$292.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
