Availability
Showing In Stock Items. Show All 301 Items.
Dakota Digital universal gear shift sending units are designed for use with the Dakota Digital gear shift position indicators. They include mounting hardware, a wiring harness, and a control box. The sending units also feature a built-in neutral safety switch and back-up light circuit. Required gear position indicators are sold separately.
( 41 )
$142.50
Dakota Digital universal speedometer and tachometer interfaces deliver the functionality of three devices in one. These units can adjust/split/re-calibrate an electronic speed signal, calibrate a tach signal, and aid in the creation and adjustment of a gas tach signal for diesel swap applications. Features and benefits include: * Speed calibration from 25 percent to 400 percent * Multiple speed outputs available for multiple devices * Electronic pull-up built in; high or low voltage input * Tachometer settings from 1-16 cylinders and 5 V or 12 V signal type * Diesel applications: outputs for 4, 6, or 8-cylinder tachs * Bluetooth technology synchronizes unit to available mobile app for programming and setup * Built-in programming buttons and LED display for setup in lieu of app * Not for use with ABS sensors or systems
( 27 )
$128.25
Holley Easy Level fuel level senders use LiDAR technology to precisely measure the depth of fuel remaining in your tank and work with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range fuel gauges. They also work with many other gauge brands. Compatible with tanks ranging from 4 to 39 in., setup is a breeze with the on-board buttons. Easily set empty and full tank positions, with reserve, right on your workbench before installing and then set the empty, half, and full positions on the gauge. The desired dampening rate is adjusted with dip switches right on the unit to reduce fuel slosh and gauge bounce by adjusting how fast or slow the gauge reacts to the fuel level change. Upgrade Classic Instruments' gauge sets and other brands to capture the benefits of Laser imaging, Detection, and Ranging (LiDAR) technology with Holley Easy Level senders. This exciting and innovative automotive application replaces vulnerable moving parts with a hi-tech laser. Besides the problems encountered with float setup, hitting baffles or tank wall, Easy Level eliminates having to set up the float-type sender, saving time and effort. Features: * Quickly reads fuel levels with zero contact * Easy installation with no moving parts; popular 5-bolt flange * Long life sensor and no failing floats * Easy to program the level of any tank and electronic gauge * Bolt Circle Diameter (BCD) is 2.122 in. * Output is a PWM signal for 12 V applications (10 to 20 V maximum) * Mounting hardware and rubber gasket * Maximum operating temperature of 185 degrees Note: Does not work with OE-style gauges that utilize an ohm only input
( 3 )
$124.95
AutoMeter GPS speedometer interface modules can turn any electronic speedometer into a GPS speedometer with just the push of a button. They offer plug-and-play functionality with any AutoMeter programmable electronic speedometer and simple on-button, 10-second calibration for nearly every other electronic speedometer on the market. They feature IP67 construction and are fully sealed against water and dust. They include a fully sealed and paintable magnetic micro antenna and a lightning-fast 10 Hz sampling rate.
( 47 )
$258.99
Dakota Digital gauge pressure sending units are available for a variety of gauge applications. Each sending unit is made using high-quality materials by the pros at Dakota Digital.
( 21 )
$57.00
—
$156.75
Dakota Digital offers a wide range of gauge control modules and related accessories, including these replacement VHX control boxes. They're designed for use with analog gauges. The control boxes are made from original materials and specs to ensure proper fit and performance.
Not Yet Reviewed
$389.45
New Vintage USA GPS speedometer senders are compact units that mount virtually anywhere and deliver a steady, smooth signal to any electronic programmable speedometers. So, if you need an easy way to pick up your speed signal, or have a transmission without a built-in VSS or cable output, a New Vintage USA's GPS speedometer sender may the just the part you're looking for!
( 11 )
$154.99
A malfunctioning gas tank sending unit can be annoying at best, and leave you stranded at worst! Ensure that your fuel level readings are accurate by replacing a faulty component with one of these Auto Metal Direct fuel tank sending units. They're designed to meet or exceed OE specifications, and are made to fit and function just like the factory originals. Be confident in your fuel level readings with Auto Metal Direct gas tank sending units!
( 42 )
$43.99
—
$86.50
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$87.15
—
$199.95
AutoMeter replacement senders are used with electrical gauges. The sending units are offered for more than a dozen gauge functions, including fuel, oil, water, boost, brake, oxygen, and nitrous data. They're available in different thread sizes, and some include adapter fittings.
( 231 )
$19.99
—
$174.99
Dakota Digital OBD II tachometer/speedometer interfaces are designed to plug directly into the OBDII diagnostic connector, providing a user-adjustable traditional speedometer, tachometer and check engine output for your choice of aftermarket instruments. Features include: * User selectable output of: 4k, 8k, 16k PPM signals, Sine or Square wave options * +/-35% speed signal correction, compensating for tire size or gearing changes * Adjustable 4, 6 or 8 cylinder tachometer signal output * Check engine light output provides a grounded (-) output to activate a check engine light of your choice *Automatically calibrated output for an aftermarket cruise control can be activated by making connection to the higher-resolution fixed VSS sensor
( 12 )
$123.50
On Sale
Holley aluminum fuel cells come in a several variations for nearly every race application, and Holley's fuel gauge sending units are the correct replacements to restore consistent level readings. Offered in an 8 or 9 in. depth for 5- and 10-gallon or 15- and 20-gallon fuel cells respectively, both styles have a tube design that acts as a damper, saves space, and eliminates the need for a float arm. They are 0 to 90 ohms (empty-full) to work with most aftermarket gauges, have a standard SAE 5-bolt mounting pattern, and include gasket and mounting hardware. Holley fuel gauge sending units are E85 compatible. Choose the best fit for your fuel cell.
Not Yet Reviewed
$68.25
$44.36
—
$68.25
The AEM Electronics 8-Channel K-Type EGT CAN module uses an integrated cold junction sensor to ensure lab-grade temperature readings across all eight channels. It has the ability to read better than one percent full scale, even at the extreme temperature range (-328 to 2,501 degrees F). The module also includes open circuit/fault detection to notify you if a sensor loses its connection or needs to be replaced. This unit will work with non-AEM devices with configurable CAN bus. The module utilizes flexible CAN configuration jumpers, which allow it to be used with just about any third party devices. Features and benefits include: * Includes 8 K-type thermocouple inputs to accept common K-type thermocouple sensors * Uses common miniature thermocouple sockets * Daisy-chain two modules together for up to 16 temp inputs through a single plug * Outputs all channels via configurable CAN bus via one-plug connection * Cold junction compensated for lab-grade accuracy * Temperate resolution 0.18 degrees F * Integrated open circuit/fault detection
Not Yet Reviewed
$486.95
Stewart Warner replacement senders are used with electrical gauges. They offer senders for electric oil, fuel pressure, and electric temperature gauges. Stewart Warner Performance replacement senders are designed to be used with Stewart Warner Performance gauges.
( 196 )
$5.99
—
$86.99
Use a New Vintage USA speedometer sender to convert your mechanical speedometer takeoff or your electronic sensor-style speedometer output to an electronic pulse output. These speedometer senders are designed for use with custom installations, early model transmission applications, and all Marshall electronic speedometers.
( 15 )
$39.95
—
$109.99
On Sale
These Classic gauge sending units are just what you need to keep your gauges working smoothly and accurately. They are available for temperature and pressure gauges and different thread sizes.
( 41 )
$57.85
$31.82
—
$45.81
The need for speed is often accompanied by a demand for accurate feedback. In fact, a speedometer at times becomes the most important gauge on the dash panel. If your system is malfunctioning or you prefer an upgrade in data precision, Dakota Digital electronic sending units deliver clean, sharp signals from your transmission to the speedometer. Some replacement kits process 8K pulses per mile, and others 16K, for instance--you choose the application and attachment style that's best for your particular vehicle.
( 66 )
$41.80
—
$57.00
Dakota Digital tire pressure monitoring systems will be the finishing touch to your hot rod. These TPMS units are the expansion modules for Dakota Digital HDX instrument systems—and give you real-time pressure readings for all four tires, displayed in your existing message center. The kits include four wireless valve stem sensors that report back to a vehicle-mounted receiver for on-the-fly information. They are easily reprogrammable upon tire rotation or replacement. No more tire kicking! Dakota Digital tire pressure monitoring systems provide the information you need.
Not Yet Reviewed
$489.25
Missing something? Dakota Digital high-frequency pulse generators will complete your performance puzzle! Doing an early GM transmission swap means recreating the high frequency rate that allows your ECM to receive the signals for proper operation. These Dakota Digital pulse generators are direct replacements for the stock GM internal speed sensors with 128,000 pulses per minute. With a standard female 7/8 in. thread-on fitting, they fit all GM transmissions with a mechanical speedometer cable outlet. The removable weathertight 10 ft. cable provides you with simple installation and cable routing. What was lost is now found, thanks to Dakota Digital and their high frequency pulse generators.
( 8 )
$152.00
Classic Instruments Fuel Link interface modules will resolve the differences between your fuel senders and your gauges. Compact in size, these units will work hard to efficiently correct ohm mismatch and erratic movement due to fuel slosh, and thereby making sure the ohm and fuel tank readings you see are accurate. Fuel Link is easily installed under your dash, and can be custom calibrated at a special range between 0-350 ohms. Fuel Link features: * Interface is 3 in. x 2 in. x 1.5 in. size with mounting holes * Calibrated at every 1/4 tank reading to ensure accuracy * Compatible with almost any short sweep fuel gauge and fuel sender combo * Easy screw terminal wire connections * On-board push button with LED readout for calibration * Low fuel light trigger at 1/8 tank--works with LED or incandescent bulb * Eight compatible preset fuel sender ohm ranges
( 15 )
$162.95
More data--not more holes; Dakota Digital compass with outside temperature modules give you direction without having to install another gauge. You don't need to cut holes out, install a column on your pillar, or mount a pod on your dash! Part of their BIM Series of expansion modules, these units provide you with an 8-direction compass, plus the outside air temperature. Updating your ride with information you can use is easy, thanks to Dakota Digital and their BIM Series compass/outside temperature modules.
( 6 )
$123.50
Classic Instruments speedometer GPS antennas are a basic, directional, GPS sending unit with outputting 16000 ppm or 8000ppm. They generate a 12 V square wave speed signal using GPS satellites. Each unit comes with a 2-year warranty.
( 2 )
$168.95
Designed specifically for use with AutoMeter Wideband AFR gauges, these wideband exhaust oxygen sensors are intended for replacement of an existing sensor(s) being utilized by an AutoMeter wideband air/fuel ratio gauge. The sensors are fitted with a laser-etched calibration chip which prevents the need for free-air calibration when used with the AutoMeter gauges for which they are specifically designed. Each sensor is factory-calibrated by Bosch for accuracy within 0.1 AFR.
( 17 )
$150.99
If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some significant drawbacks including the 1/4 tank issues that result in cavitation of the pump when you draw air into the fuel system. To resolve this issue there are Fleece Performance SureFlo performance sending units. SureFlo units are designed to work with aftermarket lift pumps and fit directly into your stock sending unit location. Each one features factory-style quick disconnects to adapt your stock fuel lines at the tank, giving you the cleanest installation available, and requiring no cutting or drilling of the tank. SureFlo works by drawing fuel from, and returning fuel to, the bucket assembly at the base of the unit, ensuring you are always drawing fuel into your pump and not drawing air into the fuel system, as well as eliminating the dreaded 1/4 tank problems. The SureFlo bucket also incorporates one-way check valves to allow fuel to easily flow in at lower levels. Fleece Performance SureFlo performance sending units are a great alternative for trucks originally equipped without an in-tank pump needing to repair a malfunctioning level sender or if you are simply looking to run your own custom fuel lines directly to the tank. Choose the SureFlo unit designed for your Cummins or Duramax fuel system. Features: * New fuel level electronics and fuel float * Heavy-duty billet aluminum cap * Universal -8 AN ports for professionally plumbing a custom fuel setup * New O-ring or flange seal * Adaptation pigtail connector (where applicable)
( 5 )
$359.00
—
$379.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
