Availability
Dakota Digital GPS speed sensor and interface modules are built for the custom automotive market. The highly advanced electronic and software design allows them to work unlike anything else, with accelerometers and predictive software to compensate for the times when GPS inherently struggles: overpasses, mountains, tunnels, heavy tree cover, large buildings, passing large vehicles, etc. Their unique electronic architecture provides for negligible current usage when off, and yet they offer lightning fast start-up and signal acquisition. Updating the speed information 10 times per second offers tremendous accuracy, while their integrated omnidirectional antenna provides for installation flexibility and simplicity. These modules do such a tremendous job of rendering the correct speed information, they can be used to feed an aftermarket cruise control system—and used in conjunction with a Dakota Digital VFD3 or VHX instrument system. A single data connection cable adds accurate speed information, compass positioning, altimeter data, and automatic clock syncing, all with fully automatic calibration. You'll have no DIP switches, no guessing, and no inaccuracies, period! The modules are also fully compatible with other electronic speedometers on the market. Offering a user-selectable output of 4k, 8k, or 16k PPM signals and a selectable signal type of a Sine Wave or Square Wave, the flexibility is endless!
( 41 )
$237.50
Dakota Digital OBD II tachometer/speedometer interfaces are designed to plug directly into the OBDII diagnostic connector, providing a user-adjustable traditional speedometer, tachometer and check engine output for your choice of aftermarket instruments. Features include: * User selectable output of: 4k, 8k, 16k PPM signals, Sine or Square wave options * +/-35% speed signal correction, compensating for tire size or gearing changes * Adjustable 4, 6 or 8 cylinder tachometer signal output * Check engine light output provides a grounded (-) output to activate a check engine light of your choice *Automatically calibrated output for an aftermarket cruise control can be activated by making connection to the higher-resolution fixed VSS sensor
( 12 )
$123.50
American Autowire alternator warning light sending units can be used to trigger an in-dash warning light when the charging systems voltage drops below 11 bolts. This makes it the perfect solution to control a dash indicator light when installing a one-wire alternator, or simple as a piece of mind in addition to a voltmeter. Don't get stuck with a dead system, get warned beforehand with these sending units!
( 4 )
$43.70
TCI speedometer control units are the perfect solution to retrofitting an electronic transmission. These economical adapters pigtail into the electronic speedometer harness and have a connection to power a cable-driven speedometer. They are fully configurable for any tire size and rear gear ratio. Cables made to fit specific transmissions are sold separately.
( 1 )
$597.95
Manufacturer Rebate
AutoMeter Pro-Lite warning light sending units are designed to trigger your warning light at the right time, when you need it the most. If you want to prevent engine damage, AutoMeter has you covered.
( 14 )
$28.99
—
$32.99
On Sale
Replace those old oil pressure sending units with a quality piece from Standard Motor Products. Their replacement oil pressure warning light sending units are designed to meet OEM specifications. You can trust your electrical system when you put it in the hands of Standard Motor Products.
( 34 )
$104.99
$2.99
—
$178.99
Allstar Performance replacement warning light sending units are available for oil, water, and fuel pressure and temperature warning lights. There's a lot to think about when you're behind the wheel of your racer, so make sure that your warning indicator lights are functioning to alert you of problems. Swap out the old for the new with these warning light sending units from Allstar.
( 2 )
$17.99
—
$19.99
Standard Motor T-Series oil pressure warning light sending units are designed to meet the original equipment form, fit, and function. Don't take chances with old, questionable, or faulty OE parts that can leave you stranded. Replace them with new ones from Standard Motor Products.
( 2 )
$3.99
—
$22.99
Are you experiencing sporadic oil pressure readings? Crown Automotive oil pressure sending units can get your oil pressure gauge working accurately again. Replacing the sensor is usually the easiest and cheapest start to troubleshooting oil pressure issues, and Crown offers an extensive line of quality factory-style replacement sensors; many are direct-fit replacements.
( 20 )
$4.50
—
$59.99
Standard Motor temperature warning light sending units provide reliable information to your vehicle's computer, alerting you of possible overheating. Standard Motor replacement temperature warning light senders are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. Trust your vehicle's electrical system needs to Standard Motor for exceptional performance.
( 6 )
$9.99
—
$68.99
Longacre Racing sending units are designed and available for use with several gauge types. They are made from high-quality materials to trigger your warning lights quickly and accurately, helping to prevent engine damage.
( 6 )
$13.50
—
$85.99
Stewart Warner Performance temperature switches are voltage-independent switches with solid brass bodies and gold plated contacts. These switches offer excellent accuracy and repeatability and come in a choice of spade terminal and screw terminal styles.
( 20 )
$48.99
—
$68.99
Do you have a faulty or broken warning light switch? You've put a lot of time, energy, and money into your racer. Don't take chances with your investment--replace that switch with one of these warning light switches from QuickCar! Available for oil pressure, water temperature, and oil temperature gauges, these switches activate the light on the gauge when your car's pressure and temperature control systems get to unsafe levels. So, keep your warning indicator lights functioning properly with QuickCar!
( 12 )
$17.95
—
$18.95
Clearance
VDO offers replacement temperature switches for a wide variety of applications. These fan switch components are direct-fit brass units that help to facilitate proper climate control for your vehicle.
Not Yet Reviewed
$96.99
$38.50
Is your factory low-voltage indicator light no longer working because you installed a one-wire alternator in your classic? If so, then these Ron Francis Wiring low-voltage sensors are just what you need. If your vehicle's voltage falls below 11 V, these low-voltage sensors will illuminate your factory indicator light. These low-voltage sensors also have a built-in LED that will light up in conjunction with your factory light. They are helpful reference tools that can determine if your factory indicator light is functioning properly. Get your classic's low-voltage sensor indicator light working correctly again with these Ron Francis Wiring low-voltage sensors.
( 6 )
$37.19
Moroso replacement oil pressure warning light switches are designed to activate a warning light at or below 15 psi of oil pressure. They feature a standard 1/8 in. NPT male-threaded fitting with a 2-post wire connection. Light and wiring harnesses are not included.
( 1 )
$68.99
These power steering pressure switches from Standard Motor Products detect when the system exceeds power steering load limits and signal the ECM. The ECM then adjusts the idle speed to keep the engine from stalling.
Not Yet Reviewed
$25.99
—
$271.99
Is your ride's fuel gauge on the "level"? If you don't think you're getting the right readings or you're getting no reading Tanks can help fix the miscommunication. Their fuel level sending units are quality units built to send reliable, accurate data to your gauge so you will know exactly where you sit on fuel. Keep the communication honest with Tanks fuel level sensors on board.
( 322 )
$41.99
—
$195.99
Manufacturer Rebate
AutoMeter GPS speedometer interface modules can turn any electronic speedometer into a GPS speedometer with just the push of a button. They offer plug-and-play functionality with any AutoMeter programmable electronic speedometer and simple on-button, 10-second calibration for nearly every other electronic speedometer on the market. They feature IP67 construction and are fully sealed against water and dust. They include a fully sealed and paintable magnetic micro antenna and a lightning-fast 10 Hz sampling rate.
( 47 )
$258.99
Dakota Digital gauge pressure sending units are available for a variety of gauge applications. Each sending unit is made using high-quality materials by the pros at Dakota Digital.
( 22 )
$57.00
—
$156.75
On Sale
Holley Easy Level fuel level senders use LiDAR technology to precisely measure the depth of fuel remaining in your tank and work with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range fuel gauges. They also work with many other gauge brands. Compatible with tanks ranging from 4 to 39 in., setup is a breeze with the on-board buttons. Easily set empty and full tank positions, with reserve, right on your workbench before installing and then set the empty, half, and full positions on the gauge. The desired dampening rate is adjusted with dip switches right on the unit to reduce fuel slosh and gauge bounce by adjusting how fast or slow the gauge reacts to the fuel level change. Upgrade Classic Instruments' gauge sets and other brands to capture the benefits of Laser imaging, Detection, and Ranging (LiDAR) technology with Holley Easy Level senders. This exciting and innovative automotive application replaces vulnerable moving parts with a hi-tech laser. Besides the problems encountered with float setup, hitting baffles or tank wall, Easy Level eliminates having to set up the float-type sender, saving time and effort. Features: * Quickly reads fuel levels with zero contact * Easy installation with no moving parts; popular 5-bolt flange * Long life sensor and no failing floats * Easy to program the level of any tank and electronic gauge * Bolt Circle Diameter (BCD) is 2.122 in. * Output is a PWM signal for 12 V applications (10 to 20 V maximum) * Mounting hardware and rubber gasket * Maximum operating temperature of 185 degrees Note: Does not work with OE-style gauges that utilize an ohm only input
( 5 )
$124.95
$112.45
Summit Racing™ GPS speedometer sending units are designed to work with electronic speedometers to provide accurate readings. They require no additional sensor from the transmission to operate the speedometer. These sending units work with most aftermarket speedometers that accept an industry standard 4,000, 8,000, or 16,000 pulses per mile signal, or with any programmable speedometer. The senders include a GPS receiver and a microprocessor with LED status indicator.
( 19 )
$111.99
Tanks Inc. MeterMatch fuel gauge interface modules will allow you to convert any ohm range fuel level sender to work with any ohm range fuel gauge. No longer do you need to drop your tank to change or customize your sender, or re-calibrate your fuel gauge. With Tanks Inc. MeterMatch device you can ensure that your gauges are accurately reading your fuel sender and more! Features include: * User can calibrate a custom ohm range (between 0 to 3,000 ohms) * Interface is compatible with nearly any short sweep fuel gauge and fuel sender combination * Module allows gauge calibration at empty, full, and two other points ensuring accurate readings—even with odd shaped gas tanks * Module allows for low and/or high set points that can trigger a blinking LED indicator to alert if gauge exceeds normal values * Screw terminal wire connections * Compact size ( 2.4 in. x 1.85 in. x 0.93 in.) * Simple rotary knob and push button calibration * Programmable voltage correction * Programmable low (or high) alarm (works with a LED indicator) * Programmable averaging can be turned on or off to help minimize needle bouncing * Gauges not included (sold separately from MatchMeter device)
( 24 )
$89.99
These Stewart Warner Performance gauge sending units ensure that you get fast, accurate information from your Stewart Warner gauges. A variety of sending units is available for use with Stewart Warner temperature, pressure, fuel level, and speedometer gauges.
( 74 )
$11.99
—
$93.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
