Availability
Showing In Stock Items. Show All 35 Items.
Manufacturer Rebate
AutoMeter offers these replacement probe kits for use with their gauges. They include the probe, wire, and necessary fittings.
( 4 )
$74.99
—
$169.99
Manufacturer Rebate
AutoMeter replacement senders are used with electrical gauges. The sending units are offered for more than a dozen gauge functions, including fuel, oil, water, boost, brake, oxygen, and nitrous data. They're available in different thread sizes, and some include adapter fittings.
( 231 )
$18.99
—
$170.99
Missing something? Dakota Digital high-frequency pulse generators will complete your performance puzzle! Doing an early GM transmission swap means recreating the high frequency rate that allows your ECM to receive the signals for proper operation. These Dakota Digital pulse generators are direct replacements for the stock GM internal speed sensors with 128,000 pulses per minute. With a standard female 7/8 in. thread-on fitting, they fit all GM transmissions with a mechanical speedometer cable outlet. The removable weathertight 10 ft. cable provides you with simple installation and cable routing. What was lost is now found, thanks to Dakota Digital and their high frequency pulse generators.
( 8 )
$152.00
On Sale
AEM Electronics EGT thermocouples are economical and fast responding K-type thermocouples. They include a closed-tip TC sensor with a protective inconel sheath, 10 ft. extension wire, 1/8 in. NPT compression fitting, and ring and terminal harness. AEM EGT thermocouples are available individually or in 2- or 4-packs. Specs: * Maximum temperature: 1800 degrees F (982.2 degrees C) * Sheath length: 3 in./76.2mm * Sheath diameter: 0.125 in./3.18mm * Termination: Ring terminals * Wire length: 12 in. * Accuracy: Greater of 3.96 degrees F/2.2 degrees C or 0.75 percent
Not Yet Reviewed
$117.95
—
$420.95
$64.95
—
$377.95
Manufacturer Rebate
AutoMeter narrowband oxygen sensors are intended for use only with AutoMeter narrowband air fuel ratio gauges in applications not already fitted with a compatible factory equipped sensor. These sensor kits include sensor, 8 ft. wire harness, grommet, protective PVC tubing, stainless steel weld fitting, and plug.
( 2 )
$131.99
Moroso replacement oil pressure warning light switches are designed to activate a warning light at or below 15 psi of oil pressure. They feature a standard 1/8 in. NPT male-threaded fitting with a 2-post wire connection. Light and wiring harnesses are not included.
( 1 )
$68.99
These Stewart Warner Performance gauge sending units ensure that you get fast, accurate information from your Stewart Warner gauges. A variety of sending units is available for use with Stewart Warner temperature, pressure, fuel level, and speedometer gauges.
( 74 )
$61.99
—
$93.99
Stewart Warner replacement senders are used with electrical gauges. They offer senders for electric oil, fuel pressure, and electric temperature gauges. Stewart Warner Performance replacement senders are designed to be used with Stewart Warner Performance gauges.
( 196 )
$31.99
—
$88.99
On Sale
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$199.95
$78.45
—
$199.95
If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some significant drawbacks including the 1/4 tank issues that result in cavitation of the pump when you draw air into the fuel system. To resolve this issue there are Fleece Performance SureFlo performance sending units. SureFlo units are designed to work with aftermarket lift pumps and fit directly into your stock sending unit location. Each one features factory-style quick disconnects to adapt your stock fuel lines at the tank, giving you the cleanest installation available, and requiring no cutting or drilling of the tank. SureFlo works by drawing fuel from, and returning fuel to, the bucket assembly at the base of the unit, ensuring you are always drawing fuel into your pump and not drawing air into the fuel system, as well as eliminating the dreaded 1/4 tank problems. The SureFlo bucket also incorporates one-way check valves to allow fuel to easily flow in at lower levels. Fleece Performance SureFlo performance sending units are a great alternative for trucks originally equipped without an in-tank pump needing to repair a malfunctioning level sender or if you are simply looking to run your own custom fuel lines directly to the tank. Choose the SureFlo unit designed for your Cummins or Duramax fuel system. Features: * New fuel level electronics and fuel float * Heavy-duty billet aluminum cap * Universal -8 AN ports for professionally plumbing a custom fuel setup * New O-ring or flange seal * Adaptation pigtail connector (where applicable)
( 5 )
$359.00
Use these Stewart Warner senders to convert your mechanical speedometer takeoff or electronic sensor-style speedometer output to an electronic pulse output. They are designed for use with custom installations, early model transmission applications, and all Stewart Warner electronic speedometers and tachometers. One sender can operate two tachometers or two speedometers. Max rpm is 3,500.
( 5 )
$184.99
—
$199.99
Intellitronix gauge sending units are designed to replace missing, damaged, or not working gauge sending unit. They are available for different styles and gauge readings to fit your specific gauge range. All Intellitronix products include a lifetime warranty.
( 23 )
$29.43
FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners
Not Yet Reviewed
$89.00
These sending units are designed to work with your Dakota Digital gauges. Available for a variety of applications, Dakota sending units ensure that the correct information is sent from your automotive systems to your gauges for proper readouts .
( 92 )
$33.25
—
$90.25
Use Summit Racing™ digital gauge sending units for Summit Racing™ digital gauges to get precise, accurate readings at a glance. They are available in several styles to suit your automotive needs.
( 34 )
$18.99
Since different manufacturers use different ohm ranges on their gauges and senders, why not purchase the corresponding VDO pressure sender for your VDO gauge? VDO produces these top-quality sending units for use with all of their electrical gauges to ensure accurate readings and a long life.
( 101 )
$59.99
On Sale
AEM Electronics offers high-quality stainless steel PSIa sensor kits in 15 (1 BAR), 30 (2 BAR), 50 (3.5 BAR), 75 (5 BAR) and 100 (7 BAR). PSIa is referenced to absolute zero—the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 psi when the sensing element is exposed to atmospheric pressure at sea level; however, they can be recalibrated to read zero at atmospheric, and a negative number at values less than atmospheric pressure.
Not Yet Reviewed
$184.95
$166.45
Manufacturer Rebate
AutoMeter pyrometer thermocouples are type "K" sensors with a stainless probe and 10 in. wire encased in wire braid for heat protection. Use them with your Spek-Pro pyrometer (EGT) gauges and AutoMeter water/methanol injection controller Stage 3 kits. Get accurate exhaust temperature readings with an AutoMeter pyrometer thermocouple.
( 2 )
$62.99
VDO produces senders that are compatible with its programmable speedometers for most popular domestic applications. They even offer special senders for cruise control applications with a through-drive.
( 22 )
$72.99
Failure to use the proper sending unit with your gauge can cause inaccurate and unreliable readings. VDO temperature senders are matched to their gauges for accurate and reliable readings every time.
( 93 )
$32.99
—
$69.99
Manufacturer Rebate
These AutoMeter replacement stepper motor wiring harnesses are designed to fit your existing stepper motor box and install without any modifications. They include preterminated ends for a simple, direct plug-in installation.
( 6 )
$24.99
These Summit Racing™ replacement analog gauge sending units provide precise, accurate readings at a glance. They are available in several styles and ranges to fit your specific needs.
( 8 )
$24.99
Longacre Racing sending units are designed and available for use with several gauge types. They are made from high-quality materials to trigger your warning lights quickly and accurately, helping to prevent engine damage.
( 6 )
$35.99
—
$38.99
Manufacturer Rebate
Forget all the gear changing and cables to get the correct mph reading—there's a better way! AutoMeter universal speed sensors deliver a 12 V square wave signal to your electric speedometer. These sending units come with a mounting strap that can be shaped into whatever position is needed for most axle and driveshaft applications. They're available in universal and vehicle make-specific models.
( 6 )
$105.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
