Availability
Showing In Stock Items. Show All 27 Items.
VDO fuel tank sender gaskets are constructed from quality neoprene material to ensure maximum reliability. These replacement seals feature a 2 1/8 in. bolt circle pattern (54mm) design. They're an excellent choice for swapping worn-out gaskets on your VDO steel-constructed fuel sender unit and ensuring a good, tight seal against leaks.
( 5 )
$5.99
Is your ride's fuel gauge on the "level"? If you don't think you're getting the right readings or you're getting no reading Tanks can help fix the miscommunication. Their fuel level sending units are quality units built to send reliable, accurate data to your gauge so you will know exactly where you sit on fuel. Keep the communication honest with Tanks fuel level sensors on board.
( 323 )
$41.99
—
$42.99
On Sale
Holley aluminum fuel cells come in a several variations for nearly every race application, and Holley's fuel gauge sending units are the correct replacements to restore consistent level readings. Offered in an 8 or 9 in. depth for 5- and 10-gallon or 15- and 20-gallon fuel cells respectively, both styles have a tube design that acts as a damper, saves space, and eliminates the need for a float arm. They are 0 to 90 ohms (empty-full) to work with most aftermarket gauges, have a standard SAE 5-bolt mounting pattern, and include gasket and mounting hardware. Holley fuel gauge sending units are E85 compatible. Choose the best fit for your fuel cell.
( 1 )
$68.25
$44.36
—
$61.45
A good seal is essential for fuel tank safety. Tanks Inc. fuel sender gaskets ensure a secure seal to prevent fuel leaking from the connection between the sending unit and the tank. These replacements are available in a variety of materials, such as cork, rubber, and neoprene for fitment on numerous applications. Inspect your gaskets regularly and, as needed, swap them out with fresh seals from Tanks Inc.
( 28 )
$6.99
—
$7.99
These Stewart Warner Performance gauge sending units ensure that you get fast, accurate information from your Stewart Warner gauges. A variety of sending units is available for use with Stewart Warner temperature, pressure, fuel level, and speedometer gauges.
( 78 )
$42.99
Radium Engineering fuel level sending units feature full stainless steel sealed construction with magnetic float. They are easy to install using the supplied hardware and Deutsch connectors (gauge not included). Units are offered in models for compatibility with Radium 6-gallon, 10-gallon, and 15-gallon fuel cell surge tanks. Order the model for your application. Features: * Suitable for use with gasoline, diesel, water, and all alcohol-based fuels including methanol, ethanol, E85, etc. * All level senders are 0 ohms empty to 90 ohms full, common with many OEM gauges (Radium engineering does not sell fuel level gauges) * Fuel level sensor uses the standard SAE 5-bolt mounting pattern, extensively used with the Radium Fuel Cell Surge Tank (sold separately) * To test the sender, measure the resistance between the two wires while tipping the sender to allow the float to move Each level sender includes the following: * Level Sensing Probe * SAE 5-bolt gasket * Stainless bolts * Deutsch DT 2P connector * Deutsch DT sockets
Not Yet Reviewed
$94.95
Tanks Inc. fuel tank sending unit mounting plates in a 5-bolt SAE pattern are available in mild steel or stainless steel—and it's important to use the same alloy for the sending unit plate as you used for the tank. Tanks Inc. is an industry leader and has the expertise to help you with your fuel system needs.
( 4 )
$12.99
—
$16.99
Tanks Inc. fuel level sending unit floats are a component that rises and falls with the fuel level, transferring this position to a variable resistor. This movement, via a connected rod, alters the electrical resistance to send a signal to the fuel gauge, which translates it into a visible fuel level reading. These replacement float arms are for Tanks' universal 5-bolt senders. The rod is 17 in. long, connected to a round ball or square black foam type float.
( 1 )
$11.99
Restore accuracy to your fuel readings with a Crown Automotive fuel sending unit. A major part of fuel delivery systems are the sending units. They monitor the fuel level and send the information to your dash gauge for a visual warning. Crown offers quality units to fit many applications, from vintage to classic Jeeps. Still wondering how much gas is really in your tank? Replace guesswork with dependable answers from Crown Automotive fuel sending units.
( 6 )
$39.99
Tanks Inc. fuel tank sending unit block-off plates are used when converting aftermarket tanks that have the sending unit hole cut out, for models that didn't originally have a gauge. They are also used for any custom applications where you want to delete or move the sending unit hole without having to weld the hole on the tank closed.
Not Yet Reviewed
$8.99
On Sale
Holley Easy Level fuel level senders use LiDAR technology to precisely measure the depth of fuel remaining in your tank and work with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range fuel gauges. They also work with many other gauge brands. Compatible with tanks ranging from 4 to 39 in., setup is a breeze with the on-board buttons. Easily set empty and full tank positions, with reserve, right on your workbench before installing and then set the empty, half, and full positions on the gauge. The desired dampening rate is adjusted with dip switches right on the unit to reduce fuel slosh and gauge bounce by adjusting how fast or slow the gauge reacts to the fuel level change. Upgrade Classic Instruments' gauge sets and other brands to capture the benefits of Laser imaging, Detection, and Ranging (LiDAR) technology with Holley Easy Level senders. This exciting and innovative automotive application replaces vulnerable moving parts with a hi-tech laser. Besides the problems encountered with float setup, hitting baffles or tank wall, Easy Level eliminates having to set up the float-type sender, saving time and effort. Features: * Quickly reads fuel levels with zero contact * Easy installation with no moving parts; popular 5-bolt flange * Long life sensor and no failing floats * Easy to program the level of any tank and electronic gauge * Bolt Circle Diameter (BCD) is 2.122 in. * Output is a PWM signal for 12 V applications (10 to 20 V maximum) * Mounting hardware and rubber gasket * Maximum operating temperature of 185 degrees Note: Does not work with OE-style gauges that utilize an ohm only input
( 5 )
$124.95
$112.45
American Autowire alternator warning light sending units can be used to trigger an in-dash warning light when the charging systems voltage drops below 11 bolts. This makes it the perfect solution to control a dash indicator light when installing a one-wire alternator, or simple as a piece of mind in addition to a voltmeter. Don't get stuck with a dead system, get warned beforehand with these sending units!
( 5 )
$43.70
Eddie Marine fuel level senders are accurate. They have no moving parts to wear out or cause inaccuracies. They utilize the same 5-hole SAE bolt pattern and resistance (240-33 ohms) as marine float-type senders. Offered in three lengths, they may be cut to desired length and calibrated for your specific tank. Eddie Marine fuel level senders eliminates excessive needle bounce and are user-adjustable.
( 1 )
$179.00
Tanks Inc. reed switch fuel level senders provide level information via a series of reed switches positioned inside of the sealed level tube, while an external float with built-in magnets trigger the reed relays to generate an ohm resistance value. With no moving mechanical parts other than the float, Tanks' reed switch fuel level senders are extremely durable and reliable, and they provide flexibility of installation, even in tanks with baffles while reducing slosh fluctuation. They are available for standard aftermarket, VDO, GM, and early Ford and Mopar gauges. Select the reed switch sending unit designed for your gauges. Additional features: * SAE 5-bolt mounting pattern * Full 304 stainless steel construction * Durable NBR float * Compatible with gas, diesel, hydraulic fluids, black water, and grey water * Gasket and mounting screws are included
( 4 )
$52.99
—
$57.99
On Sale
Classic Instruments lever-type fuel senders are designed to operate correctly with any classic fuel level gauge. These units can easily adjust from tank depths of 6 in. to 24 in. with a standard 5-bolt mounting pattern.
( 24 )
$57.85
$37.60
—
$57.85
Restore proper fuel level gauge readings with Dorman fuel level sending units. All units include the necessary hardware for a bolt-off/on solution. They feature corrosion-resistant, leak-resistant, and durable construction for long-lasting use. Choose the proper one for your vehicle's fuel system.
( 21 )
$31.99
—
$111.95
Specifically designed for fuel tanks without mounting holes, VDO fuel tank sender installation kits allow you to mount a sender in the tank where you want it. The kits include a flange, gasket, and all necessary mounting hardware. These replacement mounting flanges are available in common 5-bolt patterns to fit your application.
( 1 )
$25.99
ATL capacitance-type micro controller fuel level sending units can be installed on most fuel cells and are available in 2- and 3-terminal units. Compatible with race gas, diesel and E10 fuels only, these capacitive-style senders/probes are self-calibrating, can be cut to length, 12 V, negative ground, and have a standard SAE 5-bolt pattern. Choose the proper length and ohm range for your fueling system. Notes: * 2-terminal senders—use if electric power comes from gauge * 3-terminal senders—use if electric power comes from ignition switch
Not Yet Reviewed
$323.99
Tanks Inc. fuel tank sending unit adapters convert a standard 5-hole sender to an early-style, 6-hole collar. They are manufactured from durable aluminum and include the gasket for secure mounting.
( 3 )
$30.99
Prevent fuel contamination and leaks with Crown Automotive fuel tank sending unit gaskets. These crucial gaskets are required to avoid dangerous fuel leaks. Old gaskets can deteriorate over time. These replacements are available in a variety of sizes, materials, and configurations for precise fitment on specific applications. For safety and fuel efficiency, check your gaskets regularly and, when needed, replace them with factory-style Jeep products from Crown.
( 17 )
$2.99
—
$5.99
RCI fuel cell sending units are a perfect fit. They work with 0-90 ohm reading gauges. RCI offers them for fuel cells with or without safety foam.
( 22 )
$34.99
Constructed from high-quality materials for reliability, these Summit Racing™ fuel level senders fit several types of gauges, including most aftermarket and OEM gauges.
( 49 )
$177.99
—
$195.99
Classic Instruments fuel level sender flanges feature a machined aluminum adapter plate that allows you to acclimate early model tanks to the now-standard aftermarket 5-hole pattern. Update your classic ride with a Classic Instruments fuel level sender flange.
( 6 )
$44.67
Manufacturer Rebate
AutoMeter fuel tank sending unit adapters are designed to convert a standard 5-hole sender to an early-style, 6-hole collar. They are manufactured from durable aluminum and include the gasket for secure mounting.
( 10 )
$44.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
