Selected Filters


Loading...

Availability


60 Results Found For "air"

Part Groups

Results 1 - 24 of 60

Dakota Digital Wideband Air/Fuel Modules

Dakota Digital BIM Series gives you more info without more gauges. Their wideband air/fuel modules are easy to install--no cutting holes or installing pillars or pods. They allow you to display the reading from almost any aftermarket wide band controller system and are user-programmable to display in either air/fuel ratio or lambda. Get additional gauge information without the gauge, thanks to Dakota Digital BIM wideband air/fuel modules.

2.0 out of 5 stars ( 2 )

$123.50

Dakota Digital Quad Air Pressure Modules

Dakota Digital quad air pressure modules allow you to monitor two to four bag pressures on your air ride system. Choose between a 4-corner, left and right or front and rear pressure system. Tank pressure reading is also available. Dakota's BIM-19-2 modules supply this information to the RTX, HDX, VHX and VFD3 systems.

Not Yet Reviewed

$123.50

Dakota Digital Pressure Modules

Dakota Digital pressure modules allow you to display an additional pressure reading within your RTX, HDX, VHX, and VFD3 (rev G) gauges. These BIM-03-2 modules are designed for Solid State pressure senders, providing you phenomenal accuracy. Pressure inputs: * Pressure (generic fluid or air) * Fuel pressure * Air pressure * Boost/vacuum * NOS pressure

4.8 out of 5 stars ( 5 )

$90.25

RideTech RidePro Digital Sending Units

Do you need a replacement pressure switch? RideTech RidePro digital sending units provide precision and accuracy to keep your air suspension performance at its best.

5.0 out of 5 stars ( 5 )

$50.00

Innovate Pressure Sensors

Innovate offers high-quality pressure sensors to provide needed data regarding air, fuel, oil, water, or transmission pressure gauges. These replacement units will work with any Innovate air or fluid pressure gauge or sensor interface.

Not Yet Reviewed

$96.99

$147.99

Stewart Warner Performance Gauge Sending Units

These Stewart Warner Performance gauge sending units ensure that you get fast, accurate information from your Stewart Warner gauges. A variety of sending units is available for use with Stewart Warner temperature, pressure, fuel level, and speedometer gauges.

4.44 out of 5 stars ( 78 )

$87.99

Dakota Digital Gauge Pressure Sending Units

Dakota Digital gauge pressure sending units are available for a variety of gauge applications. Each sending unit is made using high-quality materials by the pros at Dakota Digital.

4.79 out of 5 stars ( 24 )

$57.00

$156.75

AutoMeter Narrowband Oxygen Sensors

AutoMeter narrowband oxygen sensors are intended for use only with AutoMeter narrowband air fuel ratio gauges in applications not already fitted with a compatible factory equipped sensor. These sensor kits include sensor, 8 ft. wire harness, grommet, protective PVC tubing, stainless steel weld fitting, and plug.

5.0 out of 5 stars ( 2 )

$149.99

Dakota Digital Sending Units

These sending units are designed to work with your Dakota Digital gauges. Available for a variety of applications, Dakota sending units ensure that the correct information is sent from your automotive systems to your gauges for proper readouts .

4.74 out of 5 stars ( 93 )

$23.75

$156.75

FAST XFI Sending Units

FAST offers optional sending units for use with your XFI, XFI 2.0 or XFI Sporstman fuel injection system. Choose from fuel and oil pressure units or single-pressure units with harnesses available to work with different pounds per square inch of pressure. Add options to your XFI engine management system with FAST sending units.

4.0 out of 5 stars ( 3 )

$240.95

On Sale

AEM Electronics PSIG Sensor Kits

AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included

4.5 out of 5 stars ( 18 )

$204.95


$80.42

$204.95

Dakota Digital Compass with Outside Temperature Modules

More data--not more holes; Dakota Digital compass with outside temperature modules give you direction without having to install another gauge. You don't need to cut holes out, install a column on your pillar, or mount a pod on your dash! Part of their BIM Series of expansion modules, these units provide you with an 8-direction compass, plus the outside air temperature. Updating your ride with information you can use is easy, thanks to Dakota Digital and their BIM Series compass/outside temperature modules.

4.83 out of 5 stars ( 6 )

$123.50

Fleece Performance SureFlo Performance Sending Units

If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some significant drawbacks including the 1/4 tank issues that result in cavitation of the pump when you draw air into the fuel system. To resolve this issue there are Fleece Performance SureFlo performance sending units. SureFlo units are designed to work with aftermarket lift pumps and fit directly into your stock sending unit location. Each one features factory-style quick disconnects to adapt your stock fuel lines at the tank, giving you the cleanest installation available, and requiring no cutting or drilling of the tank. SureFlo works by drawing fuel from, and returning fuel to, the bucket assembly at the base of the unit, ensuring you are always drawing fuel into your pump and not drawing air into the fuel system, as well as eliminating the dreaded 1/4 tank problems. The SureFlo bucket also incorporates one-way check valves to allow fuel to easily flow in at lower levels. Fleece Performance SureFlo performance sending units are a great alternative for trucks originally equipped without an in-tank pump needing to repair a malfunctioning level sender or if you are simply looking to run your own custom fuel lines directly to the tank. Choose the SureFlo unit designed for your Cummins or Duramax fuel system. Features: * New fuel level electronics and fuel float * Heavy-duty billet aluminum cap * Universal -8 AN ports for professionally plumbing a custom fuel setup * New O-ring or flange seal * Adaptation pigtail connector (where applicable)

4.33 out of 5 stars ( 6 )

$379.00

AutoMeter Wideband Oxygen Sensors

Designed specifically for use with AutoMeter Wideband AFR gauges, these wideband exhaust oxygen sensors are intended for replacement of an existing sensor(s) being utilized by an AutoMeter wideband air/fuel ratio gauge. The sensors are fitted with a laser-etched calibration chip which prevents the need for free-air calibration when used with the AutoMeter gauges for which they are specifically designed. Each sensor is factory-calibrated by Bosch for accuracy within 0.1 AFR.

4.59 out of 5 stars ( 17 )

$133.99

On Sale

Edge EAS Pressure Sensors

Edge EAS pressure sensors come equipped with the proper wires and connectors to plug right into the Universal Sensor Input system. This will save you time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Edge Accessory System pressure sensors can be used to monitor boost psi, fuel rail pressure, air bag pressure, lift pump pressure, pre and post intercooler pressure, and much more.

2.0 out of 5 stars ( 1 )

$212.95


$191.65

Altronics O2 Alert System EGT Thermocouples

Altronics O2 alert system EGT thermocouples are designed to help record air/fuel ratios when placed in your exhaust pipe.

Not Yet Reviewed

$99.99

Summit Racing™ Restoration Fuel Sending Units

Summit Racing™ offers restoration fuel sending units for a wide range of Chevrolet Cars , Trucks and GMC trucks from the 1940s, '50s, '60s, and '70s. These are exact reproductions of the originals, guaranteed to deliver accurate readings to your dash panel fuel gauge. "Running on empty" may be a good song title, but it's not what any driver wants on the road or the track. Always know what's in the tank; order the fuel level sending unit replacement recommended for your vehicle.

4.67 out of 5 stars ( 78 )

$47.99

$53.99

Tanks Inc. Fuel Level Sending Units

Is your ride's fuel gauge on the "level"? If you don't think you're getting the right readings or you're getting no reading Tanks can help fix the miscommunication. Their fuel level sending units are quality units built to send reliable, accurate data to your gauge so you will know exactly where you sit on fuel. Keep the communication honest with Tanks fuel level sensors on board.

4.35 out of 5 stars ( 330 )

$51.99

$174.99

OER Authorized Fuel Sender Lock Rings with Gasket

Install the sending unit on your vehicle with OER Authorized fuel sender lock rings with gasket sets. These reproduction replacements provide an original fit for leak-free performance. The lock rings are manufactured from zinc coated steel for corrosion resistance and include a rubber O-ring gasket. OER Authorized products meet or exceed stringent OER quality control standards and are sanctioned and approved by OER providing.

4.67 out of 5 stars ( 3 )

$12.99

Tanks Inc. Fuel Filler Neck O-Rings

Tanks Inc. fuel filler neck O-rings are made to keep the fuel system on your vehicle properly sealed and free from dirt and debris. The O-rings fit around the outside of the vehicle's filler neck, and presses into the tank for a good tight seal, locking filler neck into place. These Tanks Inc. fuel filler neck O-rings are made from a high-quality material to provide long-lasting service.

5.0 out of 5 stars ( 6 )

$4.99

Standard Motor Oil Pressure Warning Light Sending Units

Replace those old oil pressure sending units with a quality piece from Standard Motor Products. Their replacement oil pressure warning light sending units are designed to meet OEM specifications. You can trust your electrical system when you put it in the hands of Standard Motor Products.

4.44 out of 5 stars ( 34 )

$10.99

$11.99

American Autowire Temperature Sending Units

American Autowire temperature sending units provide accurate, reliable data for optimal vehicle performance. Neither running too hot or too cold is good; keep your ride's operating temperatures "just right" with a new sending unit from American Autowire.

5.0 out of 5 stars ( 1 )

$25.65

OER Fuel Tank Sending Units

When your fuel gauge is sending you mixed signals, it's time for some updated instrumentation. OER offers a wide range of fuel tank sending units to replace your faulty original. They're available in dozens of size and configurations for vehicles from the 1940s and up. The sending units come with all necessary hardware for a complete installation. Order the model recommended for your application.

4.5 out of 5 stars ( 64 )

$50.79

$54.99

The Right Stuff Fuel Tank Sending Units

Are you tired of having the wrong fuel level reading or no reading at all? The Right Stuff has stock-type OEM fuel sending units for a wide variety of applications. They manufacture these fuel sending units from quality stainless steel to ensure performance and reliability. Rubber seals and filter elements are included.

4.17 out of 5 stars ( 155 )

$59.99

$70.99