Availability
Showing In Stock Items. Show All 38 Items.
American Autowire temperature sending units provide accurate, reliable data for optimal vehicle performance. Neither running too hot or too cold is good; keep your ride's operating temperatures "just right" with a new sending unit from American Autowire.
( 1 )
$25.65
Know when your oil pressure is dangerously low with Beck/Arnley switches. Their quality replacements offer the fit and the function that you need to replace malfunctioning switches. If your warning light is on, but a physical check shows that you have plenty of oil, it could be that your oil pressure switch is bad. Don't risk engine damage--replace it with Beck/Arnley reliable OE-specified engine oil pressure switches.
( 4 )
$37.99
A malfunctioning gas tank sending unit can be annoying at best, and leave you stranded at worst! Ensure that your fuel level readings are accurate by replacing a faulty component with one of these Auto Metal Direct fuel tank sending units. They're designed to meet or exceed OE specifications, and are made to fit and function just like the factory originals. Be confident in your fuel level readings with Auto Metal Direct gas tank sending units!
( 45 )
$37.99
—
$87.99
Summit Bucks
When it comes to replacing critical electronic equipment for your vehicle, like oil pressure sending units, don't trust aftermarket suppliers to get it right—rely on the ACDelco line of electronics. They offer various sensors, relays, and switches built to match factory parts in fit, form, and function. These oil pressure sending units will work with your vehicle's ECM to provide optimal performance. They're available in a variety of styles for fitment on vehicles from the 1960s and up. Order the model recommended for your application.
( 17 )
$36.99
—
$73.99
Improved Racing's C5 Corvette oil temperature sensors function identically to the factory sensors, but uses the more common 1/8 in. NPT threads and features an extended wire harness for convenience. The factory C5 Corvette oil temp sensors utilize M12 threads, which are not compatible with most aftermarket oil cooler adapters and sensor blocks. These custom units feature the same resistance curve as the factory units for accurate temperature readings with the factory gauges, but are compatible with any oil cooler adapter or sensor block that accepts an 1/8 in. NPT sensor. If you are installing an oil cooler on your C5 Corvette, this is the sensor to use!
( 2 )
$29.00
On Sale
Scott Drake temperature sending units are for use as direct replacements for the factory units. These sensors are made from high-quality materials to original specifications to ensure proper fit and function.
( 4 )
$10.65
$9.59
—
$11.71
Is your factory low-voltage indicator light no longer working because you installed a one-wire alternator in your classic? If so, then these Ron Francis Wiring low-voltage sensors are just what you need. If your vehicle's voltage falls below 11 V, these low-voltage sensors will illuminate your factory indicator light. These low-voltage sensors also have a built-in LED that will light up in conjunction with your factory light. They are helpful reference tools that can determine if your factory indicator light is functioning properly. Get your classic's low-voltage sensor indicator light working correctly again with these Ron Francis Wiring low-voltage sensors.
( 6 )
$37.19
Classic Performance offers gas tank sending units designed for use with their aluminum, zinc painted, and stainless steel bed-mounted relocation gas tanks. Classic also provides stock-type sending units for factory tanks with stock fuel gauges. Choose the model and options best suited for your application.
( 5 )
$44.99
—
$128.99
OMIX-ADA is your go-to source for fuel tank sending unit replacement parts. These components are direct fit replacements for your factory fuel tank sending units.
( 41 )
$5.99
Manufacturer Rebate
AutoMeter narrowband oxygen sensors are intended for use only with AutoMeter narrowband air fuel ratio gauges in applications not already fitted with a compatible factory equipped sensor. These sensor kits include sensor, 8 ft. wire harness, grommet, protective PVC tubing, stainless steel weld fitting, and plug.
( 2 )
$131.99
Keep your fuel tank sending unit sealed properly with OMIX-ADA fuel tank sending unit gaskets. They are made from thick material and are built to fit the factory fuel tank and sending unit.
( 3 )
$1.99
—
$2.99
Bob Drake offers a variety of fuel tank sending unit replacement components for Ford cars and trucks from the 1930s, '40s, and '50s—including gaskets and brass floats. Each part is made to factory specs to help ensure accurate fuel gauge readings.
( 1 )
$5.99
Crown Automotive water temperature sending units are for use as direct replacements for the factory units. These sensors are made from high-quality materials to original specifications to ensure proper fit and function.
( 1 )
$13.99
—
$14.99
Replace your worn-out or broken oil pressure sending units. OMIX-ADA oil pressure sending units are direct replacements available for a range of applications. These units are direct-replacement factory originals, ensuring proper fit and function.
Not Yet Reviewed
$7.99
Cummins by Mopar replacement fuel transfer pump gaskets are designed to replace your factory seals. They're made from a composite material to protect against leaks—and are available in a variety of shapes and sizes to provide the proper fit, form, and function. Order the Cummins by Mopar fuel pump gaskets designed to fit your application.
Not Yet Reviewed
$23.99
On Sale
If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some significant drawbacks including the 1/4 tank issues that result in cavitation of the pump when you draw air into the fuel system. To resolve this issue there are Fleece Performance SureFlo performance sending units. SureFlo units are designed to work with aftermarket lift pumps and fit directly into your stock sending unit location. Each one features factory-style quick disconnects to adapt your stock fuel lines at the tank, giving you the cleanest installation available, and requiring no cutting or drilling of the tank. SureFlo works by drawing fuel from, and returning fuel to, the bucket assembly at the base of the unit, ensuring you are always drawing fuel into your pump and not drawing air into the fuel system, as well as eliminating the dreaded 1/4 tank problems. The SureFlo bucket also incorporates one-way check valves to allow fuel to easily flow in at lower levels. Fleece Performance SureFlo performance sending units are a great alternative for trucks originally equipped without an in-tank pump needing to repair a malfunctioning level sender or if you are simply looking to run your own custom fuel lines directly to the tank. Choose the SureFlo unit designed for your Cummins or Duramax fuel system. Features: * New fuel level electronics and fuel float * Heavy-duty billet aluminum cap * Universal -8 AN ports for professionally plumbing a custom fuel setup * New O-ring or flange seal * Adaptation pigtail connector (where applicable)
( 5 )
$359.00
—
$379.00
$305.15
—
$322.15
Manufacturer Rebate
Designed specifically for use with AutoMeter Wideband AFR gauges, these wideband exhaust oxygen sensors are intended for replacement of an existing sensor(s) being utilized by an AutoMeter wideband air/fuel ratio gauge. The sensors are fitted with a laser-etched calibration chip which prevents the need for free-air calibration when used with the AutoMeter gauges for which they are specifically designed. Each sensor is factory-calibrated by Bosch for accuracy within 0.1 AFR.
( 17 )
$136.99
Chevrolet Performance oil pressure sending units are designed to work with the LS7 motors. They furnish important data to your dash panel gauge. These factory-recommended replacements will fit dozens of applications from Chevy, GMC, Cadillac, and Pontiac.
Not Yet Reviewed
$132.99
Are you experiencing sporadic oil pressure readings? Crown Automotive oil pressure sending units can get your oil pressure gauge working accurately again. Replacing the sensor is usually the easiest and cheapest start to troubleshooting oil pressure issues, and Crown offers an extensive line of quality factory-style replacement sensors; many are direct-fit replacements.
( 20 )
$4.50
—
$59.99
Summit Bucks
ACDelco offers GM Genuine Parts engine oil pressure sensors for a wide range of vehicles. These are factory-style replacements designed, engineered, and tested to rigorous standards. They are the true OE parts installed during the production of (or validated for) General Motors cars and trucks. A faulty oil pressure sensor can trigger an inaccurate oil reading, a check engine light, flashing oil light, or a vehicle that won't start. Order the replacement sensor recommended for your application.
Not Yet Reviewed
$28.99
Prevent fuel contamination and leaks with Crown Automotive fuel tank sending unit gaskets. These crucial gaskets are required to avoid dangerous fuel leaks. Old gaskets can deteriorate over time. These replacements are available in a variety of sizes, materials, and configurations for precise fitment on specific applications. For safety and fuel efficiency, check your gaskets regularly and, when needed, replace them with factory-style Jeep products from Crown.
( 17 )
$2.99
—
$9.99
Seal the top of your factory-style gas tank with one of these OER Authorized gas tank sending unit gaskets. They are made from quality materials and will provide a tight seal where your sending unit goes into the gas tank.
( 5 )
$6.99
Keeping your engine cool is a big deal. Standard coolant temperature sensors offer fit and function to meet or exceed OE specifications for the peak operating performance of your vehicle's engine. Many functions of your vehicle depend on its coolant temperature sensor, so Standard sensors are 100 percent factory-tested to ensure trouble-free performance and extended service life. Do you have a check engine light? Replace corroded coolant temperature sensors with new ones from Standard Motor Products.
( 9 )
$14.99
On Sale
Holley Easy Level fuel level senders use LiDAR technology to precisely measure the depth of fuel remaining in your tank and work with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range fuel gauges. They also work with many other gauge brands. Compatible with tanks ranging from 4 to 39 in., setup is a breeze with the on-board buttons. Easily set empty and full tank positions, with reserve, right on your workbench before installing and then set the empty, half, and full positions on the gauge. The desired dampening rate is adjusted with dip switches right on the unit to reduce fuel slosh and gauge bounce by adjusting how fast or slow the gauge reacts to the fuel level change. Upgrade Classic Instruments' gauge sets and other brands to capture the benefits of Laser imaging, Detection, and Ranging (LiDAR) technology with Holley Easy Level senders. This exciting and innovative automotive application replaces vulnerable moving parts with a hi-tech laser. Besides the problems encountered with float setup, hitting baffles or tank wall, Easy Level eliminates having to set up the float-type sender, saving time and effort. Features: * Quickly reads fuel levels with zero contact * Easy installation with no moving parts; popular 5-bolt flange * Long life sensor and no failing floats * Easy to program the level of any tank and electronic gauge * Bolt Circle Diameter (BCD) is 2.122 in. * Output is a PWM signal for 12 V applications (10 to 20 V maximum) * Mounting hardware and rubber gasket * Maximum operating temperature of 185 degrees Note: Does not work with OE-style gauges that utilize an ohm only input
( 5 )
$124.95
$112.45
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
