Availability
Showing In Stock Items. Show All 127 Items.
Dakota Digital gauge pressure sending units are available for a variety of gauge applications. Each sending unit is made using high-quality materials by the pros at Dakota Digital.
( 21 )
$57.00
—
$99.75
Tanks Inc. MeterMatch fuel gauge interface modules will allow you to convert any ohm range fuel level sender to work with any ohm range fuel gauge. No longer do you need to drop your tank to change or customize your sender, or re-calibrate your fuel gauge. With Tanks Inc. MeterMatch device you can ensure that your gauges are accurately reading your fuel sender and more! Features include: * User can calibrate a custom ohm range (between 0 to 3,000 ohms) * Interface is compatible with nearly any short sweep fuel gauge and fuel sender combination * Module allows gauge calibration at empty, full, and two other points ensuring accurate readings—even with odd shaped gas tanks * Module allows for low and/or high set points that can trigger a blinking LED indicator to alert if gauge exceeds normal values * Screw terminal wire connections * Compact size ( 2.4 in. x 1.85 in. x 0.93 in.) * Simple rotary knob and push button calibration * Programmable voltage correction * Programmable low (or high) alarm (works with a LED indicator) * Programmable averaging can be turned on or off to help minimize needle bouncing * Gauges not included (sold separately from MatchMeter device)
( 23 )
$89.99
These Stewart Warner Performance gauge sending units ensure that you get fast, accurate information from your Stewart Warner gauges. A variety of sending units is available for use with Stewart Warner temperature, pressure, fuel level, and speedometer gauges.
( 74 )
$61.99
—
$93.99
Stewart Warner replacement senders are used with electrical gauges. They offer senders for electric oil, fuel pressure, and electric temperature gauges. Stewart Warner Performance replacement senders are designed to be used with Stewart Warner Performance gauges.
( 196 )
$58.99
—
$86.99
AutoMeter replacement senders are used with electrical gauges. The sending units are offered for more than a dozen gauge functions, including fuel, oil, water, boost, brake, oxygen, and nitrous data. They're available in different thread sizes, and some include adapter fittings.
( 231 )
$59.99
—
$66.99
The need for speed is often accompanied by a demand for accurate feedback. In fact, a speedometer at times becomes the most important gauge on the dash panel. If your system is malfunctioning or you prefer an upgrade in data precision, Dakota Digital electronic sending units deliver clean, sharp signals from your transmission to the speedometer. Some replacement kits process 8K pulses per mile, and others 16K, for instance--you choose the application and attachment style that's best for your particular vehicle.
( 66 )
$57.00
Since different manufacturers use different ohm ranges on their gauges and senders, why not purchase the corresponding VDO pressure sender for your VDO gauge? VDO produces these top-quality sending units for use with all of their electrical gauges to ensure accurate readings and a long life.
( 101 )
$54.99
—
$116.99
Just going with the flow? Not a good idea when dealing with the gas level in your vehicle. Dorman fuel tank level sending units are solutions to help keep you from running out of gas. These quality OE replacements will restore reliable fuel gauge readings with the proper fit and function. Replace a failing unit with the Dorman tank level sensor designed for your vehicle application.
( 58 )
$53.99
—
$104.99
On Sale
Holley aluminum fuel cells come in a several variations for nearly every race application, and Holley's fuel gauge sending units are the correct replacements to restore consistent level readings. Offered in an 8 or 9 in. depth for 5- and 10-gallon or 15- and 20-gallon fuel cells respectively, both styles have a tube design that acts as a damper, saves space, and eliminates the need for a float arm. They are 0 to 90 ohms (empty-full) to work with most aftermarket gauges, have a standard SAE 5-bolt mounting pattern, and include gasket and mounting hardware. Holley fuel gauge sending units are E85 compatible. Choose the best fit for your fuel cell.
Not Yet Reviewed
$68.25
Use a New Vintage USA speedometer sender to convert your mechanical speedometer takeoff or your electronic sensor-style speedometer output to an electronic pulse output. These speedometer senders are designed for use with custom installations, early model transmission applications, and all Marshall electronic speedometers.
( 15 )
$69.99
—
$109.99
Summit Racing™ offers restoration fuel sending units for a wide range of Chevrolet Cars , Trucks and GMC trucks from the 1940s, '50s, '60s, and '70s. These are exact reproductions of the originals, guaranteed to deliver accurate readings to your dash panel fuel gauge. Assembled from stainless steel for rust resistance, the sending units come with gaskets and all necessary hardware for installation. "Running on empty" may be a good song title, but it's not what any driver wants on the road or the track. Always know what's in the tank; order the fuel level sending unit replacement recommended for your vehicle.
( 65 )
$55.99
—
$85.99
When your fuel gauge is sending you mixed signals, it's time for some updated instrumentation. OER offers a wide range of fuel tank sending units to replace your faulty original. They're available in dozens of size and configurations for vehicles from the 1940s and up. The sending units come with all necessary hardware for a complete installation. Order the model recommended for your application.
( 198 )
$50.79
—
$65.99
Forget all the gear changing and cables to get the correct mph reading—there's a better way! AutoMeter universal speed sensors deliver a 12 V square wave signal to your electric speedometer. These sending units come with a mounting strap that can be shaped into whatever position is needed for most axle and driveshaft applications. They're available in universal and vehicle make-specific models.
( 6 )
$66.99
Dakota Digital pressure modules allow you to display an additional pressure reading within your RTX, HDX, VHX, and VFD3 (rev G) gauges. These BIM-03-2 modules are designed for Solid State pressure senders, providing you phenomenal accuracy. Pressure inputs: * Pressure (generic fluid or air) * Fuel pressure * Air pressure * Boost/vacuum * NOS pressure
( 4 )
$90.25
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$87.15
When it comes to replacing critical electronic equipment for your vehicle, like oil pressure sending units, don't trust aftermarket suppliers to get it right—rely on the ACDelco line of electronics. They offer various sensors, relays, and switches built to match factory parts in fit, form, and function. These oil pressure sending units will work with your vehicle's ECM to provide optimal performance. They're available in a variety of styles for fitment on vehicles from the 1960s and up. Order the model recommended for your application.
( 17 )
$51.99
—
$73.99
Is your ride's fuel gauge on the "level"? If you don't think you're getting the right readings or you're getting no reading Tanks can help fix the miscommunication. Their fuel level sending units are quality units built to send reliable, accurate data to your gauge so you will know exactly where you sit on fuel. Keep the communication honest with Tanks fuel level sensors on board.
( 318 )
$50.99
—
$64.99
Holley Sniper fuel gauge sending units can be used as replacements for your existing units. Promising to be a big help during your installation, these gold iridited Sniper EFI senders are available in several ohm ranges. So, should you decide to upgrade your dash to aftermarket gauges, Holley has the right range for your project.
( 5 )
$74.95
Tanks Inc. reed switch fuel level senders provide level information via a series of reed switches positioned inside of the sealed level tube, while an external float with built-in magnets trigger the reed relays to generate an ohm resistance value. With no moving mechanical parts other than the float, Tanks' reed switch fuel level senders are extremely durable and reliable, and they provide flexibility of installation, even in tanks with baffles while reducing slosh fluctuation. They are available for standard aftermarket, VDO, GM, and early Ford and Mopar gauges. Select the reed switch sending unit designed for your gauges. Additional features: * SAE 5-bolt mounting pattern * Full 304 stainless steel construction * Durable NBR float * Compatible with gas, diesel, hydraulic fluids, black water, and grey water * Gasket and mounting screws are included
( 2 )
$52.99
—
$57.99
You've run out of gas ... again. The gauge shows that you still have gas. What gives? Maybe it's time for a new fuel tank sending unit from RESTOPARTS® Manufactured. The sending units are exact reproductions guaranteed to perform flawlessly. Assembled from stainless steel for rust resistance, these replacements include an O-ring for sealing, as well as a 1/4 in. return line on select models. If running on empty is not your idea of excitement, install a new fuel sending unit from RESTOPARTS® Manufactured for accurate gas levels. They're available for a wide range of vehicles.
( 99 )
$72.99
—
$94.99
These Classic Instruments speed pulse sensors and their adapters enable you to calibrate your speedometer in less than a minute, and you don't even have to leave your driveway! Each and every Classic Instruments product is designed and calibrated in-house to ensure quality and dependability with one goal in mind--to meet the unique needs of all automotive enthusiasts. When it comes to speed pulse sensors, adapters, and all other instrument products, there's no better place to go than Classic Instruments.
( 14 )
$109.95
New Vintage USA pressure senders keep you in the "know." They quickly and properly read the pressure of your oil to keep you driving. They are made from quality materials to ensure accuracy, so you can relax. New Vintage USA pressure senders will allow you to keep an eye on your oil pressure as you are rolling down the highway.
( 2 )
$59.95
With a direct fit and OE-matched electrical connections, Spectra Premium fuel tank sending units are invaluable when replacing a faulty gas tank in your pickup. These instruments feature a new strainer, lock ring, O-ring, and all terminals and connectors. They also include a float when the OE model had one. The sending units meet or exceed the performance of the original parts they are replacing. Order the model recommended for your vehicle.
( 112 )
$50.99
—
$93.99
Haltech offers a variety of data acquisition components and accessories to facilitate automotive performance and engine management. These replacement oil temperature sensors are built to fit and function like the original parts, with a max reading of 302 degrees F. The sensors include matching Bosch EV1 plug and pins.
Not Yet Reviewed
$88.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
