Availability
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 26 )
$133.00
Equus mechanical oil pressure line kits offer two affordable solutions for installation and repair of your Equus mechanical gauge. First are their flexible nylon tubing kits and second is their copper tubing upgrade kits that can dramatically increase durability and will safeguard against the potential for cracked or split oil lines in the vehicle interior. Both kits include 6 ft. (1.8 m) of 1/8 in. (3.2mm) tubing, 1/8 in. brass compression fittings and ferrules, and 1/8 in. NPT to 1/4 in. NPT adapter bushing.
( 98 )
$12.99
—
$14.99
AutoMeter gauge cups enable you to mount individual gauges on the dash, below the dash, or outside on your hood cowl for a Pro Street look. The pedestal mounts are available in a variety of sizes and finishes.
( 269 )
$31.99
—
$59.99
We offer tubing kits, mounting cups, and replacement light bulbs to complete the installation of your Summit Racing™ gauges.
( 114 )
$5.99
—
$40.99
These OER 1967-68 F-body dash carrier assemblies are designed to fit your factory gauges in 1967-68 Camaro and Firebird models. They are injection-molded to exact factory specifications for an easy installation. The assemblies feature a heat-stamped bright chrome finish and bezels to match the original.
( 5 )
$129.99
Dakota Digital reproduction instrument bezels are designed to be replicas of the stock trim pieces. They're available in a variety of configurations and finishes to enhance your dash panel. Order the bezels tailored for fitment on your vehicle application—and give your gauges a shiny new look.
( 24 )
$85.50
—
$356.25
OER instrument panel carrier assemblies are exact reproductions of the original equipment to match the quality, appearance, and fitment. If you are restoring your classic's interior and are looking for a fresh place to mount all those instrument panel components, choose OER instrument panel carrier assemblies to give them a new home. They are easily modifiable to allow you to incorporate gauge instrumentation and come with the mounting clips.
( 5 )
$312.99
AutoMeter offers a complete line of tubing kits for replacement or initial installation of its mechanical gauges. They're available in braided stainless steel, copper, and nylon tubing to suit your needs.
( 144 )
$12.99
—
$108.99
Dakota Digital once again raises the bar for aftermarket instrumentation with their RTX control boxes! These gauge control modules are designed to receive input from various sensors and sends signals to your gauge instruments. The RTX Retrotech control box is for use with Dakota Digital's Retrotech digital instrument system—which represents the latest electronic dashboard technology for the street rodder, car, and truck enthusiast alike. This RTX system combines modern digital electronics with a traditional look to give the driver up-to-date and accurate information on the operation of his or her vehicle. Once the gauge display panel (sold separately) is in place, simply mount the RTX control box within reach of the supplied display cable (approximately 3 feet). Be sure to choose a mounting location that will allow access to wire all of the inputs on either side of the control box. The RTX control box can be mounted via double-sided tape, hook-and-loop fasteners, or screws in the two tabs on the control box for securing it under the dash for the ultimate clean installation. All the connections on the control box are clearly labeled to provide you with an easy, straight-forward installation. Some key features of the RTX Retrotech control boxes: * Retrotech control box provides status of different functions for accurate readings for DIM, engine, brake, fuel pressure, temperature, speed—and more! * Auxiliary input—BIM I/O port allows considerable expansion, more readings and data displayed * Simple outputs—proprietary cables connect directly to instrument and clock displays * Integrated terminal strips—easily connects existing wiring supplied sensor harnesses for a clean finished appearance * Bluetooth connectivity—available app offers simplified calibration and setup, for your Android or Apple iOS * Warning inputs—two, rpm and user-definable, for connection to an external light or rely
Not Yet Reviewed
$541.45
AutoMeter offers gauge panels that enable you to mount one, two, or three instruments. These aluminum "frames" are available in a variety of lengths and for different diameter gauges. They're ideal for mounting in the underdash position. You can never have too much data in the cockpit. Order the panels that correspond to your size and quantity needs.
( 169 )
$26.99
—
$42.99
Summit Racing™ offers a quality OEM replacement instrument gauge lens to complete the restoration of your gauge panel on your classic vehicle. Each direct-fit reproduction instrument gauge lens is made to original specifications to insure proper fitment. Order the model for your application.
( 10 )
$38.99
—
$60.99
On Sale
Brothers Trucks instrument bezels provide an easy way to dress up or refresh the interior of your modern classic GM pickup truck or SUV. The brushed aluminum finish provides that 'deluxe' look and the self-adhesive backing makes installation a snap. Brighten up the inside of your classic ride with an assist from Brothers Trucks instrument bezels.
( 2 )
$201.95
$40.64
—
$349.95
Save time, sensors, and wiring with Classic Instruments' Zeus-Link all -inclusive gauge interface modules. They will read vehicle data from CAN BUS to drive any Classic Instruments gauges accurately. These units are offered in several styles for connection to a GM OBDII port, Holley Sniper ECU and other Holley ECUs, or a Holley Sniper II ECU. Choose the correct module for your application. Additional features of Zeus-Link modules: * System queries vehicle upon installation to determine what list of parameters can be obtained from the vehicle and used as inputs to gauges * Spaces for six standard gauges: speedometer, tachometer, fuel, oil, volt, temperature, and two auxiliary gauges of the customer's choosing * All instruments can be driven traditionally through proper senders if vehicle ECU does not support an output the driver wants to monitor * Set up and managed all through an app available on the App Store or Google Play * The app is used to configure by choosing which gauges a customer has in the dash and how each gauge gets its signal * The app has a virtual gauge screen, aligning with the dash instruments * The app has easy diagnostics, displays values being received by Zeus-Link and will allow user to cycle gauges to predetermined positions, to verify and correct outputs and wiring * Warning and check engine light outputs on the Zeus-Link and external contacts to light a dash light * Dash light connection * All gauge connections to Zeus-Link (power, ground, signal, dash lights) * Additional resistor dongle available if needed to use multiple Holley CAN devices on the same harness * Harness plugs direct into Zeus-Link and then to Holley ECU or OBD * Holley harness has additional Holley ECU connector for other devices * On-board diagnostic lights give status of power, BLE, and data on the circuit board for Zeus-Link * Pass-through CAN port connection for other CAN devices * Compatible with all Classic Instruments sending units and gauges
Not Yet Reviewed
$399.95
AutoMeter low pressure fuel isolators are required when running a carbureted engine with a mechanical fuel pressure gauge mounted in the vehicle's interior. They install between the gauge and the fuel pressure port on your regulator or carb feed line and translate fuel pressure readings to the gauge, keeping flammable materials out of the passenger compartment. The red anodized aluminum version from AutoMeter is safe for competition use, NHRA approved, and includes fittings to connect to -4 AN braided stainless lines, as well as a handy mounting bracket for installation.
( 1 )
$131.99
Want more info and not more gauges? Dakota Digital BIM temperature modules will allow you to display additional temperature readings without additional gauges! These units utilize ground isolated senders for an easy install, without the headache of engine grounding, and the modules will display either Fahrenheit or Celsius, depending on the setting selected by your gauge cluster. Getting more data is easier with Dakota Digital BIM temperature modules.
( 3 )
$90.25
Allstar Performance gauge line kits are designed to provide easy connection to most mechanical oil and fuel pressure gauges. They include a pre-assembled length of -4 AN braided stainless steel hose with -4 AN hose ends; plus, both male and female 1/8 in. NPT adapters to work with most applications. These line kits are available in different lengths to suit your vehicle's requirements.
( 16 )
$30.99
One Holley EFI gauge module is required per set of CAN gauges. These plug-and-play gauge modules feature a stereo-style connector and pre-pinned ECU wire.
( 4 )
$149.95
Stewart Warner voltage reducers enable you to adapt lower-volt instruments to perform flawlessly in a higher-volt electrical system. For example, you could wire a 12 V dashboard gauge to safely run off a 24 V power source. These "resistors" serve as step-down transformers in dual-battery vehicles and other higher voltage equipment--reducing the power current being sent to accessories without overheating or circuit damage.
( 3 )
$30.99
Ringbrothers billet dash gauge bezel panels are beautiful reproductions of the factory original with contour rounded edges and hole cut-out provisions to surround your gauges. Made to the high-quality standards you can expect from Ringbrothers, these dash gauge cluster bezels are precision machined from 6061 aluminum, and are available in a natural aluminum or black anodized finishes to match your truck's other interior components. For premium parts and accessories to restore, maintain, and customize your Chevrolet, GMC, Dodge or Ford truck, choose Ringbrothers.
Not Yet Reviewed
$475.00
—
$500.00
Banks Power gauge pod suction mounts allow you to position a gauge anywhere on your dashboard or windshield. The sticky base suction cup secures a mounting mechanism designed to work with the iDash and other 52mm (2 1/16 in.) gauges. An adjustable arm enables you to position the instrument at a wide range of angles. These suction mounts are universal, for use in any vehicle. They are offered in single and dual pod styles with both kits including a hex key for adjustment and alcohol pad for surface preparation. Choose the best fit for your vehicle.
( 11 )
$39.00
—
$68.00
RESTOPARTS® Manufactured instrument cluster lenses offer a crystal-clear, factory-fresh look. Correctly reproduced, these injection-molded plastic gauge lenses replace your existing clouded or cracked dash panel lens. The cluster lenses are available for dozens of 1970s era Chevrolet Super Sport applications.
( 5 )
$92.99
Summit Racing™ gauge mounting cups enable you to add instrumentation virtually anywhere within sight—internally or externally—or to upgrade the housing of current dials. These pedestal-style cups are built from steel with a beautiful chrome or black finish. They fit gauges with body diameters of 2 5/8 in.
( 21 )
$19.99
—
$33.99
RESTOPARTS® Manufactured injection-molded plastic dash instrument carriers are exact reproductions of the original equipment. These carriers are available with or without air conditioning and Astro Ventilation, and feature the correct grain finish for an authentic appearance, as well as the properly located mounting holes for a perfect fit. Order the RESTOPARTS® injection-molded dash instrument carrier suited to fit your application needs.
( 2 )
$226.99
—
$269.99
Holley gauge pedestal mounting brackets provide solutions for mounting their analog-style standalone and CAN gauges. Now you can mount gauges on top of the dash, steering column, console, or any flat surface you would like. These pedestal-style brackets feature a billet aluminum base with black powdercoated metal strap, along with a rubber vibration insert. Each base has pre-drilled holes for easy installation. Holley brackets are available for 2 1/16 in., 3 3/8 in., or 4 1/2 in. diameter gauges.
( 12 )
$24.93
—
$31.18
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
