Availability
Showing In Stock Items. Show All 37 Items.
QuickCar fuel pressure isolators are crafted from aluminum and black anodized. They make safe interior mounting of your mechanical pressure gauges possible. QuickCar Racing fuel pressure isolators will keep any fuel inside the engine compartment behind the firewall--and not in the passenger compartment.
( 2 )
$139.95
AutoMeter low pressure fuel isolators are required when running a carbureted engine with a mechanical fuel pressure gauge mounted in the vehicle's interior. They install between the gauge and the fuel pressure port on your regulator or carb feed line and translate fuel pressure readings to the gauge, keeping flammable materials out of the passenger compartment. The red anodized aluminum version from AutoMeter is safe for competition use, NHRA approved, and includes fittings to connect to -4 AN braided stainless lines, as well as a handy mounting bracket for installation.
( 2 )
$113.99
These isolators are designed for the mounting of any AutoMeter mechanical pressure gauge inside your ride. They're rated at 200 psi working pressure with a maximum of 300 psi peak, and are compatible with gasoline, oil, and antifreeze.
( 6 )
$182.99
Install remote mounted fuel or oil gauges in a snap with Russell gauge fitting kits. These gauge kits include lightweight aluminum block adapters and gauge adapters, plus 6 ft. hose assemblies crafted from braided stainless steel. Get connected for precise gauge readings with the right fittings--fuel and oil gauge fittings from Russell Performance.
( 15 )
$48.95
Over time, high fuel pressure spikes can significantly reduce the life of your fuel pressure sender. These AutoMeter fuel pressure snubbers have been designed to fix that problem. They are manufactured from stainless steel, so they're good for any type of fuel. You can use one of these AutoMeter fuel pressure snubbers to help isolate the sender from engine vibrations and reduce back pulsing of the fuel system, in order to increase the life of the sender.
( 3 )
$30.99
AutoMeter offers fuel level gauge wiring harnesses. The 20 ft. pre-terminated digital stepper motor replacements are not for use with competition, Elite, or Sport-Comp II PC gauges. Ensure the accuracy of your fuel gauge with a sensor wiring harness from AutoMeter.
Not Yet Reviewed
$17.99
FiTech Can-Bus breakout harnesses connect FiTech fuel injection systems or transmission controllers with AutoMeter ICAN gauges, tachometers and speedometers. Order the harness needed for your application.
Not Yet Reviewed
$27.00
Do you need a longer harness? AutoMeter wideband extension harnesses help with your longer runs. If you're wiring a mid or rear engine vehicle, an 8 ft. harness is not going to get you where you need to go. AutoMeter wideband extension harnesses offer 25 ft. of length to get your air/fuel ratio gauges wired properly. AutoMeter extension harnesses are available in two models for your PRO Series and Street or analog wideband AFR gauges.
( 4 )
$61.99
—
$62.99
AEM Electronics X-Series gauge faces help to revive the look of your dash panel. These specialized replacements are available for a wide range of instrumentation—such as fuel and oil pressure, temperature, EGT, speed, volts, boost, and more. The kits also include a polished silver bezel. Customize or refresh your data clusters with AEM Electronics X-Series gauge faces.
( 9 )
$14.12
—
$21.75
Allstar Performance offers replacement gauge panels in 2- and 3-gauge configurations. Crafted from aluminum with a black and silver finish, along with instrument labels, the panels are designed to frame 2 5/8 in. dials such as oil pressure, water temperature, fuel pressure, and oil temperature. Select the size and options needed for your application.
Not Yet Reviewed
$18.99
—
$26.99
Replace your damaged, yellowed, or scratched lenses with one of these OER gauge lenses. They are manufactured from durable materials and come available in different styles and designs to fit your specific gauge application.
( 5 )
$79.99
You spend a lot of time looking at your gauges. Why not make sure that they are as clear as possible to read? These OER dash gauge lenses will make seeing through those old, foggy, and scratched lenses a thing of the past. These high-quality reproductions are manufactured to exact factory specifications. Get your gauges looking factory-new with these OER dash gauge lenses.
( 4 )
$14.99
Trim Parts replacement gauge faces have been manufactured to original factory specifications. These quality reproductions offer accurate fit, form, and function, as well as add authenticity and value to your classic ride, which make them a must-have for the serious restorer. Trim Parts is dedicated to manufacturing the highest quality products offered in the restoration industry by using the original GM tooling under licensing from GM when tooling is available. Otherwise, Trim Parts engineers and builds in-house tooling to meet the original GM specs and Trim Parts quality. Order the replacement gauge faces designed to fit your year/make/model vehicle.
Not Yet Reviewed
$38.99
—
$81.99
With Dakota Digital EFI interface modules you get more usable data—without adding more gauges! Their BIM Series of modules collect and output available readings from your system to compatible Dakota Digital VFD3, VHX, HDX, and RTX control box instrument systems. Dakota EFI interface modules are available to work with many aftermarket fuel injection kits, from AEM to MSD. In addition, for ease of installation, they are designed as direct plug-ins using the supplied harness for your specific application. The engine and transmission information that is available from the units depend on your system's module programming and add-ons. The possible values may include, but are not limited to: * Engine rpm * Engine coolant temperature * Intake/manifold air temperature * Fuel pressure * Oil pressure * Air/fuel ratio * Boost * MAP * Speedometer * Transmission temperature
( 26 )
$133.00
Allstar Performance gauge line kits are designed to provide easy connection to most mechanical oil and fuel pressure gauges. They include a pre-assembled length of -4 AN braided stainless steel hose with -4 AN hose ends; plus, both male and female 1/8 in. NPT adapters to work with most applications. These line kits are available in different lengths to suit your vehicle's requirements.
( 16 )
$30.99
Save time, sensors, and wiring with Classic Instruments' Zeus-Link all -inclusive gauge interface modules. They will read vehicle data from CAN BUS to drive any Classic Instruments gauges accurately. These units are offered in several styles for connection to a GM OBDII port, Holley Sniper ECU and other Holley ECUs, or a Holley Sniper II ECU. Choose the correct module for your application. Additional features of Zeus-Link modules: * System queries vehicle upon installation to determine what list of parameters can be obtained from the vehicle and used as inputs to gauges * Spaces for six standard gauges: speedometer, tachometer, fuel, oil, volt, temperature, and two auxiliary gauges of the customer's choosing * All instruments can be driven traditionally through proper senders if vehicle ECU does not support an output the driver wants to monitor * Set up and managed all through an app available on the App Store or Google Play * The app is used to configure by choosing which gauges a customer has in the dash and how each gauge gets its signal * The app has a virtual gauge screen, aligning with the dash instruments * The app has easy diagnostics, displays values being received by Zeus-Link and will allow user to cycle gauges to predetermined positions, to verify and correct outputs and wiring * Warning and check engine light outputs on the Zeus-Link and external contacts to light a dash light * Dash light connection * All gauge connections to Zeus-Link (power, ground, signal, dash lights) * Additional resistor dongle available if needed to use multiple Holley CAN devices on the same harness * Harness plugs direct into Zeus-Link and then to Holley ECU or OBD * Holley harness has additional Holley ECU connector for other devices * On-board diagnostic lights give status of power, BLE, and data on the circuit board for Zeus-Link * Pass-through CAN port connection for other CAN devices * Compatible with all Classic Instruments sending units and gauges
( 1 )
$399.95
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement pressure sensor extension parts are made from high-quality materials and designed to factory specs to ensure proper fit and function. * Suits: 1/8 in. NPT thread MAP, oil and fuel pressure sensors * Includes: Fragola -4 AN braided stainless steel 18 in. hose with male and female 1/8 in. NPT adapters and rubber insulated P-clamps
Not Yet Reviewed
$36.00
AutoMeter DashControl OBDII gauge controllers are, to date, the most advanced way of displaying vehicle data. There's nothing to install, no programing, no changes to your vehicle in any way. Simply plug the unit into your vehicle's OBD-II port—and it turns your factory dashboard display into a fully customizable gauge canvas. See all of the data your vehicle has to offer on your driver information center, heads-up display, or radio. You can also set up visual and audible alerts for any condition or vehicle value. DashControl controllers include two auxiliary 0-5 V inputs, so you can add aftermarket sensors for other values you'd like to monitor. Additional features of Auto Meter DashControl OBDII gauge controllers: * Compatible with vehicles equipped with or without HUD (heads-up display) * Control your NPP/Bi-mode exhaust with your cruise control switch * See boost, fuel pressure, knock retard, and much more using your factory displays * 0-60, 1/8th mile, 1/4 mile, 1/2 mile, and one mile elapsed time recorder * Calculate horsepower and torque * Selectable display location * User upgradeable via free downloads * Zero permanent modifications to vehicle; just unplug and resume * 100 percent warranty friendly—completely reversible by simply unplugging the module * Low power sleep mode ensures your battery will not be drained if DashControl is left in the vehicle
( 2 )
$299.99
—
$309.99
Painless Performance universal gauge harnesses include GM color-coded wire, quick connects for easy gauge removal, and all of the hardware required to wire your gauges. They also include connectors for the following: Voltmeter, temperature gauge, oil pressure gauge, tachometer, fuel level, and illumination lights. They work with VDO, Auto Meter, Stewart Warner, and most other brands of gauges.
( 25 )
$94.99
—
$95.99
Dakota Digital once again raises the bar for aftermarket instrumentation with their RTX control boxes! These gauge control modules are designed to receive input from various sensors and sends signals to your gauge instruments. The RTX Retrotech control box is for use with Dakota Digital's Retrotech digital instrument system—which represents the latest electronic dashboard technology for the street rodder, car, and truck enthusiast alike. This RTX system combines modern digital electronics with a traditional look to give the driver up-to-date and accurate information on the operation of his or her vehicle. Once the gauge display panel (sold separately) is in place, simply mount the RTX control box within reach of the supplied display cable (approximately 3 feet). Be sure to choose a mounting location that will allow access to wire all of the inputs on either side of the control box. The RTX control box can be mounted via double-sided tape, hook-and-loop fasteners, or screws in the two tabs on the control box for securing it under the dash for the ultimate clean installation. All the connections on the control box are clearly labeled to provide you with an easy, straight-forward installation. Some key features of the RTX Retrotech control boxes: * Retrotech control box provides status of different functions for accurate readings for DIM, engine, brake, fuel pressure, temperature, speed—and more! * Auxiliary input—BIM I/O port allows considerable expansion, more readings and data displayed * Simple outputs—proprietary cables connect directly to instrument and clock displays * Integrated terminal strips—easily connects existing wiring supplied sensor harnesses for a clean finished appearance * Bluetooth connectivity—available app offers simplified calibration and setup, for your Android or Apple iOS * Warning inputs—two, rpm and user-definable, for connection to an external light or rely
Not Yet Reviewed
$541.45
Your dashboard panel looks so clean and professional, with informational dials like the speedometer, tachometer, odometer, fuel gauge, warnings, and indicators. Imagine all of the "spaghetti" on the flip side! American Autowire gauge cluster wiring harnesses connect your vital dash displays to the proper brain sources under the hood. Choose a universal kit or one designed for your specific brand of gauges.
( 2 )
$65.55
—
$114.95
Whether it's a tachometer or fuel level dial, your vehicle gauges are only as accurate as the supply lines furnishing the data. One great way to properly connect your instrumentation is with one of these Bosch nylon tubing kits. The components include 72 in. of 1/8 in. high-temperature nylon tubing, tube fittings, and a 1/4 in. brass reducer bushing adapter.
( 4 )
$9.99
FAST wideband O2 wiring harnesses are your connections to air/fuel monitoring. When you need gauge accessories to keep the information flowing in your XFI system, FAST wideband O2 wiring harnesses will fill your requirements.
( 1 )
$59.95
The Stop Shop's console gauge bulbs can offer significant benefits for your vehicle's interior lighting, particularly in terms of visibility, longevity, and efficiency. As part of the vehicle's instrument cluster, console gauge bulbs serve to illuminate the gauges and warning lights for the driver. They allow the driver to see the readings on the gauges and indicators, providing the driver with critical information about the vehicle's status, such as speed, engine temperature, and fuel levels. Burnt out gauge console bulbs can lead to costly repairs or even stranded situations. Don't risk it! Order these new bulb replacements to help keep tabs of your vehicle's performance status.
Not Yet Reviewed
$14.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
