Availability
On Sale
Holley Easy Level fuel level senders use LiDAR technology to precisely measure the depth of fuel remaining in your tank and work with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range fuel gauges. They also work with many other gauge brands. Compatible with tanks ranging from 4 to 39 in., setup is a breeze with the on-board buttons. Easily set empty and full tank positions, with reserve, right on your workbench before installing and then set the empty, half, and full positions on the gauge. The desired dampening rate is adjusted with dip switches right on the unit to reduce fuel slosh and gauge bounce by adjusting how fast or slow the gauge reacts to the fuel level change. Upgrade Classic Instruments' gauge sets and other brands to capture the benefits of Laser imaging, Detection, and Ranging (LiDAR) technology with Holley Easy Level senders. This exciting and innovative automotive application replaces vulnerable moving parts with a hi-tech laser. Besides the problems encountered with float setup, hitting baffles or tank wall, Easy Level eliminates having to set up the float-type sender, saving time and effort. Features: * Quickly reads fuel levels with zero contact * Easy installation with no moving parts; popular 5-bolt flange * Long life sensor and no failing floats * Easy to program the level of any tank and electronic gauge * Bolt Circle Diameter (BCD) is 2.122 in. * Output is a PWM signal for 12 V applications (10 to 20 V maximum) * Mounting hardware and rubber gasket * Maximum operating temperature of 185 degrees Note: Does not work with OE-style gauges that utilize an ohm only input
( 5 )
$124.95
$112.45
On Sale
AEM Electronics PSIG sensor kits feature high-quality sealed housings for maximum durability. They have an integral weatherproof connector for an easy plug-in installation. Kits are available for boost, exhaust gas temperature, nitrous oxide, brake pressure, inlet air temperature, or UEGO replacement gauges. PSIG sensor kits are offered in brass or stainless steel. Use brass sensors where you need a good reference to what pressure is being seen; e.g., reference/information of manifold pressure, not for ECU calibration. Stainless sensors should be used where you need exact details of the pressure; e.g., calibration/critical MAP sensor information for the ECU. Features include: * Stainless steel sensors are accurate to within 1-percent of full scale (pressure sensors) * Brass sensors accurate to within 3-percent of full scale (pressure sensors) * High-quality sealed sensor housings are virtually impervious to automotive fluids (360-degree welded wetted area) * Connector, pins, and pin lock included
( 18 )
$87.15
—
$199.95
$78.45
—
$179.95
On Sale
Holley aluminum fuel cells come in a several variations for nearly every race application, and Holley's fuel gauge sending units are the correct replacements to restore consistent level readings. Offered in an 8 or 9 in. depth for 5- and 10-gallon or 15- and 20-gallon fuel cells respectively, both styles have a tube design that acts as a damper, saves space, and eliminates the need for a float arm. They are 0 to 90 ohms (empty-full) to work with most aftermarket gauges, have a standard SAE 5-bolt mounting pattern, and include gasket and mounting hardware. Holley fuel gauge sending units are E85 compatible. Choose the best fit for your fuel cell.
( 1 )
$68.25
$44.36
—
$61.45
On Sale
If you are running an aftermarket pump that is mounted external of the fuel tank, you will need to install a draw straw or drill your fuel tank to accommodate a sump. Each of these has some significant drawbacks including the 1/4 tank issues that result in cavitation of the pump when you draw air into the fuel system. To resolve this issue there are Fleece Performance SureFlo performance sending units. SureFlo units are designed to work with aftermarket lift pumps and fit directly into your stock sending unit location. Each one features factory-style quick disconnects to adapt your stock fuel lines at the tank, giving you the cleanest installation available, and requiring no cutting or drilling of the tank. SureFlo works by drawing fuel from, and returning fuel to, the bucket assembly at the base of the unit, ensuring you are always drawing fuel into your pump and not drawing air into the fuel system, as well as eliminating the dreaded 1/4 tank problems. The SureFlo bucket also incorporates one-way check valves to allow fuel to easily flow in at lower levels. Fleece Performance SureFlo performance sending units are a great alternative for trucks originally equipped without an in-tank pump needing to repair a malfunctioning level sender or if you are simply looking to run your own custom fuel lines directly to the tank. Choose the SureFlo unit designed for your Cummins or Duramax fuel system. Features: * New fuel level electronics and fuel float * Heavy-duty billet aluminum cap * Universal -8 AN ports for professionally plumbing a custom fuel setup * New O-ring or flange seal * Adaptation pigtail connector (where applicable)
( 5 )
$359.00
—
$379.00
$305.15
—
$322.15
On Sale
The AEM Electronics 8-Channel K-Type EGT CAN module uses an integrated cold junction sensor to ensure lab-grade temperature readings across all eight channels. It has the ability to read better than one percent full scale, even at the extreme temperature range (-328 to 2,501 degrees F). The module also includes open circuit/fault detection to notify you if a sensor loses its connection or needs to be replaced. This unit will work with non-AEM devices with configurable CAN bus. The module utilizes flexible CAN configuration jumpers, which allow it to be used with just about any third party devices. Features and benefits include: * Includes 8 K-type thermocouple inputs to accept common K-type thermocouple sensors * Uses common miniature thermocouple sockets * Daisy-chain two modules together for up to 16 temp inputs through a single plug * Outputs all channels via configurable CAN bus via one-plug connection * Cold junction compensated for lab-grade accuracy * Temperate resolution 0.18 degrees F * Integrated open circuit/fault detection
Not Yet Reviewed
$486.95
$437.95
On Sale
Optimizing your dash solution to display your vehicle speed is simple with Holley GPS digital USB modules. The 46 in. USB cables allow you to install the digital display unit virtually anywhere on the dashboard—without the need for external sensor information. Eliminate old, noisy mechanical speedometer cables and step up to Holley's accurate GPS speedometer output module. Additional information: * USB connection for user-friendly, plug-and-play installation * Magnetic base provides for multiple mounting solutions * 10 Hz refresh rate for ultra-accurate, real-time speedometer output * Requires clear line-of-sight with the sky for satellite acquisition * Can only be used with 553-106 or 553-109 digital dashes
Not Yet Reviewed
$106.95
$96.25
On Sale
If you're tired of guessing how much fuel is in your gas tank, Crown Automotive fuel tank sending units are designed as replacement units for your Jeep. With some models, modification to the new sending unit may be necessary to directly replace the OE unit. Crown offers the largest supply of Jeep replacement parts.
( 26 )
$33.99
—
$129.99
$30.59
—
$116.99
On Sale
Holley Sniper fuel gauge sending units can be used as replacements for your existing units. Promising to be a big help during your installation, these gold iridited Sniper EFI senders are available in several ohm ranges. So, should you decide to upgrade your dash to aftermarket gauges, Holley has the right range for your project.
( 5 )
$74.95
$67.45
On Sale
Scott Drake pressure sending units are designed to give accurate oil pressure readings to your oil pressure gauges. These units are offered in a choice of styles to cover a variety of applications.
( 6 )
$38.03
$34.23
On Sale
Nitrous Outlet ProMax Progressive Controller nitrous pressure sensors allow the controllers to see accurate bottle pressure. Designed to be used with the ProMax Progressive Controllers, the sensors have 1/8 in. NPT male threads for easy connection to the pressure source.
( 1 )
$117.99
$100.29
On Sale
These Classic gauge sending units are just what you need to keep your gauges working smoothly and accurately. They are available for temperature and pressure gauges and different thread sizes.
( 43 )
$41.95
—
$57.85
$23.07
—
$31.82
On Sale
AEM Electronics offers high-quality stainless steel PSIa sensor kits in 15 (1 BAR), 30 (2 BAR), 50 (3.5 BAR), 75 (5 BAR) and 100 (7 BAR). PSIa is referenced to absolute zero—the pressure measurement when all the pressure exerted by the atmosphere has been removed. The most common use for absolute pressure sensors is reading manifold pressure. PSIa sensors are required if you wish to measure vacuum. A PSIa sensor will read about 14.7 psi when the sensing element is exposed to atmospheric pressure at sea level; however, they can be recalibrated to read zero at atmospheric, and a negative number at values less than atmospheric pressure.
Not Yet Reviewed
$184.95
$166.45
On Sale
Classic Instruments lever-type fuel senders are designed to operate correctly with any classic fuel level gauge. These units can easily adjust from tank depths of 6 in. to 24 in. with a standard 5-bolt mounting pattern.
( 24 )
$57.85
$37.60
On Sale
Get fuel where you need it with one of these FUELAB draw straw tube kits. They're manufactured from durable materials and install easily with the fuel pump module.
( 3 )
$58.85
$52.96
On Sale
Are you experiencing sporadic oil pressure readings? Crown Automotive oil pressure sending units can get your oil pressure gauge working accurately again. Replacing the sensor is usually the easiest and cheapest start to troubleshooting oil pressure issues, and Crown offers an extensive line of quality factory-style replacement sensors; many are direct-fit replacements.
( 20 )
$6.99
—
$59.99
$6.29
—
$53.99
On Sale
Restore accuracy to your fuel readings with a Crown Automotive fuel sending unit. A major part of fuel delivery systems are the sending units. They monitor the fuel level and send the information to your dash gauge for a visual warning. Crown offers quality units to fit many applications, from vintage to classic Jeeps. Still wondering how much gas is really in your tank? Replace guesswork with dependable answers from Crown Automotive fuel sending units.
( 6 )
$29.99
—
$137.99
$26.99
—
$124.19
On Sale
Agility Auto Parts offers a complete line of fuel tank sending units covering a wide variety of North American vehicles. These sending units are engineered to meet or exceed all OEM specifications. They're corrosion-resistant, leak-resistant, and made of durable materials for long-lasting use. Agility Auto Parts fuel tank sending units are available in a range of sizes and attachment styles. Order the model recommended for your applications.
( 2 )
$125.99
$113.39
On Sale
Prevent fuel contamination and leaks with Crown Automotive fuel tank sending unit gaskets. These crucial gaskets are required to avoid dangerous fuel leaks. Old gaskets can deteriorate over time. These replacements are available in a variety of sizes, materials, and configurations for precise fitment on specific applications. For safety and fuel efficiency, check your gaskets regularly and, when needed, replace them with factory-style Jeep products from Crown.
( 17 )
$2.99
—
$9.99
$2.69
—
$8.99
On Sale
Scott Drake temperature sending units are for use as direct replacements for the factory units. These sensors are made from high-quality materials to original specifications to ensure proper fit and function.
( 4 )
$10.65
$9.59
On Sale
Edge EAS pressure sensors come equipped with the proper wires and connectors to plug right into the Universal Sensor Input system. This will save you time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Edge Accessory System pressure sensors can be used to monitor boost psi, fuel rail pressure, air bag pressure, lift pump pressure, pre and post intercooler pressure, and much more.
( 1 )
$207.95
$187.15
On Sale
AEM Electronics EGT thermocouples are economical and fast responding K-type thermocouples. They include a closed-tip TC sensor with a protective inconel sheath, 10 ft. extension wire, 1/8 in. NPT compression fitting, and ring and terminal harness. AEM EGT thermocouples are available individually or in 2- or 4-packs. Specs: * Maximum temperature: 1800 degrees F (982.2 degrees C) * Sheath length: 3 in./76.2mm * Sheath diameter: 0.125 in./3.18mm * Termination: Ring terminals * Wire length: 12 in. * Accuracy: Greater of 3.96 degrees F/2.2 degrees C or 0.75 percent
Not Yet Reviewed
$117.95
—
$420.95
$64.95
—
$377.95
On Sale
Are you tired of guessing how much fuel is in your tank? Scott Drake replacement sending units come complete with either an original brass or an economical plastic float. Scott Drake inspects, pressure-tests, and performs an OHMS test on all of their sending units. Scott Drake manufactures these units from quality materials and they feature zinc plated steel construction to prevent corrosion.
( 63 )
$58.25
$52.45
On Sale
Use a New Vintage USA speedometer sender to convert your mechanical speedometer takeoff or your electronic sensor-style speedometer output to an electronic pulse output. These speedometer senders are designed for use with custom installations, early model transmission applications, and all Marshall electronic speedometers.
( 15 )
$39.95
$35.96
On Sale
Crown Automotive oil temperature sensors offer accurate, continuous monitoring and communication with your vehicle's computer and dash instruments. They work with other temperature sensors and monitors in your car to ensure that the engine temperature remains within an acceptable range for optimum performance. Damage can occur due to many reasons--sensor failure, wiring damage, corrosion, and more. If you believe that there is a malfunction with the sensors in your car, replace them immediately with quality Crown parts.
Not Yet Reviewed
$11.99
—
$18.99
$10.79
—
$17.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
