Availability
Manufacturer Rebate
AutoMeter Pro-Lite warning light sending units are designed to trigger your warning light at the right time, when you need it the most. If you want to prevent engine damage, AutoMeter has you covered.
( 14 )
$28.99
—
$32.99
Manufacturer Rebate
AutoMeter GPS speedometer interface modules can turn any electronic speedometer into a GPS speedometer with just the push of a button. They offer plug-and-play functionality with any AutoMeter programmable electronic speedometer and simple on-button, 10-second calibration for nearly every other electronic speedometer on the market. They feature IP67 construction and are fully sealed against water and dust. They include a fully sealed and paintable magnetic micro antenna and a lightning-fast 10 Hz sampling rate.
( 47 )
$258.99
Manufacturer Rebate
AutoMeter replacement senders are used with electrical gauges. The sending units are offered for more than a dozen gauge functions, including fuel, oil, water, boost, brake, oxygen, and nitrous data. They're available in different thread sizes, and some include adapter fittings.
( 231 )
$18.99
—
$170.99
Manufacturer Rebate
AutoMeter offers universal fuel level sending units in a variety of styles. For replacement or when installing a tank with no sending unit, select the model best suited for your application. Ensure that your fuel gauge is receiving proper data.
( 37 )
$45.99
—
$46.99
Manufacturer Rebate
AutoMeter Programmable Electronic Speedometer Senders convert your mechanical speedometer takeoff or electronic sensor-style speedometer output to an electronic pulse output. They're designed for use with custom installations, early model transmission applications, and all AutoMeter electronic speedometers. The senders are available in different styles for a variety of auto make applications.
( 55 )
$109.99
—
$117.99
Manufacturer Rebate
Monitor your exhaust gas temperature and/or cylinder head temperature with AutoMeter pyrometer sending units. They are designed for the professional, sportsman, and amateur racer.
( 5 )
$89.99
—
$219.99
Manufacturer Rebate
These AutoMeter nitrous pressure sending unit extension harnesses are designed for nitrous bottles that are mounted in the trunk or back of the car.
( 1 )
$52.99
Manufacturer Rebate
AutoMeter fuel tank sending unit adapters are designed to convert a standard 5-hole sender to an early-style, 6-hole collar. They are manufactured from durable aluminum and include the gasket for secure mounting.
( 10 )
$44.99
Manufacturer Rebate
Forget all the gear changing and cables to get the correct mph reading—there's a better way! AutoMeter universal speed sensors deliver a 12 V square wave signal to your electric speedometer. These sending units come with a mounting strap that can be shaped into whatever position is needed for most axle and driveshaft applications. They're available in universal and vehicle make-specific models.
( 6 )
$66.99
—
$102.99
Manufacturer Rebate
AutoMeter pyrometer thermocouples are type "K" sensors with a stainless probe and 10 in. wire encased in wire braid for heat protection. Use them with your Spek-Pro pyrometer (EGT) gauges and AutoMeter water/methanol injection controller Stage 3 kits. Get accurate exhaust temperature readings with an AutoMeter pyrometer thermocouple.
( 2 )
$62.99
Manufacturer Rebate
Innovate offers high-quality pressure sensors to provide needed data regarding air, fuel, oil, water, or transmission pressure gauges. These replacement units will work with any Innovate air or fluid pressure gauge or sensor interface.
Not Yet Reviewed
$25.99
—
$166.99
Manufacturer Rebate
AutoMeter offers these replacement probe kits for use with their gauges. They include the probe, wire, and necessary fittings.
( 4 )
$74.99
—
$169.99
Manufacturer Rebate
Stack Gauges temperature sensors let you know what's going on under the hood. These resistive analogue sensors are available for replacing non-working sensors. Get accurate info on your oil, water, and transmission temperature with replacement sensors from Stack Gauges.
Not Yet Reviewed
$48.99
—
$164.99
Manufacturer Rebate
These pressure sensors by Stack Gauges feature a 150 psi analog fluid pressure sensor and have male push-on spade terminals. Stack is a leading supplier of dashboard instruments to motorsports and automotive customers worldwide. Go with a pressure sensor made by a name you can depend on. Go with Stack Gauges.
Not Yet Reviewed
$59.99
—
$264.99
Manufacturer Rebate
The AutoMeter AirDrive system is capable of broadcasting two additional analog sensor inputs to deliver information not found on your vehicle's data bus. Add a pressure sensor to your engine to monitor your engine's life with the AirDrive pressure sensor. These sending units can gauge fuel pressure, oil pressure, boost, and more.
( 1 )
$140.99
Manufacturer Rebate
These AutoMeter replacement stepper motor wiring harnesses are designed to fit your existing stepper motor box and install without any modifications. They include preterminated ends for a simple, direct plug-in installation.
( 6 )
$24.99
Manufacturer Rebate
Over time, high fuel pressure spikes can significantly reduce the life of your fuel pressure sender. These AutoMeter fuel pressure snubbers have been designed to fix that problem. They are manufactured from stainless steel, so they're good for any type of fuel. You can use one of these AutoMeter fuel pressure snubbers to help isolate the sender from engine vibrations and reduce back pulsing of the fuel system, in order to increase the life of the sender.
( 3 )
$26.99
Manufacturer Rebate
Do you need a longer harness? AutoMeter wideband extension harnesses help with your longer runs. If you're wiring a mid or rear engine vehicle, an 8 ft. harness is not going to get you where you need to go. AutoMeter wideband extension harnesses offer 25 ft. of length to get your air/fuel ratio gauges wired properly. AutoMeter extension harnesses are available in two models for your PRO Series and Street or analog wideband AFR gauges.
( 4 )
$52.99
Manufacturer Rebate
AutoMeter extension modules are designed to extend the wiring length of the thermocouple of any incandescent backlit AutoMeter pyrometer/EGT gauge up to 75 ft., without any loss of accuracy or response. These modules are great for use in rear engine applications, overhead console mounts, or any setup where the thermocouple wiring supplied with your pyrometer or EGT gauge is too short to successfully complete the installation.
( 2 )
$98.99
—
$102.99
Manufacturer Rebate
AutoMeter's new state of the art AirDrive module provides a plug-and-play solution that wirelessly transmits data through a secure WiFi network from your vehicle to award-winning AirDrive gauges. You can program configurable colors, warning points, and peak recall functions through AutoMeter's free AirDrive smartphone app. Fast installation is as simple as plugging the control module into the vehicle's OBDII port, mounting and powering gauges, and connecting to the mobile app—eliminating any fear of voiding factory warranties on your new vehicle. The AirDrive system is capable of broadcasting two additional analog sensor inputs to deliver information not found on your vehicle's data bus. Take plug-and-play performance to the next level with the AutoMeter AirDrive system. (Works with most 1996 and newer OBDII vehicles.)
( 1 )
$57.99
Manufacturer Rebate
AutoMeter weld-in temperature adapters securely attach thermal couplers to pipe adapters and intake manifolds. They are made from steel and have female threads for a proper fit.
( 17 )
$47.99
Manufacturer Rebate
Your new Stack ST700 dash display will need the right sensors. These ST700 standard analog sensors are smaller, lighter in weight, and provide high accuracy with exceptionally reliability. Stack analog sensors are easy to install and are available for temperature and pressure gauges in your ST700 dash display. Choose the right sensors to send critical data to your gauges--Stack ST700 standard analog sensors.
Not Yet Reviewed
$102.99
—
$171.99
Manufacturer Rebate
AutoMeter replacement sender harnesses are for use with senders for electrical gauges. These harnesses work with sender gauges on electric oil, fuel pressure, and electric temperature gauges. These replacement sender harnesses are designed to be used with AutoMeter senders.
Not Yet Reviewed
$15.99
Manufacturer Rebate
These AutoMeter playback tachometer extension harnesses give you the ability to move the playback control module to a location where it is easy for you to use. They include pre-terminated, Weatherpack-style connections for a simple plug-in installation.
Not Yet Reviewed
$64.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
