Availability
Showing In Stock Items. Show All 11 Items.
On Sale
AEM Electronics EGT thermocouples are economical and fast responding K-type thermocouples. They include a closed-tip TC sensor with a protective inconel sheath, 10 ft. extension wire, 1/8 in. NPT compression fitting, and ring and terminal harness. AEM EGT thermocouples are available individually or in 2- or 4-packs. Specs: * Maximum temperature: 1800 degrees F (982.2 degrees C) * Sheath length: 3 in./76.2mm * Sheath diameter: 0.125 in./3.18mm * Termination: Ring terminals * Wire length: 12 in. * Accuracy: Greater of 3.96 degrees F/2.2 degrees C or 0.75 percent
Not Yet Reviewed
$420.95
$377.95
On Sale
Aeromotive fuel pump bladder baffle sets are a complement to the APEX Phantom systems. They open and close the door with the Phantom flow control technology while providing a continuous, high fuel flow into the baffle. It's critical to allow a large volume of fuel to flow into the baffle naturally from the surrounding tank—and also important to keep it there. The Phantom bladder baffle can ensure this. Installed in the inlet passages at the base of the Phantom bladder, the new Phantom bladder baffle increases the flow area into the bladder to promote rapid fuel recovery from the surrounding tank—while deploying a PTFE check ball that acts to keep that critical fuel in the bladder, preventing it from escaping during hard acceleration, cornering, and off-angle vehicle maneuvers. The units are constructed with CNC-machined billet aluminum valve bodies, which are then anodized and loaded with a PTFE check ball and locked into the Phantom bladder with a PTFE retaining washer. Phantom bladder baffles are designed for durability and are fully compatible with gasoline and ethanol fuels. They require no special tools and may be used in any existing or new Phantom bladder, with the Apex Phantom, or as a stand-alone solution to slosh control.
Not Yet Reviewed
$279.55
$251.60
On Sale
Aeromotive fuel pump bladder and baffle sets are a complement to the APEX Phantom systems. These bladder baffles open and close the door with the Phantom flow control technology while providing a continuous, high fuel flow into the baffle. It's critical to allow a large volume of fuel to flow into the baffle naturally from the surrounding tank—and also important to keep it there. The new Phantom bladder and baffles can ensure this. They increase the flow area into the bladder to promote rapid fuel recovery from the surrounding tank—while deploying a PTFE check ball that acts to keep that critical fuel in the bladder, preventing it from escaping during hard acceleration, cornering, and off-angle vehicle maneuvers. The units are constructed with CNC-machined billet aluminum valve bodies, which are then anodized and loaded with a PTFE check ball and locked into the Phantom bladder with a PTFE retaining washer. Phantom bladder and baffles are designed for durability and are fully compatible with gasoline and ethanol fuels. They require no special tools and may be used in any existing or new Phantom bladder, with the Apex Phantom, or as a stand-alone solution to slosh control.
( 1 )
$402.10
$361.89
On Sale
Holley EFI analog display gauges use digitally-delivered information over Holley's sophisticated CAN bus or wire directly to your sending unit, providing your ride with a classic readout. Those using the bus get their data from the Holley ECU, meaning that you don't have to run wires all over the vehicle. All you have to do is run a single cable to the ECU and then daisy-chain the rest. Holley analog gauges are available to monitor a variety of automotive temperature and pressure functions, along with programmable fuel level and voltage options. Product features include: * Available with black face with white lettering or white face with black lettering. * LED dimmable backlit design with red pointers makes them easy to read day or night * All gauges are electric style and may include sending units depending on gauge type * Pointer is driven by either a high-torque internal stepper motor or internal microprocessor (depending on application) to ensure accurate movement in street and racing conditions * CNC-machined billet aluminum bezels with an anodized finish on some models * Threaded bodies allow a single bezel nut to hold the indicators firmly in place * Bezels are threaded for easy replacement with multiple bezel options available * Each is tested to ensure a top-quality, accurate gauge
( 15 )
$368.95
$332.05
On Sale
Holley EFI tachometer gauges complement your other instrumentation with precision and style. Designed specifically for use with Holley EFI systems, they also work as standalone units. The dials are available in multiple size options, as well as your choice of black or white numerals and background face. These tachs are compatible with all Holley EFI touch screens, dashes, hand-held tuners, and other CAN devices—making them great for Holley EFI users looking to install a combination of needle gauges and LCD accessories. Holley EFI tachometer additional details: * Will work with both distributor and distributor-less ignitions without requiring any special tach adapters * Practically universal, works with most gasoline engines—and is programmable from 0.5 to 6 pulses-per-revolution (PPR) * Slim-style mounting requires very little dash space for installation * 240-degree sweep pointer from 8 to 4 o'clock makes gauges more natural to read at a glance * Internal microprocessor ensures accurate pointer movement in street and racing conditions * Spin-lock ring threads to the back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum threaded bezels with anodized finish
( 4 )
$291.95
$262.75
On Sale
The Holley Sniper 3.5 in. LCD touch screen controller gives you access to a wide range of tuning options. These hand-held controllers can be used as a fully customizable data monitor—and with the unit's 3.5 in. display, your Sniper EFI system vitals can be viewed at a quick glance! Features and benefits include: * Full color, backlit 3.5 in. touch screen LCD * Laptop-free tuning changes to help optimize mileage, drivability, and performance * Basic tuning options allow simple adjustments of basic fuel, fuel learn, basic idle, spark, and more * System tuning options allow modifications to outputs, engine setup, ignition setup * Advanced tuning options allow fine-tuning of fuel, closed loop, learn, and idle—including IAC parameters and idle spark * Monitor a vast number of parameters in pre-configured, multi-gauge, and monitor screens—or customize your own * Set up ECU data-logging, download data-logs to SD card, upload and download global folders via SD card, update ECU firmware, and adjust rev limiters 1 and 2 * Includes 3.5 in. touch screen, mounting sleeve, power and extension harness, and SD card
( 10 )
$390.95
$351.85
On Sale
The AEM Electronics 8-Channel K-Type EGT CAN module uses an integrated cold junction sensor to ensure lab-grade temperature readings across all eight channels. It has the ability to read better than one percent full scale, even at the extreme temperature range (-328 to 2,501 degrees F). The module also includes open circuit/fault detection to notify you if a sensor loses its connection or needs to be replaced. This unit will work with non-AEM devices with configurable CAN bus. The module utilizes flexible CAN configuration jumpers, which allow it to be used with just about any third party devices. Features and benefits include: * Includes 8 K-type thermocouple inputs to accept common K-type thermocouple sensors * Uses common miniature thermocouple sockets * Daisy-chain two modules together for up to 16 temp inputs through a single plug * Outputs all channels via configurable CAN bus via one-plug connection * Cold junction compensated for lab-grade accuracy * Temperate resolution 0.18 degrees F * Integrated open circuit/fault detection
Not Yet Reviewed
$486.95
$437.95
On Sale
For fast response times, AEM X-Series wideband UEGO air/fuel sensor controller gauges are a great option! Built on the unique, patent-pending X-Digital technology, they report accurate information quickly— enabling you to tune your engine more efficiently. These gauges have modern, visually striking faceplates with 7-segment center displays that are 87 percent larger. They're ultra-slim and come with black bezels and black dual-faced faceplates for air/fuel and Lambda. The displays are user-configurable and feature auto-dimming. Additional features: * Bosch 4.9LSU wideband UEGO sensor * Factory-calibrated resistor does not require free-air calibration—but technology allows for free-air calibration as sensor ages, if user desires * Compatible with vehicle/system voltages up to 16 V * 0-5 V and RS232 output for data-logging and feedback control * AEMnet (CANbus) for data-logging and daisy-chaining multiple controllers up to 16 cylinders * Can display AFR values in hundredths of a percent * 52mm gauge diameter and slim 0.825 in. gauge depth * Gauge cup depth only .200 in. deep * Locking connectors
( 210 )
$279.95
$251.95
On Sale
Keep an eye on your exhaust gas temperature with a state-of-the-art AEM Electronics X-Series EGT gauge. You'll have the ability to program alarm thresholds that alert you right away if something is wrong. The larger LED display is bright and easy to see on the larger yet slimmer housing; and mounting is easy. Additional features: * Programmable LED is 87 percent larger than original AEM gauges * 24 green outer LEDs for quick reference to engine parameters * Peak/recall via gauge face buttons * AEMnet CAN bus-enabled for transmitting data to EMS or data-logger * 0-5 V analog outputs for transmitting data to EMS or data-logger * Auto-dimming sensor delivers ideal display brightness * Positive locking connectors provide secure connection * Optional silver bezel with white faceplate accessory kit available (sold separately)
( 1 )
$326.95
$294.25
On Sale
Holley's incredible line of digital precision gauges with an analog-look includes Holley GPS speedometers. They're offered in 3 3/8 in. and 4 1/2 in. diameter versions, with black or white face. You won't find a better GPS-based speedometer on the market. No connection to the transmission is required, so they're a breeze to install. In addition to mph, they show quarter-mile time; 0-60 mph time; mileage/trip odometer; direction; and time of day. Additional GPS speedometer details: * GPS antenna with a 15 ft. long cable allows you to place the antenna in the most convenient location—nearly anywhere in or on the vehicle * Hot-start feature means that the GPS is usually displaying speed data within 2-3 seconds of power-up * Compatible with Holley EFI touch screens, dashes, hand-held tuners, and other CAN devices * 240-degree sweep pointer from 8 to 4 o'clock makes them easy to read at a glance * Internal microprocessor ensures accurate pointer movement in street and racing conditions * Spin-lock ring threads to the back of the gauge case for simple and secure mounting * CNC-machined billet aluminum bezels with anodized finish—threaded for easy replacement
( 15 )
$399.95
—
$476.95
$359.95
—
$428.95
On Sale
AEM Electronics X-Series pressure gauges display exceptional looks, increased readability, and a multitude of features. Easier to read, mount, and use, they are a must-have for accurate diagnostic, oil, and boost pressure readouts in your high performance vehicle. Features include: * Reversible black face (psi/BAR) and black bezel * Optional silver bezel with black/white faceplate accessory kit available (sold separately; see Suggested Parts tab) * 2 1/16 in. (52mm) gauge diameter for easy mounting in gauge pods * Slim 0.825 in. overall gauge depth and 0.200 in. cup depth—mount them virtually anywhere! * Programmable center LED is 87 percent larger than original AEM gauges * 24 green outer-edge LEDs offer quick reference to engine parameter * User-selectable standard or metric display (PSI/BAR) * Peak/Recall via gauge face buttons * User-selectable threshold warnings * AEMnet CANbus-enabled for transmitting data to EMS or data-logger * 0-5 V analog outputs for transmitting data to EMS or data-logger * Auto-dimming sensor delivers ideal display brightness * Positive locking connectors provide secure connection
( 33 )
$308.95
$278.05
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
