Availability
Showing In Stock Items. Show All 91 Items.
Fel-Pro rear main seals are ideal for stock rebuilds or street driven cars and trucks. These OEM-style replacement seals are not intended for race applications. They're available in a variety of materials and configurations for fitment on specific vehicles and engine families.
( 166 )
$16.99
—
$29.99
Sealing valve covers can often be a big challenge, but trust Trick Flow® to get that one handled. Trick Flow® valve cover gaskets are one-piece designs made to eliminate potential leak paths and they have specially chosen high-temperature coatings to prevent leakage. The sealing itself is done with a reliable, temperature-resistant composition. Some gaskets have a tough steel core that gives extra rigidity to resist pressure and vacuum. On top of that, these gaskets are extra-thick to resist crushing. That also gives you a little extra clearance between the valvetrain and the valve cover.
( 8 )
$57.99
Fel-Pro Performance PermaTorque MLS head gaskets are proven to handle big power any way you can make it. They're designed to maintain contact pressure between the cylinder head and block during the dynamics of engine operation. PermaTorque gaskets can seal combustion, oil, and coolant despite extreme horizontal and vertical motion between the cylinder head and block. Engines with open deck surfaces, numerous cooling passages, and relatively few head fasteners will greatly benefit from Fel-Pro performance PermaTorque MLS head gaskets. For replacement or upgrade, order the model recommended for your specific vehicle and engine application.
( 169 )
$54.99
—
$58.99
Mahle Original rear main seals are high-quality rear main seals designed to replace your factory seals. They are constructed from high-quality materials to meet or exceed OE standards and are designed to provide long-lasting durability and performance. If you're looking for high-quality replacement seals for your vehicle, Mahle Original rear main seals are your solution.
( 25 )
$12.99
—
$35.99
The leak stops here! Cometic MLX head gaskets feature a unique integrated "stopper" layer for optimum combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. The MLX head gaskets, like their MLS counterparts, are multi-layer stainless steel for increased strength—and require no sealants or re-torquing. Dozens of models are available; order the MLX head gaskets designed to maximize your engine's power and performance.
( 18 )
$113.84
—
$177.74
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 541 )
$25.99
—
$63.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 542 )
$101.37
—
$235.73
Forged in the fires of high performance engines, Fel-Pro Performance head gaskets are quite literally created to tame the fiery combustion chambers of up to 1,000 hp engines. Reinforced with KEVLAR® fiber and engineered to give you a perfect seal that can withstand combustion pressures of 1,500 to 3,000 psi, these gaskets are bred for high performance. They have a conformable anti-stick coating—and are constructed with pre-flattened copper or steel rings for easy installation, while also giving them the strength to tame your beastly powerplant. The anti-stick coating ensures easy removal and cleanup on frequent rebuilds, but also aids in micro-sealing minor surface irregularities. When rebuilding your engine, use the parts you wish were in it to begin with. Put a set of Fel-Pro Performance head gaskets in that engine—not only to help it perform better today, but to make your next engine project that much easier.
( 635 )
$70.99
Fel-Pro PermaDry valve cover gaskets are recommended for stock replacement use. Their shape, thickness, and construction varies with each engine application. In addition to tried-and-true materials such as cork and rubber, advances in gasket technology have also been incorporated into molded silicone seals for leak-free performance. Simply match up your vehicle's make and model year with the Fel-Pro PermaDry valve cover gaskets designed for precise fitment. Note that these gaskets are not intended for race applications.
( 382 )
$41.99
Fel-Pro PermaTorque MLS head gaskets provide the robust seal needed to contain peak combustion pressures and temperatures—and to withstand the significant casting motion encountered in many of today's automotive engines. The gaskets feature multiple layers of steel, precisely engineered sealing beads, and advanced polymer coatings to maintain a proper contact pressure between the cylinder head and block. Unlike other multi-layer steel head gaskets, PermaTorque MLS seals also include a proprietary blue aftermarket coating that accommodates a wider range of surface finishes. These gaskets are manufactured using precision tooling to ensure exact sealing bead location and profile. Order the model recommended for your specific vehicle and engine application.
( 86 )
$50.99
—
$204.99
Ford Performance Parts cylinder head changing kits include multi-layer steel head gaskets and high-strength torque-to-yield head bolts. They make changing the cylinder heads on your Ford engine significantly easier and are highly recommended when installing Ford Performance Parts cylinder heads.
( 19 )
$117.99
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Note, however, that these gaskets are not intended for race applications.
( 252 )
$39.99
Fel-Pro throttle body gaskets are available in a dozen materials and hundreds of configurations. Whether you're performing a rebuild or general maintenance, these replacement seals will deliver the tight connection you need. Order the gaskets recommended for your vehicle and engine application.
( 35 )
$4.99
—
$10.99
Keep your performance engine sealed properly with Summit Racing™ oil pan gaskets. Built from high-quality materials, these gaskets will maintain a leak-free seal for your oil pan.
( 115 )
$23.99
Fel-Pro conversion set gaskets are ideal for stock rebuilds or street-driven cars and trucks. They include every seal necessary for lower engine work. When combined with a Fel-Pro head set, conversion sets can be used for a complete overhaul. Order the gaskets designed for fitment with your engine type and designation.
( 80 )
$53.99
—
$137.99
Stop dripping oil with these Dorman valve cover gaskets. They are manufactured from high-quality materials to help seal the valve cover to the cylinder head. Available for a variety of engines and configurations, these Dorman valve cover gaskets are an excellent choice for your OEM rebuild.
( 18 )
$119.99
—
$188.99
No leaks, no problems! Mahle Original timing cover gaskets deliver a perfect fit for a wide range of auto, truck, van, and SUV applications. They're available in a variety of materials and configurations for specific vehicles. The gaskets feature an OE design that meets or exceeds factory specs—and are offered individually or in timing cover seal kits.
( 18 )
$25.99
—
$30.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 22 )
$147.99
—
$782.99
Fel-Pro valve stem seals are available in a variety of sizes, styles, and materials. These small components perform a valuable role—controlling the lubrication of the valve stems as they slide in the valve guide. Too little oil causes stem and guide wear; too much increases oil consumption and can cause a buildup of carbon. This can lead to valve seat damage and early valve grind. Order the replacement set recommended for your vehicle and engine application.
( 107 )
$22.99
—
$68.99
ACDelco designs their high-quality crankshaft front seals to fit various radial shafts and seal in engine oil while keeping dirt and water out. Featuring synthetic rubber or plastic composite materials, these engine seals conform to the rotating crankshaft sealing surface to help provide leak-free operation. The OE-style replacements provide the same fit and performance you expect from all General Motors parts. They're available in models for virtually any vehicle on the road today.
( 21 )
$4.99
—
$17.99
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 370 )
$97.99
—
$475.99
Dorman oil pan drain plug gaskets are high-quality replacements to eliminate messy leaks. They're available in a wide variety of materials and sizes for specific vehicle applications. Order these seals individually or in larger quantity sets. Why endure oil drips in the driveway? Install a new drain plug gasket and keep the lubricant where it belongs.
( 22 )
$3.99
—
$19.99
Fel-Pro offers a wide selection of gaskets, along with other engine sealing components for high performance vehicles and everyday cars, trucks, and SUVs. Their oil filter adapter gaskets are available in a variety of materials and configurations for OE-style fitment. Order the replacement seals recommended for your vehicle and engine application.
( 16 )
$9.99
Trick Flow® valve seals are posi-stop seals made from Viton® fluoroelastomer for a long-lasting seal. They prevent oil from leaking into the valve guides and are good for use with dual springs.
( 36 )
$1.99
—
$8.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
