Availability
Showing In Stock Items. Show All 152 Items.
Summit Bucks
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 8 )
$66.99
BTR multi-layer head gaskets are high-quality gaskets that guarantee a leak-free seal. A blown out head gasket can lead to all sorts of issues. Choose from the variety of BTR head gaskets to make your engine project a success.
( 9 )
$65.99
—
$99.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 547 )
$51.84
—
$108.57
Forged in the fires of high performance engines, Fel-Pro Performance head gaskets are quite literally created to tame the fiery combustion chambers of up to 1,000 hp engines. Reinforced with KEVLAR® fiber and engineered to give you a perfect seal that can withstand combustion pressures of 1,500 to 3,000 psi, these gaskets are bred for high performance. They have a conformable anti-stick coating—and are constructed with pre-flattened copper or steel rings for easy installation, while also giving them the strength to tame your beastly powerplant. The anti-stick coating ensures easy removal and cleanup on frequent rebuilds, but also aids in micro-sealing minor surface irregularities. When rebuilding your engine, use the parts you wish were in it to begin with. Put a set of Fel-Pro Performance head gaskets in that engine—not only to help it perform better today, but to make your next engine project that much easier.
( 637 )
$51.99
—
$105.99
Chevrolet Performance composition head gaskets are recommended for stock and mildly modified engines. They're available in a variety of bores, compressed thicknesses, and volumes for fitment on specific vehicle and engine applications.
( 119 )
$59.99
—
$63.99
Common symptoms of poor intake manifold gasket sealing may include leaks, rough idling, and stumbling. For your next engine build, use Mahle Original intake manifold gaskets to seal your engine up tight! It's a known fact—proper sealing is vital to create maximum horsepower within the engine, and these gaskets will allow you to achieve a good, positive seal. They utilize premium materials and are precisely designed to match OE quality, fit, form, and function. Order the intake manifold gasket designed for fitment on your particular vehicle by Mahle Original, one of the most trusted names in professional sealing solutions for engines and exhaust.
( 99 )
$53.99
—
$106.99
Chevrolet Performance LS1/LS6 cylinder head gasket kits ensure a good seal for your heads. They're designed to prevent coolant and oil leakage.
( 63 )
$93.85
Our Summit Racing™ cam-change gasket sets have all the gaskets and seals you need to make the job easier. They include gaskets for the valve covers, oil pan, fuel pump, water pump, intake manifold, and timing cover, as well as a seal for the timing cover.
( 57 )
$50.99
No leaks, no problems! Mahle Original timing cover gaskets deliver a perfect fit for a wide range of auto, truck, van, and SUV applications. They're available in a variety of materials and configurations for specific vehicles. The gaskets feature an OE design that meets or exceeds factory specs—and are offered individually or in timing cover seal kits.
( 18 )
$61.99
Moroso oil pan gaskets offers race-quality, reinforced, and available for many popular engine applications. So, if you're tired of your car marking its territory in your garage or driveway, give one of these Moroso oil pan gaskets a try!
( 141 )
$63.99
—
$105.99
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 45 )
$51.99
—
$102.99
Get your vehicle's timing in check using one of these Summit Racing™ LS2 timing chain and accessory kits. They include a timing chain set, crankshaft bolt, timing cover gasket, and valve cover gasket sets. You'll be able to freshen up your timing system with all of the necessary components. Order the model recommended for your year/make and engine application.
( 8 )
$105.96
Summit Bucks
ACDelco GM Genuine Parts intake manifold gaskets include the necessary parts to seal your intake manifold to the cylinder head's intake ports. They help prevent the loss of fuel/air mixture from the intake manifold and help prevent dirt/debris from entering the engine and intake ports. These intake manifold gaskets are manufactured from a high grade rubber and are GM recommended replacements for your vehicle's original component. GM Genuine Parts intake manifold gaskets have been made to provide you with the performance, durability, and service life you have come to expect from General Motors.
( 31 )
$63.99
—
$99.99
Chevrolet Performance one-piece oil pan gaskets can eliminate troublesome leaks and keep your performance engine properly sealed. Made from neoprene polymers, the one-piece gaskets replace 4-piece factory designs for a more effective seal. Order the model recommended for your engine application.
( 9 )
$89.99
These Summit Racing™ rear main seal housings are the correct aluminum housing for Chevrolet 1-piece rear main seals. Whether you're replacing a damaged housing or building a project from scratch, these high quality housings will assure an easy installation.
Not Yet Reviewed
$79.99
Chevrolet Performance has the official parts that your classic vehicle needs to keep it in pristine condition, including these head gaskets, which offer a precision fit between the cylinder head and header to improve exhaust flow. These head gaskets feature durable quality construction to maintain a reliable seal under high pressure and temperature changes. Whether you're installing a new set of heads or are just reinstalling your stock factory manifolds, add Chevrolet Performance head gaskets to ensure a precision fit and a tight, leak-free seal.
( 26 )
$78.99
—
$96.99
Fel-Pro intake manifold gaskets are designed to be replacements for stock-type intake gaskets. This means they're ideal for stock rebuilds, as well as mild performance engines. The seals are available in a variety of configurations for fitment on hundreds of engine applications.
( 500 )
$58.99
—
$110.99
Fel-Pro Performance PermaTorque MLS head gaskets are proven to handle big power any way you can make it. They're designed to maintain contact pressure between the cylinder head and block during the dynamics of engine operation. PermaTorque gaskets can seal combustion, oil, and coolant despite extreme horizontal and vertical motion between the cylinder head and block. Engines with open deck surfaces, numerous cooling passages, and relatively few head fasteners will greatly benefit from Fel-Pro performance PermaTorque MLS head gaskets. For replacement or upgrade, order the model recommended for your specific vehicle and engine application.
( 169 )
$83.99
—
$112.99
MSD AirForce Manifold LS seal port kits offer the perfect fit and performance. Whether you've misplaced or accidentally damaged your originals, these MSD premium rubber seals will get you back on track to making power!
( 5 )
$85.99
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 19 )
$70.82
—
$129.72
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like these Cometic MLS exhaust gaskets. They are constructed from multiple layers of strong stainless steel that has excellent rebound ability and corrosion-resistant characteristics. Outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. Cometic MLS exhaust gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 32 )
$87.95
Use Holley intake manifold gaskets for the reliable sealing of your manifold. They are made using popular materials and construction styles, such as composition and Kormetal, for many popular engines.
( 7 )
$57.29
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 453 )
$90.95
Cometic valve cover gaskets are made from aramid fiber. This is a premium high-temperature, high-density, creep-resistant material that is fuel-resistant and asbestos-free. These gaskets require no retorquing or additional sealant. If you want a dependable seal, go with Cometic Gasket valve cover gaskets.
( 70 )
$51.11
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
