Availability
Showing In Stock Items. Show All 146 Items.
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 542 )
$85.48
—
$235.73
Edelbrock intake manifold gaskets offer precise sealing to make more power! Properly sealing an engine is vital to making maximum horsepower, and these intake gaskets will allow for optimum flow and performance. Edelbrock synthetic fiber composite gaskets are impervious to most chemicals, and when compressed, will conform to any imperfections on the sealing surface. Produce maximum power with the maximum sealing of Edelbrock intake manifold gaskets.
( 448 )
$28.95
—
$257.95
Fel-Pro water neck gaskets are available for hundreds of applications, including most engine coolant outlets and thermostat housings. These inexpensive seals are offered in a variety of materials and configurations. Avoid unwanted leaks. Order the gaskets recommended for your vehicle and engine family.
( 270 )
$2.99
—
$12.99
Edelbrock's performance CRC (core-reinforced-composite) valve cover gaskets' multi-layer construction consists of two highly compressible, high-rubber content, fiber-reinforced outside layers chemically bonded to a high-strength composite core. This unique core-reinforced construction provides excellent sealing integrity and conformability for easy installation, as well as radial strength to resist high-vacuum or blowout conditions.
( 221 )
$22.95
—
$37.95
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 541 )
$10.99
—
$20.99
Fel-Pro water pump gaskets are offered in a variety of materials and configurations. These replacements are available for thousands of applications. Order the model or set recommended for fitment with your vehicle and engine family.
( 158 )
$3.99
—
$7.99
Fel-Pro offers fuel pump gaskets for thousands of applications. These economical replacements are available in a variety shapes and materials. Order the model recommended for your vehicle and engine family.
( 93 )
$2.99
—
$3.99
Fel-Pro valve stem seals are available in a variety of sizes, styles, and materials. These small components perform a valuable role—controlling the lubrication of the valve stems as they slide in the valve guide. Too little oil causes stem and guide wear; too much increases oil consumption and can cause a buildup of carbon. This can lead to valve seat damage and early valve grind. Order the replacement set recommended for your vehicle and engine application.
( 107 )
$12.99
—
$19.99
Unwanted engine noise and fumes under the hood can often be traced to poor seals. Fel-Pro offers an extensive line of replacement gaskets to provide a leak-free connection between your intake and exhaust manifolds. Designed for OE-style fitment on hundreds of specific makes/models, the gaskets are crafted from top-quality materials, such as steel core laminate and compressed fiber laminate. Order the gasket configuration to match your exhaust manifold specs.
( 193 )
$8.99
On Sale
Mr. Gasket Ultra-Seal exhaust gaskets are designed and constructed to improve the sealing of exhaust header flanges. Unlike standard exhaust gasket material, Ultra-Seal gaskets incorporate a graphite-impregnated facing and a steel-expanded metal core that reinforces and increases their tensile strength. This allows the gaskets to conform to warped flanges, giving them better sealing capabilities without deteriorating or cracking under the excessive heat and pressure that's common in exhaust systems. Ultra-Seal gaskets are available for a wide range of port styles and sizes. Additional features and benefits: * Expanded steel core provides stability and maximum torque retention to eliminate gasket failure * Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head * High-recovery material allows header or manifold flange to stay sealed if flange loses clamp-load * Can be trimmed for modified port applications * Designed for OE replacement, high performance street, drag race, road racing, and oval track use
( 173 )
$34.51
Fel-Pro rear main seals are ideal for stock rebuilds or street driven cars and trucks. These OEM-style replacement seals are not intended for race applications. They're available in a variety of materials and configurations for fitment on specific vehicles and engine families.
( 166 )
$12.99
—
$13.99
On Sale
Mr. Gasket aluminum layered exhaust gaskets are reusable header or manifold seals that conform to surface irregularities and warped flanges. They will not shrink, deteriorate, or blow out. They're available for a wide variety of port styles and sizes. Features include: * Manufactured from 0.125 in. "dead soft" aluminum layers * Compresses to .060 in. to create a tight, leak-proof seal * Can withstand intense exhaust heat * Resists deterioration * Easy removal * For high performance street, drag race, road racing, and oval track use
( 60 )
$46.39
Fel-Pro offers distributor base gaskets for thousands of applications. They're available in a variety of materials to complement cast iron and aluminum intake manifolds. The gaskets can be used in conjunction with any shins or housing base spacers made to correct the distributor's overall height. Order the replacement model recommended for your vehicle and engine family.
( 42 )
$1.99
Edelbrock cylinder head gaskets provide the best sealing solution for your engine. Edelbrock relies on industry-leading manufacturers to ensure their head gaskets will provide optimum fit and sealing properties when used with Edelbrock cylinder heads. These replacement gaskets are machined from high-density materials to precise specs--for applications from the 1940s and up.
( 56 )
$61.95
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like these Cometic MLS exhaust gaskets. They are constructed from multiple layers of strong stainless steel that has excellent rebound ability and corrosion-resistant characteristics. Outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. Cometic MLS exhaust gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 31 )
$42.35
—
$44.59
These Mr. Gasket thermostat housing and water outlet gaskets provide a great seal for your stock application. They are available to fit most applications and offer a quality seal you can count on.
( 52 )
$6.89
—
$34.51
The leak stops here! Cometic MLX head gaskets feature a unique integrated "stopper" layer for optimum combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. The MLX head gaskets, like their MLS counterparts, are multi-layer stainless steel for increased strength—and require no sealants or re-torquing. Dozens of models are available; order the MLX head gaskets designed to maximize your engine's power and performance.
( 18 )
$113.09
—
$148.43
On Sale
Mr. Gasket MLS (multi-layered steel) head gaskets are ideal for all engines. Each gasket is made with high-grade materials and manufactured with the latest cutting-edge technology for the tight tolerances that quality engine builders rely on. These MLS gaskets consist of high-grade layers of stainless steel that are tempered to relax stress for proper torque retention. Plus, each multi-layered sheet is layered with a premium polymer coating that's resistant to oxidation and chemicals. Choose Mr. Gasket MLS head gaskets for any engine and any combination.
( 1 )
$111.95
$61.95
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 540 )
$59.99
—
$83.99
Flowtech offers replacement header gaskets for a variety of applications. These gaskets are engineered for a precise, easy fit, and manufactured from P73 Ferroglass non-asbestos facing material for long life. Flowtech replacement header gaskets are mechanically clinched to a perforated metal core for superior sealing and strength. The inorganic filler system provides strong bolt torque retention properties.
( 26 )
$20.06
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 18 )
$71.67
—
$107.50
No leaks, no problems! Mahle Original timing cover gaskets deliver a perfect fit for a wide range of auto, truck, van, and SUV applications. They're available in a variety of materials and configurations for specific vehicles. The gaskets feature an OE design that meets or exceeds factory specs—and are offered individually or in timing cover seal kits.
( 18 )
$5.99
With their built-in integral combustion and coolant seals, patented SCE ICS Titan copper self-sealing head gaskets require no additional sealants. That means that you get user-friendly installation, combined with reliable fluid sealing, plus the unbeatable strength of solid copper gaskets. The fluid seals are bonded to both sides of the gaskets and cleverly offset to allow the annealed copper of the gaskets to deform around them for a better seal and to prevent blowout. The built-in combustion seals, found only on the ICS Titan gaskets, take the place of the O-ringed blocks or heads, allowing for the use of power adders or extreme static compression ratios. The gasket body is split at the bore opening to allow for the insertion of a stainless wire O-ring, forming a primary seal, with upper and lower flanges forming a secondary combustion pressure seal. Recommended for naturally aspirated gas or methanol racing engines, these one-of-a-kind copper ICS Titan head gaskets are suitable for medium-to-heavy turbocharged, blown, or nitrous-injected engines as well. For ultimate sealing strength every time, introduce your engine to SCE ICS Titan copper head gaskets.
( 8 )
$136.07
—
$216.43
Fel-Pro air cleaner gaskets are designed to fit between your air cleaner and carburetor or TBI. They create a positive seal that will help prevent unfiltered air from entering your engine. Order the replacement gasket recommended for your vehicle and engine application.
( 62 )
$2.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
