Availability
Showing In Stock Items. Show All 41 Items.
ACDelco offers rear main seal housings for a wide range of year/make and engine applications. The one-piece aluminum replacements are designed, engineered, tested, and backed by General Motors. They are validated OE parts for specific Chevrolet, Buick, GMC, and Cadillac vehicles. These components are designed to give the engine oil leak protection from between the crankshaft output flange and the engine block. Order the engine crankshaft seal housing recommended for your ride.
( 7 )
$65.99
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 542 )
$50.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 543 )
$85.48
—
$103.89
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 539 )
$76.99
—
$103.99
ACDelco GM Genuine Parts oil pan gaskets are genuine parts that will provide the same performance, durability, and service life as the factory originals. Choosing the best quality to maintain your GM vehicle is easy--ACDelco GM Genuine Parts has the right fit, function, and form for confident, hassle-free service.
( 4 )
$54.99
No leaks, no problems! Mahle Original timing cover gaskets deliver a perfect fit for a wide range of auto, truck, van, and SUV applications. They're available in a variety of materials and configurations for specific vehicles. The gaskets feature an OE design that meets or exceeds factory specs—and are offered individually or in timing cover seal kits.
( 18 )
$55.99
Ford Performance Parts performance cylinder head gaskets minimize blowout and are available in several sizes and thicknesses to accommodate many Ford applications. From "competition" gaskets with solid metallic cores and wire encased combustion chamber seals to gaskets with pre-flatten copper or steel wire combustion rings, genuine Ford cylinder head gaskets will deliver leak-free performance.
( 29 )
$79.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 22 )
$61.99
—
$91.99
On Sale
Mr. Gasket has two different oil pan gasket sets for your needs: Standard and Ultra-Seal. For stock rebuilds, the standard gaskets are just fine, but for high performance applications, the Ultra-Seals are where it's at. The Ultra-Seal oil pan gaskets are designed for today's performance engines that create excessive amounts of vacuum and pressure in the oil pan. They're constructed from a fiber material that features excellent tensile strength and superior blowout resistance.
( 26 )
$68.05
—
$74.25
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 18 )
$67.90
—
$112.71
Cometic Gasket's commitment to cutting-edge technology has produced superior-quality gaskets like these Cometic MLS exhaust gaskets. They are constructed from multiple layers of strong stainless steel that has excellent rebound ability and corrosion-resistant characteristics. Outer layers are coated with a heat-resistant, rubber-based material to create a seal that can withstand a variety of sealing and load conditions and surfaces. Cometic MLS exhaust gaskets are ideal for all types of head and block material and their design promotes an even torque load across the sealing surface, allowing for measurably reduced bore distortion.
( 31 )
$87.95
Edelbrock cylinder head gaskets provide the best sealing solution for your engine. Edelbrock relies on industry-leading manufacturers to ensure their head gaskets will provide optimum fit and sealing properties when used with Edelbrock cylinder heads. These replacement gaskets are machined from high-density materials to precise specs--for applications from the 1940s and up.
( 56 )
$61.95
—
$113.95
Mr. Gasket Ultra-Seal gasket sets are made of a cellulose/nitrile material that is less compressible for excellent sealing and durability. This material has an anti-stick coating, plus a silicone bead around each intake port, except where noted, for a tight, leakproof seal. These gaskets are the perfect solution for intake-sealing problems associated with the small sealing areas between ports, and the different expansion rates of intake manifolds and cylinder heads. The choice of champions, these sets come complete with all necessary seals and can be trimmed to fit modified ports where needed.
( 72 )
$55.65
—
$56.69
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 370 )
$88.99
—
$115.99
Cometic Street Pro bottom-end gasket sets gather all of the necessary parts in one handy kit, tailored to specific years/makes/models. Rebuilding or servicing an engine can be quite an ordeal--trying to locate all of the correct gaskets, seals, washers, and O-rings for the many sections. If the fit isn't perfect, you know the messy results.There's no need for you to hunt down replacement seals for oil pans, water pumps, pickup tubes, cranks, drains, timing covers, retainers... you get the picture. Match up your vehicle with the corresponding Cometic Street Pro bottom-end gasket set and order today!
( 2 )
$69.57
—
$86.96
SCE offers AccuSeal Pro oil pan gaskets for a wide range of vehicles from the 1950s and up. They are available in one or two-piece designs and are made with proprietary processes and materials like steel core laminate, rubber, silicone, PTFE coated, aluminum, and elastomer. The replacement gaskets are engineered to resist heat and seal surface irregularities. Plus, they have built-in crush limiters to prevent damage from over-tightening. For street or strip, order the AccuSeal Pro oil pan gasket recommended for your application.
( 9 )
$50.91
—
$55.29
Keep your oil from escaping with rear main seals from Cometic Gasket. If you have a wet spot on the rear of your oil pan, spots on your driveway, or garage floor, or worse, an oil-covered transmission, then you'd better get rear main seals from Cometic. They are made from heat-resistant, chemical-resistant Viton® material and are available in one and 2-piece seal styles. When you need superior gaskets for your high performance vehicle, Cometic has the gaskets and rear main seals to fit your application.
( 15 )
$82.61
—
$85.54
Edelbrock's performance CRC (core-reinforced-composite) valve cover gaskets' multi-layer construction consists of two highly compressible, high-rubber content, fiber-reinforced outside layers chemically bonded to a high-strength composite core. This unique core-reinforced construction provides excellent sealing integrity and conformability for easy installation, as well as radial strength to resist high-vacuum or blowout conditions.
( 221 )
$55.95
—
$64.95
With their built-in oil and coolant seals, patented SCE Titan copper self-sealing head gaskets require no additional sealants. That means you get user-friendly installation, combined with reliable fluid sealing, plus the unbeatable strength of solid copper gaskets. The fluid seals are bonded to both sides of the gaskets and cleverly offset to allow the annealed copper of the gaskets to deform around them for a better seal, especially in the O-ring combustion-seal area. Recommended for liquid-cooled racing engines with O-rings in the heads or block, these one-of-a-kind copper head gaskets can even be used on street machines with no worries about coolant leaks! For perfect sealing strength every time, introduce your engine to SCE Titan copper head gaskets.
( 6 )
$93.10
—
$125.42
When you need a professional seal, choose SCE AccuSeal Pro valve cover gaskets. These premium replacements are made with proprietary materials and processes to provide you with the seal that you need and expect. They're offered in more than a half-dozen materials and thicknesses, engineered to resist heat and irregularities in sealing surfaces. Do you have cast covers, sheetmetal covers, or an application with severe vibration? Use SCE super-tough AccuSeal Pro gaskets and you won't have to change them every round! Order the model designed for your year/make and engine application—for sealing power and top performance on the street or track.
( 50 )
$54.26
—
$67.96
Cometic AFM intake gaskets are constructed from a chemically blown, compounded nitrile synthetic rubber bonded to an aluminum core. The gasket material has a temperature resistance of over 250 degrees and an 85 percent recovery, while maintaining strong torque retention. Cometic AFM intake gaskets are ideal for machined surfaces, especially uneven stamped surfaces that have been plated. AFM intake gaskets retain torque and require no additional sealers.
( 26 )
$65.21
Don't forget to change your gasket when you change your timing chain or cam. These gaskets are designed to provide a reliable seal for your timing chain cover. Made from high grade cork granules and a neoprene binder, these gaskets will not shrink or stick and provide excellent sealing and durability.
( 7 )
$72.55
The name pretty much explains it all. Mr. Gasket engine rebuilder overhaul gasket sets are designed specifically to rebuild stock engines. These overhaul sets contain all the gaskets and seals required to rebuild today's engines. That means gaskets and seals for the cylinder heads, intake and exhaust manifolds, timing cover, fuel pump, crankshaft, oil pump, valve covers, and any other essential components. They're available in Ultra-Seal and Solicor styles.
( 8 )
$92.29
On Sale
When you change a cam, you don't need a complete engine gasket set, because you don't have to take everything apart. Mr. Gasket cam change gasket sets are tailored to deliver just the pieces that you need when you swap bump-sticks. They include gaskets for the valve covers, intake manifold, oil pan, water pump, timing-chain cover, and fuel pump.
( 13 )
$72.55
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
