Availability
Showing In Stock Items. Show All 54 Items.
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 370 )
$100.99
—
$318.99
SCE AccuSeal Pro rear main seals are made from top-quality Viton® material known for its excellent heat and chemical resistance. These one- or two-piece replacements are available for a wide range of vehicles from the 1950s and up. Count on SCE AccuSeal Pro rear main seals for dependable, leak-free performance!
( 11 )
$113.47
—
$114.33
Cometic Gasket Street Pro top-end gasket kits bring race-proven MLS technology to the budget-minded hot rod guy or gal. The multi-layer steel gasket is their commitment to cutting-edge technology and producing superior-quality gaskets. Street Pro gasket kits are constructed from multiple layers of stainless steel for its strength, along with excellent rebound and corrosion-resistant characteristics. The outer layers are coated with a rubber-based material to create a superior, heat-resistant seal that can withstand extreme cylinder pressures. Cometic gaskets are ideal for everything from aluminum heads to cast iron or aluminum blocks. Street Pro gaskets offer top-end quality that you can afford.
( 6 )
$150.31
—
$278.31
For the majority of vehicles, Cometic gives you the economical option of ordering either the top-end or bottom-end gasket sets--and if you want a complete kit, you just have to order one of each. However, some engines, such as the Subaru EJ series, may require full replacement, Street Pro gasket kits are available with every gasket or seal you could possibly need when doing any level of engine work. That includes head gaskets, valve cover gaskets, spark plug O-rings, intake manifold gaskets, and more. If you're rebuilding a motor, or just like to have an assortment of replacement gaskets and seals on hand, these kits offer the most value for your dollar.
Not Yet Reviewed
$179.21
—
$243.65
Not all solid copper gaskets are created equal. SCE uses premium 99 percent pure copper sheets that are precisely rolled to our specifications and tested for uniform flatness to assure precise cylinder head-to-block alignment and eliminate uneven loading. After processing, each gasket is annealed to ensure optimum mating and provide measurable gains in cylinder sealing, as evidenced by lower leak-down percentages. O-ringing is recommended. Pro Copper gaskets are available in many bore and thickness combinations to suit your performance needs.
( 18 )
$100.39
—
$201.49
Cometic Street Pro bottom-end gasket sets gather all of the necessary parts in one handy kit, tailored to specific years/makes/models. Rebuilding or servicing an engine can be quite an ordeal--trying to locate all of the correct gaskets, seals, washers, and O-rings for the many sections. If the fit isn't perfect, you know the messy results.There's no need for you to hunt down replacement seals for oil pans, water pumps, pickup tubes, cranks, drains, timing covers, retainers... you get the picture. Match up your vehicle with the corresponding Cometic Street Pro bottom-end gasket set and order today!
( 2 )
$109.47
—
$259.85
When you need a professional seal, choose SCE AccuSeal Pro gaskets. These premium gaskets are made with proprietary materials and processes to provide you with the seal that you want, need, and expect. These AccuSeal Pro intake gaskets feature silicon bead seals with one third of the clamp load of other brands, making them handy on angle-milled heads! Get the sealing power needed for the top performance of your race or street engine with SCE AccuSeal Pro gaskets.
( 47 )
$184.40
—
$184.44
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 540 )
$100.99
—
$264.99
Fel-Pro conversion set gaskets are ideal for stock rebuilds or street-driven cars and trucks. They include every seal necessary for lower engine work. When combined with a Fel-Pro head set, conversion sets can be used for a complete overhaul. Order the gaskets designed for fitment with your engine type and designation.
( 80 )
$100.99
—
$249.99
Fel-Pro Performance full engine gasket sets keep your mill sealed under the most grueling racing conditions, from oval tracks to dragstrips and off-road. These top-quality sets include all of the premium gaskets and seals you'll need to assemble or rebuild a performance engine. Order the kit recommended for your year/make and engine application. Additional details: * Meets or exceeds all OE specifications * Application-specific design to ensure a perfect fit * Engineered for the sealing repair environment * Unsurpassed quality you can trust * Validated for fit, form, and function
( 50 )
$103.99
—
$190.99
Fel-Pro PermaTorque MLS head gaskets provide the robust seal needed to contain peak combustion pressures and temperatures—and to withstand the significant casting motion encountered in many of today's automotive engines. The gaskets feature multiple layers of steel, precisely engineered sealing beads, and advanced polymer coatings to maintain a proper contact pressure between the cylinder head and block. Unlike other multi-layer steel head gaskets, PermaTorque MLS seals also include a proprietary blue aftermarket coating that accommodates a wider range of surface finishes. These gaskets are manufactured using precision tooling to ensure exact sealing bead location and profile. Order the model recommended for your specific vehicle and engine application.
( 86 )
$105.99
—
$206.99
Fel-Pro Performance marine head set gaskets include all of the seals needed for a valve grinding job on your marine application—such as cylinder head gaskets, valve cover gaskets, intake and exhaust manifold gaskets, and valve stem seals. These direct-fit replacement components are made from top-quality materials, and are designed for specific marine engines. Maintain your equipment with performance gaskets from the industry leader: Fel-Pro.
( 63 )
$126.99
—
$203.99
Forged in the fires of high performance engines, Fel-Pro Performance head gaskets are quite literally created to tame the fiery combustion chambers of up to 1,000 hp engines. Reinforced with KEVLAR® fiber and engineered to give you a perfect seal that can withstand combustion pressures of 1,500 to 3,000 psi, these gaskets are bred for high performance. They have a conformable anti-stick coating—and are constructed with pre-flattened copper or steel rings for easy installation, while also giving them the strength to tame your beastly powerplant. The anti-stick coating ensures easy removal and cleanup on frequent rebuilds, but also aids in micro-sealing minor surface irregularities. When rebuilding your engine, use the parts you wish were in it to begin with. Put a set of Fel-Pro Performance head gaskets in that engine—not only to help it perform better today, but to make your next engine project that much easier.
( 635 )
$106.99
—
$142.99
Fel-Pro Performance PermaTorque MLS head gaskets are proven to handle big power any way you can make it. They're designed to maintain contact pressure between the cylinder head and block during the dynamics of engine operation. PermaTorque gaskets can seal combustion, oil, and coolant despite extreme horizontal and vertical motion between the cylinder head and block. Engines with open deck surfaces, numerous cooling passages, and relatively few head fasteners will greatly benefit from Fel-Pro performance PermaTorque MLS head gaskets. For replacement or upgrade, order the model recommended for your specific vehicle and engine application.
( 169 )
$102.99
—
$133.99
OEM replacement Fel-Pro head gaskets are ideal for stock rebuilds on street-driven cars and trucks. These seals are available in a dozen materials, with different bores, thicknesses, and compressed volumes. They're designed for precise fitment on specific engine applications. (Fel-Pro head gaskets are not intended for racing use.)
( 252 )
$101.99
—
$225.99
Are you working on a marine engine? You may find that all of the gaskets and seals that you need for certain jobs are not contained in typical gasket sets. Fel-Pro Performance marine gasket sets cover those situations. They include the seals not found in head sets, including replacements for the oil pan, water pump, timing cover, fuel pump, and rear main seals (depending on the set you order). Order the marine gaskets recommended for your year/make and engine application.
( 45 )
$110.99
—
$197.99
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 541 )
$101.99
Fel-Pro intake manifold gaskets are designed to be replacements for stock-type intake gaskets. This means they're ideal for stock rebuilds, as well as mild performance engines. The seals are available in a variety of configurations for fitment on hundreds of engine applications.
( 497 )
$101.99
—
$178.99
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Now Fel-Pro has developed these PermaDryPlus valve cover gaskets with SpeedFit technology. These gaskets replace the need for RTV and can significantly speed up your install. No more waiting for the RTV to cure and hoping you didn't use too much or too little--- just install, torque to spec and move on to the next job!
Not Yet Reviewed
$140.99
Put an end to intake manifold leaks with a Fel-Pro intake plenum gasket set. Specifically made to address tough sealing issues, the gaskets help to ensure leak-free performance. These replacements meet or exceed OEM specifications and are available for a wide range of vehicle and engine applications.
( 51 )
$154.99
Pro-X top end gasket kits are designed for precise sealing, maximum durability, and optimal engine performance, making them an essential component for motocross, off-road motorcycles, dirt bikes, and ATVs. Manufactured from high-quality materials, these gasket kits provide exceptional heat resistance, superior sealing properties, and long-lasting durability, ensuring leak-free performance and reliable compression. Each Pro-X kit includes all necessary head, base, and exhaust gaskets, as well as valve seals and O-rings, making them a complete solution for top-end rebuilds. Select the kit needed for your powersports ride.
Not Yet Reviewed
$102.99
—
$111.99
Fel-Pro Performance valve cover gaskets are an excellent choice for engines, especially those that produce high horsepower. Fel-Pro performance valve cover gaskets are available in many materials for a variety of applications and needs. When your engine needs new gaskets, look no further than Fel-Pro performance gaskets for the best sealing power.
( 477 )
$101.99
—
$161.99
Pro-X complete gasket kits provide everything needed for a full engine rebuild, ensuring superior sealing, durability, and precision fitment for motocross, off-road motorcycles, dirt bikes, and ATVs. Each kit includes high-quality head gaskets, base gaskets, valve cover gaskets, oil seals, O-rings, and more, delivering a comprehensive package for maximum engine protection. Manufactured from premium, heat-resistant materials, Pro-X gaskets offer exceptional oil and coolant leak prevention, excellent compression retention, and long-lasting performance. Select the kit needed for your powersports ride.
Not Yet Reviewed
$102.99
—
$224.99
Fel-Pro PermaDry valve cover gaskets are recommended for stock replacement use. Their shape, thickness, and construction varies with each engine application. In addition to tried-and-true materials such as cork and rubber, advances in gasket technology have also been incorporated into molded silicone seals for leak-free performance. Simply match up your vehicle's make and model year with the Fel-Pro PermaDry valve cover gaskets designed for precise fitment. Note that these gaskets are not intended for race applications.
( 381 )
$103.99
—
$305.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
