Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
26 Results Found For "controller"
Showing In Stock Items. Show All 33 Items.
Richmond Gear Control Housing Seals
Do you need to replace the seals in your Richmond transmission? No problem--get Richmond Gear control housing seals to keep the oil inside the transmission and protect your shifter arm. They are manufactured from quality materials to prevent leakage. If your seals are damaged, cracked, or hard, you'll need to replace them with Richmond Gear control housing seals to make sure that your transmission is safe from dirt, dust, and other small particles.
( 4 )
$16.99
Manley Viton® Valve Stem Seals
Manley Viton® valve stem seals are designed to keep oil out of the combustion chamber. They are manufactured from special Viton® material for maximum control and durability throughout the entire rpm range. The seals feature a special smaller design to allow for clearance in small inside-diameter valve springs.
( 18 )
$16.37
Fel-Pro Valve Stem Seals
Fel-Pro valve stem seals are available in a variety of sizes, styles, and materials. These small components perform a valuable role—controlling the lubrication of the valve stems as they slide in the valve guide. Too little oil causes stem and guide wear; too much increases oil consumption and can cause a buildup of carbon. This can lead to valve seat damage and early valve grind. Order the replacement set recommended for your vehicle and engine application.
( 111 )
$10.99
—
$19.99
Mahle Original Valve Stem Seals
Mahle Original valve stem seals control the lubrication of the valve stem as it slides into the valve guide. Too little oil contributes to stem and guide wear. Too much oil increases oil consumption and can cause a buildup of carbon, leading to valve seat damage and early valve failure, as well as reduced engine performance and emission failures. Mahle Original valve stem seals ensure dependable performance and superior service life.
( 17 )
$11.99
—
$18.99
Hughes Performance Rear Transmission Seals
These Hughes Performance rear transmission seals are designed to slide over the output shaft of your transmission and maintain oil control. They are manufactured from quality materials to ensure a leak-free seal. Consistent fluid levels lead to reliable performance; pick up one of these Hughes Performance rear transmission seals for maximum durability.
( 6 )
$15.99
Motive Gear Manual Transmission Gasket Sets
Motive Gear offers a variety of manual transmission gasket sets. These replacement seals are ideal for repair or rebuild projects. The value-packed kits include all of the correct configurations for your specific transmission application. All Motive Gear products are engineered and manufactured in state-of-the-art facilities, then undergo rigid quality control tests to ensure proper fit, performance, and longevity.
( 12 )
$10.99
—
$13.99
Motion Pro FI Cleaner Inlet O-Rings
Motion Pro designs and manufactures high-quality cables, specialty tools, and controls for motorcycles, ATVs, and UTVs. These inlet O-rings are replacements for the fuel injector (FI) cleaner tool. They're made of PTFE material and are chemical-resistant to withstand cleaning fluids and gasoline. Sold as a package of 10.
Not Yet Reviewed
$11.99
Engine Works Viton© Valve Stem Seals
Engine Works Viton© valve stem seals are available in a variety of diameters to ensure proper fit and performance. These replacements allow a controlled amount of oil to lubricate the valve stem as it moves in the valve guide. Too little oil causes stem and guide wear; and too much oil causes carbon buildup—leading to valve seat damage, decrease in efficiency, increased emissions, catalytic converter degradation, and excessive oil consumption. These problems can also cause issues with compression, resulting in poor combustion and power loss. Valve stem seals should generally be replaced every 150,000 miles or less. Viton© (synthetic rubber and fluoropolymer elastomer) seals are the best choice to maintain your vehicle.
( 1 )
$13.71
Remflex Wastegate Gaskets
Protection for your turbocharger and engine should include high-quality wastegate gaskets from Remflex. Your turbo wastegate is a boost-controlling device that limits the flow of exhaust gasses—thus limiting the speed of your turbine and the maximum boost pressure. So, if your gaskets fail you could have a problem. Remflex gaskets are cut from 100 percent flexible graphite—not composite materials and rubber—and can withstand up to 3,000 degrees F. They won't burn out, shrink, or leak! These gaskets will seal warped flanges and never need re-torquing. Avoid problems and keep your wastegate operation at optimum levels with Remflex gaskets.
( 1 )
$13.59
—
$14.39
Fel-Pro Differential Cover Gaskets
Vehicles manufactured after 1990 often have differential housings sealed with RTV silicone. Over time, extreme vehicle vibration and even rough roads can cause the RTV bead to break. If the bead breaks and the vehicle loses the axle lube, the transmission gears begin to rub and wear. That's the whining sound that you hear. Unfortunately, it's a repair that needs immediate attention. Fel-Pro offers precut differential replacement gaskets for these applications, so you won't have to worry about applying RTV and waiting for it to set up to seal. These gaskets are available in a variety of materials, thicknesses, and configurations for precise fitment on nearly 70 differential case designs. Order the model recommended for your application—and eliminate the need for messy RTV sealant.
( 233 )
$10.99
Fel-Pro PermaDry Valve Cover Gaskets
Fel-Pro PermaDry valve cover gaskets are recommended for stock replacement use. Their shape, thickness, and construction varies with each engine application. In addition to tried-and-true materials such as cork and rubber, advances in gasket technology have also been incorporated into molded silicone seals for leak-free performance. Simply match up your vehicle's make and model year with the Fel-Pro PermaDry valve cover gaskets designed for precise fitment. Note that these gaskets are not intended for race applications.
( 389 )
$17.99
—
$18.99
Mahle Original Thermostat Housing and Coolant Outlet Gaskets
Get new thermostat housing or coolant outlet gaskets from Mahle Original for your custom, repair, or restoration project. They're made of high-quality materials to ensure a leak-free seal and available for a variety of applications to meet your needs. Don't take chances with a second-rate component--order the Mahle Original thermostat housing and coolant outlet gaskets best suited for your ride!
( 4 )
$14.99
Fel-Pro Intake and Exhaust Manifold Gasket Sets
Fel-Pro offers intake and exhaust manifold gasket sets for thousands of applications. The composite seals are ideal for stock rebuilds, as well as mild performance engines. Affordable and effective, these replacement gaskets ensure a leak-free connection and a factory-style fit. Order the model recommended for your vehicle and engine family.
( 25 )
$10.99
ACDelco GM Genuine Parts Camshaft Position Sensors
ACDelco GM Genuine Parts camshaft position sensors are a GM recommended replacement ideal for many vehicles on the road today. They monitor the rotational position of the camshaft(s). These sensors provide a signal to the engine control module, which compares the camshaft position with the crankshaft position to determine ignition and fuel injection timing. GM Genuine Parts camshaft position sensors have been manufactured to provide you with the performance, durability, and service life you expect from General Motors.
( 1 )
$18.99
Chevrolet Performance Valve Stem Seals
These Chevrolet Performance valve stem seals control the lubrication of the valve stem as it slides into the valve guide. Too little oil contributes to stem and guide wear, and too much oil increases oil consumption and can cause a buildup of carbon. This leads to valve seat damage and early valve failure, as well as reduced engine performance and emission failures. These Chevrolet Performance valve stem seals ensure dependable performance and superior service life.
( 5 )
$15.99
Ford Performance Parts Benda Viton® Pinion Seals
Ford Performance Parts Benda Viton® pinion seals were developed by Dave Benda, Materials Control Supervisor at the Ford Sterling Plant, for Ford 9 in. rear axles used in high-speed, high-temperature applications. Made from premium Viton® material, these pinion oil seals provide a reliable barrier against abrasives, corrosive moisture, oil leaks, and other harmful contaminants.
( 11 )
$16.99
Metro Moulded SUPERsoft Individual Weatherstripping Seals
Used by restoration experts across the world, Metro Moulded SUPERsoft individual weatherstripping seals will outperform and outlast any of their competitors. They use only galvanized, corrosion-resistant metal cores, tough, hardened nylon, and rubber formulations that contain no filler materials. Metro seals are designed to match specific applications and are available for a wide variety of applications. Features and benefits of Metro Moulded SUPERsoft seals: * Very smooth skin that is free of exposed cells or flaws * Composed of uniformly sized microcells for even compression and sealing; you won't have to slam your doors * Jet black, not ash gray, in color for a refined, concours look * Molded using computerized temperature control for consistent cure cycles; prevents scorching and under cured parts * Made with over 50 tons of pressure for perfect definition and exact detailing * Hot-bonded at all joints * Dies are made using CAD and CNC mills for proper 3-D contouring, a perfect fit, and OEM-quality appearance * The softest OE-replacement weatherstrip products on the market
( 475 )
$13.99
On Sale
Summit Racing™ Direct-Fit Firewall Grommets
Summit Racing™ firewall grommets are designed to protect electrical wiring when passed through automotive firewalls. These versatile rubber plugs are engineered to OEM specs to help seal up holes and add a finished look to your engine bay. They're available in different sizes, including models for 4-, 6-, or 8-cavity connection applications.
Not Yet Reviewed
$11.99
ACDelco GM Genuine Parts Differential Cover Gaskets
Stop fluid leaks with ACDelco GM Genuine Parts differential cover gaskets. They're made from quality materials and built to fit both factory and aftermarket differential covers. The factory-recommended replacement gaskets are available for specific applications and install easily with no modifications.
( 4 )
$14.99
AP Exhaust Flange Gaskets
AP's assortment of products has grown to include mufflers, exhaust and tailpipes, catalytic converters, and other related installation and cosmetic accessories, including exhaust flange gaskets. AP exhaust flange gaskets are made with premium materials to withstand the higher temperatures of today's engines. Build the exhaust of your dreams with help from AP Exhaust!
( 17 )
$11.99
—
$14.99
ACDelco Crankshaft Front Seals
ACDelco designs their high-quality crankshaft front seals to fit various radial shafts and seal in engine oil while keeping dirt and water out. Featuring synthetic rubber or plastic composite materials, these engine seals conform to the rotating crankshaft sealing surface to help provide leak-free operation. The OE-style replacements provide the same fit and performance you expect from all General Motors parts. They're available in models for virtually any vehicle on the road today.
( 24 )
$13.99
Fel-Pro Exhaust Manifold Gaskets
Unwanted engine noise and fumes under the hood can often be traced to poor seals. Fel-Pro offers an extensive line of replacement gaskets to provide a leak-free connection between your intake and exhaust manifolds. Designed for OE-style fitment on hundreds of specific makes/models, the gaskets are crafted from top-quality materials, such as steel core laminate and compressed fiber laminate. Order the gasket configuration to match your exhaust manifold specs.
( 197 )
$10.99
—
$19.99
Rein Automotive OE Quality Engine Air Intake Hoses
Rein Automotive OE quality engine air intake hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacement for your vehicle's factory original parts, these hoses are identical to the Original Equipment Manufacturers in fit, form, and function. Order the Rein engine air intake hoses designed to fit your application.
( 1 )
$19.99
Ford Performance Parts Replacement Header Gaskets
When installing new headers or putting your headers back on, you'll need some good gaskets. Ford Performance Parts replacement header gaskets are made to stock specifications and tolerances, so you're sure to get a good seal.
( 4 )
$13.99
