Filters
When you're looking to replace leaking or worn-out engine seals, Fel-Pro head gasket sets have you covered. Ideal for your stock rebuilds or street-driven cars and trucks, Fel-Pro gaskets will have you back on the road in no time. They're available in hundreds of configurations for fitment on countless vehicles and engine types. Order the set designed for your car, truck, van, or SUV. (These gaskets are not intended for race applications.)
( 365 )
$122.99
—
$351.99
Mahle Original offers engine gasket sets for a variety of cars, trucks, and Jeeps. These full gasket sets include the many seals needed to rebuild your engine—all in one convenient package. The gaskets are made from a variety of materials, such as multi-layered steel or molded rubber, for use on various components. Order the Mahle Original engine gasket kit recommended for precise fitment on your vehicle application.
( 19 )
$154.99
—
$344.99
The chain of command between a crankshaft, camshaft, and engine valves is central to your vehicle's basic movement—which is why it's so important to protect the timing belt. Fel-Pro timing cover gaskets provide a tight seal to keep contaminants out of the gear shaft area. They're offered in hundreds of single or multi-piece sets for OE-style fitment on a wide variety of cars, trucks, vans, and SUVs; gaskets for industrial use are also available. Ideal for stock replacement (not intended for racing applications), Fel-Pro gaskets are made from materials such as fiber, cork, and rubber. Choose the kit which corresponds to your year/make and engine application.
( 531 )
$21.99
—
$60.99
Fel-Pro's PermaDryPlus valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to the gasket to resist being sucked in under high vacuum or blown out when under pressure. At the same time, it also prevents over-tightening of the mounting bolts. Note, however, that these gaskets are not intended for race applications.
( 246 )
$25.99
—
$35.99
Fel-Pro engine gasket kits include the seals needed for a complete rebuild, all in one convenient and affordable package. Each kit features the premium-quality gaskets required for your specific engine—from head, intake, and exhaust gaskets … to valve cover, fuel and water pump gaskets, and many more. These sets are available for thousands of vehicle applications. Match your year/make/model to the Fel-Pro engine gasket kit designed for precise fitment.
( 512 )
$139.99
—
$349.99
Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp load—resulting in less bore distortion. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing. MLS head gaskets are available for most aftermarket cylinder heads; as with all of Cometic's MLS head gaskets, no sealants or re-torque is required.
( 520 )
$87.95
—
$96.54
It's easy to diagnose worn-out oil pan gaskets--just follow the trail of black drips on your clean cement. Fel-Pro offers hundreds of OEM-style replacements to fit a wide range of auto, truck, marine, industrial, and agricultural applications. Many are one-piece units, while others are multi-piece with kit accessories. Depending on your vehicle, the oil pan gaskets could be constructed of molded rubber, cork and neoprene, PermaDryPlus, or rubber-coated fiber or steel core. Match up your specs to the Fel-Pro gasket needed to seal off oil leaks.
( 974 )
$10.99
—
$53.99
Fel-Pro PermaTorque MLS head gaskets provide the robust seal needed to contain peak combustion pressures and temperatures—and to withstand the significant casting motion encountered in many of today's automotive engines. The gaskets feature multiple layers of steel, precisely engineered sealing beads, and advanced polymer coatings to maintain a proper contact pressure between the cylinder head and block. Unlike other multi-layer steel head gaskets, PermaTorque MLS seals also include a proprietary blue aftermarket coating that accommodates a wider range of surface finishes. These gaskets are manufactured using precision tooling to ensure exact sealing bead location and profile. Order the model recommended for your specific vehicle and engine application.
( 85 )
$29.99
—
$53.99
Mahle Original rear main seals are high-quality rear main seals designed to replace your factory seals. They are constructed from high-quality materials to meet or exceed OE standards and are designed to provide long-lasting durability and performance. If you're looking for high-quality replacement seals for your vehicle, Mahle Original rear main seals are your solution.
( 23 )
$13.99
—
$82.99
Fel-Pro PermaDry valve cover gaskets are recommended for stock replacement use. Their shape, thickness, and construction varies with each engine application. In addition to tried-and-true materials such as cork and rubber, advances in gasket technology have also been incorporated into molded silicone seals for leak-free performance. Simply match up your vehicle's make and model year with the Fel-Pro PermaDry valve cover gaskets designed for precise fitment. Note that these gaskets are not intended for race applications.
( 376 )
$28.99
—
$68.99
Mopar Replacement supercharger gasket kits are the perfect choice to service and maintain your Mopar ride. These gasket kits offer OE fit and function and are cut from premium materials for leak-free performance. Choose genuine Mopar replacement parts for your vehicle.
Not Yet Reviewed
$274.99
Mahle Original valve stem seals control the lubrication of the valve stem as it slides into the valve guide. Too little oil contributes to stem and guide wear. Too much oil increases oil consumption and can cause a buildup of carbon, leading to valve seat damage and early valve failure, as well as reduced engine performance and emission failures. Mahle Original valve stem seals ensure dependable performance and superior service life.
( 11 )
$6.99
—
$17.99
Fel-Pro intake manifold gaskets are designed to be replacements for stock-type intake gaskets. This means they're ideal for stock rebuilds, as well as mild performance engines. The seals are available in a variety of configurations for fitment on hundreds of engine applications.
( 490 )
$11.99
—
$36.99
Fel-Pro conversion set gaskets are ideal for stock rebuilds or street-driven cars and trucks. They include every seal necessary for lower engine work. When combined with a Fel-Pro head set, conversion sets can be used for a complete overhaul. Order the gaskets designed for fitment with your engine type and designation.
( 79 )
$63.99
—
$186.99
Mahle Original offers a choice of cylinder head gaskets to fit your project with the most effective, leak-free seal. Because vehicles and performance levels are as different as the people who drive them, a head gasket that works for you may not work for another. Mahle Original knows this. Their list of head gasket materials includes multi-layered steel, Solicor, VR-2000, Nitroseal, and VR500. Each does their job differently, but you can rest assured that the sealing job they do will be effective and efficient. Positive sealing is available with Mahle Original cylinder head gaskets. Order the style designed for fitment with your vehicle and engine application.
( 42 )
$22.99
—
$134.99
Mopar Replacement head gaskets are precision-cut from premium materials to deliver a leak-free seal. A good seal is crucial to performance. When servicing your ride, choose genuine Mopar replacements to gain the OE fit and function you've come to expect.
Not Yet Reviewed
$57.99
—
$103.99
Fel-Pro air cleaner gaskets are designed to fit between your air cleaner and carburetor or TBI. They create a positive seal that will help prevent unfiltered air from entering your engine. Order the replacement gasket recommended for your vehicle and engine application.
( 61 )
$2.99
—
$4.99
Mopar Replacement timing cover gaskets are genuine parts you can count on to supply the OE fit and function you're expecting. Manufactured from quality materials, their selection of timing gaskets is the perfect choice to repair and maintain your Mopar ride with leak-free performance.
( 3 )
$24.79
—
$26.99
Mopar Replacement crankshaft seals offer high-quality, along with an original equipment fit and function to keep your favorite Chrysler, Dodge, or Jeep rolling down any road you choose to travel. These seals are made from quality OE-materials to deliver the best leak-free seal, and peace of mind. For a hassle-free installation and the performance that you expect, choose Mopar Replacement crankshaft seals. Order the part application you need.
( 1 )
$24.99
—
$27.99
Fel-Pro rear main seals are ideal for stock rebuilds or street driven cars and trucks. These OEM-style replacement seals are not intended for race applications. They're available in a variety of materials and configurations for fitment on specific vehicles and engine families.
( 161 )
$13.99
—
$62.99
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.
( 187 )
$24.95
—
$36.95
If you're rebuilding the top-end of your engine, you'll want one of these Mahle Original head gasket sets. They are perfect for stock rebuilds of engines for street-driven cars and trucks. Mahle Original head gasket sets are packaged in shrink-wrapped trays, giving you the ability to view the contents prior to opening the package. You receive every part you need to complete your gasket repair in one package (unless otherwise stated). Mahle Original utilizes OE equivalent or better materials in all their head sets, providing you with Mahle's Best Solution for your sealing needs. Mahle Original head gasket sets give you original equipment form, fit, and function, so they fit just like the originals. These gasket sets are not intended for race applications.
( 28 )
$119.99
—
$239.99
Fel-Pro water pump gaskets are offered in a variety of materials and configurations. These replacements are available for thousands of applications. Order the model or set recommended for fitment with your vehicle and engine family.
( 151 )
$3.99
—
$18.99
Mopar Replacement intake manifold gaskets and seals are the perfect choice to service and maintain your Mopar ride. Cut from premium materials for leak-free performance, they will provide an OE fit and function, just like the originals. Order genuine Mopar Replacement parts for your vehicle.
Not Yet Reviewed
$9.99
—
$178.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
