Fittings & Hoses
Availability
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes,...
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
Showing In Stock Items. Show All 105 Items.
QuickCar gauge sending units are ruggedly designed and built to withstand required operating pressures and temperatures, which makes them the perfect choice for high performance uses. For your racing supplies and equipment needs—you don't have to look any further than QuickCar Racing!
Not Yet Reviewed
$41.95
Davies Craig coolant temperature sensors are designed to be used with their inline adapters. Keep your readings accurate and your performance optimal with sensors from Davies Craig.
( 4 )
$30.22
ICT Billet oil level sensor and sending unit plugs are available for a variety of engines. They can be used when deleting or relocating your oil pressure sending unit--or to delete the oil level sensor in your factory oil pan. These quality delete plugs are made of aluminum and include a crush washer or O-ring, depending on the application.
( 11 )
$13.99
—
$17.99
United Pacific vacuum cap packs include an assortment of sizes to seal off vacuum lines/ports/connections to keep air and contaminants out. Each pack provides six of each size ranging from 1/8 or 1/2 in.
Not Yet Reviewed
$4.99
United Pacific 1928-31 Ford Model A copper spark plug connectors are identical to the original flat strips used to connect the plugs to the distributor caps. Copper is known to resist oxidation, have a spring-like attribute, and is a good conductor of electricity.
Not Yet Reviewed
$7.99
MagnaFuel pressure control unit fitting kits are designed to work with your MagnaFuel regulators. They are available in a variety of inlet and outlet sizes to accommodate your fuel system needs.
( 10 )
$40.79
—
$71.99
Manufacturer Rebate
AutoMeter offers these radiator hose adapter kits as another option for mounting your gauge's coolant temperature sender. They're available in a variety of fitting sizes.
( 73 )
$60.99
Available in a choice of line diameters, these Dakota Digital transmission temperature sender manifolds make plumbing your line easy. Senders must be purchased separately.
( 8 )
$47.50
Fleece Performance quick-connect fittings allow you to install AN style fuel lines to the factory quick-connect fuel lines. They are constructed out of aluminum and are black anodized for durability and corrosion-resistance. Fleece Performance quick-connect fittings feature a short hex height to maximize installation clearance.
Not Yet Reviewed
$17.99
Summit Racing™ LS oil galley barbell plug kits give you a cool, affordable way to improve your LS engine's oiling system. They include the rear "barbell" or "dogbone" which has a smaller stem diameter than the factory plastic unit to improve flow to the filter, a solid plug to delete the filter bypass in the oil pan, and a step washer and bolt to support the unsupported side of the oil pump pickup tube retainer.
( 6 )
$24.99
Designed to provide an easy connection to hose ends, these Summit Racing™ AN to inverted flare adapter fittings make it easy to plumb your fuel system. These fittings are replacements for those found on stock units.
( 79 )
$5.99
—
$7.99
Designed for vehicles equipped with an oil pressure gauge, Summit Racing™ oil pressure sender extensions are well-made components of the originals in fit and function. These oil pressure sender extensions thread into the engine block and move the oil pressure gauge sending unit out to where there is clearance. And since these extensions have a standard NPT thread size, they can also prove useful on non-original gauge installations as well.
( 13 )
$23.99
Having the right hose ends makes plumbing your vehicle much easier. Edelbrock hose barb to pipe fittings allow two different styles of connections within one unit. These fittings are constructed from aluminum and feature anodized finishes for longevity. Order the sizes and angles needed for your application.
( 56 )
$15.95
—
$41.95
Fragola Performance Systems PTFE brake hose assemblies are perfect replacements for worn-out rubber brake hoses. These strong, flexible units are constructed with PTFE tubing, reinforced with an outer braid of stainless steel. A clear or black plastic covering is available for most size hoses and adds another layer of protection. The hoses are resistant to heat and most chemicals, and are compatible with all brake fluids. All hoses are pre-assembled and pressure-tested to their rated working pressure. These assemblies are available in all popular configurations of -3 and -4 AN hose ends, including -3 lines. Fragola PTFE brake hose assemblies were an instant success because of their resistance to scratching anything they come into contact with. The black covering is popular with those who want to have the traditional look with the performance of PTFE-lined hoses. Choose the length, hose end angle, and other options needed for your vehicle.
( 51 )
$10.50
—
$66.99
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
—
$849.95
$673.95
—
$763.95
On Sale
Make fuel checks simple with Aeromotive's billet fuel sample valves. Depending on the model you select, the aluminum units can install into your 1/8 in. NPT inlet port with threads or quick-connect attachment. Some contain a stainless steel barb fitting for extension hoses and rotate 360 degrees for easy sampling. A spring-loaded safety feature keeps the sample valve sealed when unlocked, and rotates into a locked position when it's time for racing. When a fuel sample is required, simply rotate the valve to the unlocked position, press down for a fuel sample, re-lock, and go race!
( 7 )
$134.20
—
$223.30
$120.78
—
$200.97
Four Seasons offers hundreds of air conditioning fittings in a wide variety of styles, materials, sizes, and angles. When plumbing a vehicle's A/C or heating unit, specific adapters, valves, and connectors are always needed. Four Seasons has engineered and tested its OE-style replacement fittings to ensure years of quality performance--and each part is backed by more than a half-century of mobile air conditioning expertise.
( 19 )
$3.99
—
$26.99
MagnaFuel fuel logs are designed to configure multiple pressure control units so that there is less restriction. This results in even fuel distribution for proper fuel flow.
( 12 )
$56.99
Summit Bucks
Sonnax cooler line repair kits allow case salvage without transmission removal. A common complaint in late-model Chrysler rear-wheel-drive units is a cracked and/or leaking case caused by installing the cooler lines. The tapered threads and the lack of a stop on the OE cooler line fitting can load the case and create a fracture, resulting in leakage that may require replacing the case. Sonnax kits feature adapters that seal on the leading edge, preventing fluid from reaching the fitting threads and crack. The fittings have straight, not tapered threads, to prevent the crack from spreading. A special tap tool for case threads is also included in the cooler line repair kits.
( 7 )
$93.88
On Sale
Holley manifold plug and fitting kits allow two different styles of connections within one unit. They are offered to service your mid-mount accessory drive LT/LS, BBC, and SBC cooling manifolds. These genuine Holley fittings are constructed from aluminum and feature a chrome finish for longevity.
( 2 )
$43.69
$18.18
—
$39.32
Surplus units were widely used in fuel systems for decades. However, the surplus synthetic rubber seals are not always compatible with current hydrocarbon fuels and/or additives. Earl's has redesigned the original surplus valves with modern elastomers, which are not affected by most fuels and lubricants.
( 8 )
$127.95
—
$178.95
Advance Adapters inline radiator hose adapters allow you to retain your vehicle's stock temperature sending unit and gauge. Their upper radiator hose inline temperature sensor adapters are available in three combinations of two different hose diameters and sensor hole sizes to fit most block and radiator configurations. Keep your stock unit's hose, use Advance adapters.
( 8 )
$66.53
Cold Case now offers these water temperature sensor hose adapters for those wanting to connect two radiator hoses, while getting the most accurate water temperature. These water temperature sensor units are recommended when using a radiator that isn't specifically set up for an LS car. You can use the 1/4 in. NPT bung for your steam port. The adapter will allow you to use your regular radiator, connect it with upper hoses and run your steam port.
( 2 )
$21.54
Direct from Detroit, New Vintage USA LS temperature sender installation kits allow standard 1/8 in.-27 NPT threaded senders to be installed in the standard LS ports. The included M12 bushings are handmade from brass hex stock and enable you to use full-length temperature senders—there is no need for special "short" units. A pre-wired step-up resistor for tachometers reading a tach signal from the PCM is also included. Choose New Vintage USA LS install kits for accuracy, proper fitment, and American craftsmanship.
( 2 )
$65.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
