Fittings & Hoses
Availability
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes,...
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
Showing In Stock Items. Show All 806 Items.
Got a problem with your fuel line? Then Summit Racing™ adjustable fuel line rebuild kits are just what you need to fix that leaky fuel line. These rebuild kits come with O-rings and a fuel filter to get you back on track.
( 26 )
$8.99
Performance and reliability begin with All Balls Racing fuel tap diaphragm repair kits. Each kit may contain a diaphragm, spring, O-ring, screws, and other components as needed for your application. Select the kit designed for your on- or off-road powersports ride.
Not Yet Reviewed
$31.26
—
$35.44
Performance and reliability begin with All Balls Racing fuel tap repair kits. Available for several street bikes and off-road machines, each kit contains the components necessary to repair your petcock. Kits may include gaskets, O-rings, screws, washers, and more as needed for your application. Select the kit designed for your motorcycle, dirt bike, or ATV.
Not Yet Reviewed
$16.64
—
$39.61
Tanks Inc. offers fuel line kits for GM LS that include the hose and fittings needed to hook up one of Tanks Inc. fuel pumps to an LS engine swap setup. They're designed for LS engine swaps using a single fuel inlet fitting for the fuel source. Tanks Inc. GM LS fuel line kits include: * Fuel pressure regulator/fuel filter combination * 25 ft. of -6 AN twist-lock fuel line * Six straight -6 AN straight twist-lock fittings * Two 1/4 in. NPT to -6 AN straight fittings * Three 3/8 in. female quick-disconnect to -6 AN male fittings * 5/16 in. female quick-disconnect to -6 AN male fitting
( 26 )
$202.99
—
$204.99
Have a fuel delivery dilemma? Our Summit Racing™ fuel line combination kits can help. They're available in more than a dozen packages, containing fuel line, fittings, hose ends, and assorted accessories needed for easy repair or maintenance. Choose the options that best suit your application: fuel line length and diameter; start and finish plumbing locations; with or without clamps, and more.
( 85 )
$23.97
—
$171.93
Holley Terminator EFI fuel system plumbing kits provide everything needed for a complete supply fuel system for the Terminator EFI self-tuning engine management system. They are engineered using Holley electric fuel pumps, fuel pressure regulators, and fuel filters, coupled with quality Earl's hose, to provide a fuel system tailored to the needs of your Terminator EFI system. The systems are available with different fuel pumps and types of fuel hose, so you can choose what best fits your application. All Holley Terminator EFI fuel system plumbing kits feature quality Earl's anodized aluminum fittings to get the job done and look good, too.
( 10 )
$749.95
—
$1,449.95
Holley EFI fuel system plumbing kits are the perfect complement to your Sniper EFI or Holley EFI kit. These plumbing assemblies are engineered using Holley fuel pumps, regulators, and filters—coupled with Earl's Performance plumbing, to provide a fuel system tailored to your vehicle's specific needs. Components vary, depending on the kit you select.
( 34 )
$255.95
—
$549.95
Edelbrock Performer fuel line and fitting kits include the braided flex hose and pre-assembled ends to connect your fuel filter to the mechanical fuel pump—or, in racing applications, to the fuel pressure regulator. These kits are available in a variety of styles, providing leak-free installation in minutes. When plumbing a fuel system, trust the aftermarket performance expertise of Edelbrock!
( 114 )
$50.95
—
$69.95
FiTech stainless steel fuel line kits are perfect for plumbing your vehicle for pump gas, methanol, ethanol, or alcohol. These braided, chemical-resistant flex lines are available in a natural or black finish, and they include aluminum fittings, 40 micron filter, and check valve. Order the fuel line diameter and length needed for your application.
( 2 )
$373.00
—
$499.00
Tanks Inc. universal fuel line kits include 25 ft. of line and all or most of the fittings that you need to plumb your fuel system when using a Tanks Inc. fuel pump. The kits will give you all the fittings needed to plumb a FI-Tech system and most fittings to plumb systems that use an external fuel regulator, such as MSD Atomic, Holley Terminator, or FAST EZ-EFI. Tanks Inc. universal fuel line kits include: * Fuel filter * Two quick-disconnect fittings for fuel filter * Two 1/4 in. NPT to -6 AN fuel pump adapter fittings * Six -6 AN straight Twist-Lok fittings * 25 ft. -6 AN black Twist-Lok fuel hose
( 19 )
$174.99
—
$364.99
Radiator hoses can be the Achilles heel of your ride if they aren't serviced and replaced when signs of weakness or wear start to appear. Summit Racing™ radiator hose kits keep the engine-cooling arteries between your powerplant and the radiator secure and functional. They will help keep your vehicle running at optimal temps for many miles to come. Their colored design and application-engineered fit will give your vehicle a custom-plumbed look. Kits are available for various makes and models, so find the best fit for your application and restore your cooling system to peak performance.
( 8 )
$87.99
—
$192.99
Fleece Performance coolant bypass kits meet the demands for more cooling that comes with increased horsepower. Your engine cooling system was designed to handle a 300-350hp engine. When you increase the power, you increase the demand on your cooling system and the possibility of problems that may lead to failure. Fleece coolant bypass kits feature a secondary thermostat that operates on temperature--not excessive pressure--solving excessive pressure problems before they become an issue by ensuring consistent temperatures across all six cylinders. Each kit includes high-quality AN O-ring fittings and AN hose connections with braided hose to ensure a leak-free installation. When there's a need for better performance, you can rely on coolant bypass kits from Fleece to supply the necessary components for assured greater performance.
( 6 )
$379.99
—
$399.99
Installing an aftermarket fuel pump? Make the job a lot easier with our Summit Racing™ aftermarket pump to carburetor fuel line kits. They include all of the fuel pump fittings, braided hose, braided hose ends, and carb fittings you need to get the job done.
( 99 )
$43.99
—
$68.99
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$767.95
—
$870.95
Allstar Performance fill plug kits enable you to put a fill plug where you need it. They include an aluminum or steel bung for use as an inspection plug or filler plug, plus an easy-grip cap with an O-ring for a positive seal. The kits are available with a small 1 3/8 in. opening or a large 3 in. diameter opening. These weld-on or bolt-on fill cap kits are available in a variety of styles and finishes.
( 18 )
$28.99
—
$104.99
NotcHead hard line clamp builder kits offer everything you need for your project in one box. These assortments contain a selection of all four sizes of clamps, along with nuts, fasteners, and self-drilling screws. Centered set screws mean that you drill and tap holes right where you want your lines to go. Lines easily "snap in" with a push of your finger and eliminate the need for Z-bends to adjust for fittings; once your lines are installed, the set screw is completely hidden from view. The clamps are made from high-strength copolymer acetal plastic with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, and are easy on painted parts. Your plumbing job will be quick, safe, and professional with NotcHead hard line clamp builder kits.
Not Yet Reviewed
$198.40
—
$821.58
Make changeovers a breeze with Jiffy-tite transmission kits. Available for virtually all transmissions, they offer you freedom from being showered with tranny fluid--simply unhook the self-sealing, quick-disconnect fittings and the job is done--no leaks, no mess. And you don't need tools to connect or disconnect them, saving you time! These kits are valved, with fluorocarbon seals and valve connections at both the socket and plug assemblies, providing slip-proof connections with minimal flow restriction. Depending on your application choice, the kits may include steel braided lines, reducers, plugs, sockets, and elbows. Be leak-free in seconds with Jiffy-tite transmission kits.
( 3 )
$137.65
The dual fuel tank line kits for GM LS from Tanks Inc. includes 25 ft. of line and all the fittings that you need for your LS engine swap using our fuel pumps and two tanks. The kits are designed for LS engines that have a single fuel inlet fitting. The regulators in this Tanks Inc. dual fuel tank line kit are not recommended with fuel pumps that flow over 255 lph. Kit includes: * (2) Fuel filter/fuel regulators * (2) In-Line check valves * (2) 6AN coupler fittings * (1) 6AN Male Y-fitting * (4) 1/4 in. NPT to -6AN adapter fitting (fuel pump pickup and return line fittings) * (14) Russel straight -6AN straight Twist-Lok fittings * (2) Russell 3/8 in. Male Quick Disconnect to -6AN Male fittings—fuel feed from regulator to engine fitting * (3) Russell 3/8 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator feed from pump and fuel rail fitting * (2) Russel 5/16 in. Female Quick Disconnect to -6AN Male fittings—fuel regulator return line fitting * 25 ft. of -6AN black push lock fuel hose
Not Yet Reviewed
$438.99
These Summit Racing™ cap and plug kits are designed to keep your AN lines free from dirt and debris. They are made of molded plastic and come with all of the common sizes you will need. Kits contain: * Four -10 AN caps * Four -12 AN caps * Four -16 AN caps * Four -6 AN caps * Four -8 AN caps * Four -10 AN plugs * Four -12 AN plugs * Four -16 AN plugs * Four -6 AN plugs * Four -8 AN plugs
( 10 )
$19.99
Designed for use with Edelbrock's single and dual feed fuel line kits, these high-quality stainless steel braided lines make it simple to complete your installation of any Edelbrock fuel pump to fuel filter. Russell anodized aluminum fittings are included.
( 43 )
$58.95
—
$97.95
Designed to take the guesswork out of carb swaps, these fuel line and filter kits provide a quick, leak-free installation in a matter of minutes. They'll work with all Performer and some other brands of carbs and are available in different forms for a variety of applications.
( 36 )
$50.95
—
$133.95
Upgrade your cooling system with Cold Case silicone hose kits that add style and performance to your ride. All Cold Case radiator hose kits come with super smooth and heat-resistant 5mm thick hose walls. While most competitors' versions are made from inferior 3-ply material, Cold Case uses only 4-ply material for superior performance. Additional features of Cold Case silicone hose kits include: * Designed specifically for particular makes and models * Made of high-quality silicone for enhanced strength and durability * Direct-fit replacements for stock rubber hoses * Available in a choice of colors
( 6 )
$76.54
—
$185.54
NotcHead soft line clamp builder kits offer everything you need for your project in one box. These assortments contain a selection of all three sizes of clamps, along with nuts, fasteners, and self-drilling screws. Centered set screws mean that you drill and tap holes right where you want your lines to go. Lines easily "snap in" with a push of your finger and eliminate the need for zip ties to run lines in parallel; once your lines are installed, the set screw is completely hidden from view. The clamps are made from high-strength copolymer acetal plastic with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, and are easy on painted parts. Your plumbing job will be quick, safe, and professional with NotcHead soft line clamp builder kits.
Not Yet Reviewed
$198.40
Your vehicle's cooling system does a great job at preventing your engine from overheating, and Summit Racing™ radiator hose clamp kits are just one of many components that can help to keep it that way! These worm gear clamps feature a smooth inner band that helps to prevent hose extrusion, and the clamps' stainless construction not only looks good, but lasts a long time.
( 14 )
$11.99
—
$16.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
