Fittings & Hoses
Availability
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes,...
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
FAST makes it easy to keep your LSXR intake manifold in perfect working condition. FAST provides all of the necessary replacement parts you may need for regular service work or to repair unforeseen damage—including these LSXR intake manifold purge fittings. Order the components needed to maintain your application.
Not Yet Reviewed
$19.95
Here's the problem: On the L5P Duramax, because of the direct placement of the MAP sensor into the intake air stream from the factory, soot buildup becomes an ongoing maintenance problem. This requires the sensor to be routinely cleaned or replaced. The solution is Fleece Performance MAP sensor spacer kits. Fleece's spacer moves the sensor from the direct intake air stream to reduce soot buildup over time and eliminates the need to routinely clean or replace the sensor. The spacer block also integrates a 1/8 in. NPT port to allow for installation of an auxiliary boost pressure sensor. Fleece Performance kits include mounting block, fastener, seal ring, and O-ring port plug.
Not Yet Reviewed
$68.99
Summit Bucks
ACDelco Gold turbocharger hoses are specially compounded for use as short, flexible connectors between the turbocharger and components. The hoses are temperature rated from -60 degrees F to 500 degrees F (-51 to 260 degrees C) and are approved for marine applications. These premium aftermarket replacement turbocharger hoses are manufactured to meet your expectations for fit, form, and function.
( 1 )
$9.99
—
$13.99
Summit Bucks
ACDelco GM Genuine Parts air intake hose clamps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These clamps are used to help attach and seal the end of a hose to prevent leaks. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles.
Not Yet Reviewed
$9.99
The Right Stuff intake manifold fittings offer the right fit and the right performance! These natural finished steel fittings screw into your factory intake manifold to distribute vacuum to your various systems. Available in 90 degree and tee-style designs, The Right Stuff intake manifold fittings are a great choice for your restoration work.
( 10 )
$31.99
These Spectre air intake tube collars are ideal for use with 3 in. diameter air intakes. They are designed to attach the tube clamp to the air intake inlet flange housing. Spectre air intake tube collars are manufactured from steel and are then triple chrome plated to a mirror finish.
( 9 )
$8.99
If you need to design and build a custom one-off air intake system, Spectre has you covered. Spectre Performance intake tube clamps allow you to connect multiple modular tubes together for a custom-designed system. Several styles and sizes are available to suit your needs. It's easy to build your own air intake with Spectre air intake components.
( 6 )
$7.99
—
$9.99
S.U.R. &R. intake cleaning adapters are specialty fittings that allow you to deep clean your air intake system. You'll improve fuel performance by removing carbon build-up. When used in tandem with your fuel injection cleaning canister, the adapter's nozzle end will produce a 360-degree fine mist spraying action—distributing the cleaning solvent evenly into the intake.
Not Yet Reviewed
$61.99
When running a larger intake system, such as an APR system, routing the factory coolant hose under the system may not be possible on some vehicles, or may fit snugly on others. APR intake system coolant hoses are redesigned as a plug-and-play upgrade that neatly runs under the intake for a clean install with minimal stress on the part. APR offers two versions. Version 1 replaces the factory hose held on by a crimp clamp which must be cut. Version 2 replaces the factory hose which is held on by a spring clamp. Choose the proper version for your vehicle.
Not Yet Reviewed
$44.95
Longacre has temperature manifold fittings for your gauges. These manifold fittings are made from brass and are available in popular sizes to fit your needs.
Not Yet Reviewed
$11.99
—
$12.99
The Stop Shop's intake vacuum fittings provide a vacuum source to operate needed accessories on a vehicle, specifically classic Pontiac models from 1968-1974. These fittings thread into the intake manifold and serve as connection points for vacuum hoses. They facilitate the distribution of engine vacuum to various components that rely on it for their function, such as the brake booster, PVC valve, and other vacuum-operated components. Essentially, these fittings ensure that vacuum pressure generated by the engine is effectively channeled to the parts that require it for proper operation, contributing to overall vehicle performance and functionality.
Not Yet Reviewed
$27.99
Performance Design XS intake manifold fuel inlet fittings are available in styles to replace the original or upgrade for added clearance. The straight fitting would be the replacement and the 90-degree swivel fitting offers improved clearance to aftermarket valve covers, coil covers, or other accessories. The 90-degree styles have a factory quick-disconnect fitting to attach your fuel line. Select the fuel inlet fitting needed.
Not Yet Reviewed
$29.99
On Sale
BD Diesel intake hose clamp kits consist of individual clamps of different sizes for special applications. These rugged, spring-loaded, stainless steel T-bar clamps can provide up to 400 lbs. of clamping pressure to create the ultimate hold. These kits are a must for modified turbo diesels. So, don't wait for a hose to blow--upgrade today!
Not Yet Reviewed
$85.95
$77.36
The Right Stuff vacuum fittings are designed to get your vacuum system connected and operating properly. They are manufactured from quality materials and install in the factory location for a direct fit.
( 1 )
$31.99
Clearance
Do you have a cracked, broken, or leaking heater hose? Don't worry--just pick up one of these Dorman heater hoses to solve the problem. They are manufactured to OEM specifications, so installation is quick and easy. Dorman heater hoses feature quality materials and are available for today's most popular vehicles.
( 25 )
$79.99
$27.99
—
$78.99
Radium Engineering press-in valve cover fittings require no drilling or welding. These low-profile swivel fittings simply press-in. Radium offers valve cover fittings for PCV valve replacement and crankcase vent ports. These good-looking fittings feature stainless/aluminum construction, an anodized finish, and laser engraving with the Radium name.
Not Yet Reviewed
$56.95
ICT Billet vacuum port fittings are built from high-quality billet aluminum. To make your vacuum line project simple, ICT Billet has made these available in multiple configurations to fit your needs.
( 2 )
$19.99
On Sale
Summit Racing™ billet fuel vapor purge solenoid plugs provide a simple and easy way to replace the factory solenoid in a legally acceptable engine swap application. The plugs block off the EVAP port and install in seconds. We include the plug, bolt, and O-ring.
( 2 )
$23.99
$17.99
Clearance
Continental heater hoses are designed for vehicles that need custom-routed heater hoses. They meet or exceed SAE J20R3, D1 specifications, so they'll stand up to the heat. Continental heater hoses use rugged construction; most are manufactured from Versigard rubber—a compound highly resistant to heat, oil, and weather. Their patented knit reinforcement is typically made with Tylanar fabric, a material that also meets the safety requirements. Some models incorporate other high-grade materials, as well. Continental heater hoses are available in a variety of diameters and lengths compatible with numerous of makes/models.
( 10 )
$3.99
—
$95.99
Sierra Marine offers molded hose in a variety of sizes and configurations for many different watercraft connections. Whether you captain a Mercruiser, Mallory, or Mercury boat, these OEM replacements are manufactured from quality materials and factory specs to provide the right fit and performance. Refer to the Notes and Applications tab above to find the correct part needed for your application.
Not Yet Reviewed
$32.99
Rein Automotive PCV hoses and tubes are OE-quality breather hoses that fit European vehicles the way the original manufacturer intended. They are designed as direct replacements, and are identical to the specs and form of the original.
Not Yet Reviewed
$82.99
URO Parts radiator hoses and coolant pipes are part of their extensive line of cooling system components. All of their rubber coolant hoses are double-reinforced for extra strength and durability. Each hose and pipe is manufactured from electro-chemical degradation-resistant materials that prevent electrolysis from breaking down the material from the inside out. Select URO Parts radiator hoses and coolant pipes are URO Premium products. They are re-engineered to solve the problems of failure-prone OEM parts. URO Premium products feature a more robust design or higher-grade materials, or both, to vastly improve the reliability and durability of the product. Each URO Premium product bears the URO Premium seal and PRM suffix to their part number to easily distinguish them from their OE counterparts.
( 1 )
$7.99
Keep the hot coolant circulating with molded heater hoses from Dayco. These hoses are constructed from synthetic EPDM for high-strength and resistance to oil, salt, mud, debris, coolants, and environmental elements. The inner base tube of Dayco molded heater hose is reinforced with knitted rayon for maximum strength and burst-resistance. They eliminate the need for multiple connections of hoses and clamps. Dayco hoses are specifically designed for your application to ensure proper fit and function.
( 105 )
$3.99
—
$35.99
Summit Bucks
ACDelco offers heater hoses for virtually any vehicle from the 1940s and up. These replacements are available in a wide array of sizes and configurations—for hundreds of hose connection positions. They're designed to original factory specs to ensure fit and performance. Order the hoses recommended for your applications.
( 32 )
$1.99
—
$168.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
