Fittings & Hoses
Availability
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes,...
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
Get your fuel and just about any other fluids where they need to go! We have fittings, valves, hose ends, and plugs in a wide assortment of sizes, materials, and finishes, plus hoses to match in materials ranging from rubber to braided stainless steel. We’ve got complete fuel line kits, transmission fluid lines, radiator hoses, clamps, brackets, and A/C and heat plumbing—grab everything you need at once! While you’re at it, pick up some specialized AN fitting tools as well.
Summit Bucks
NotcHead hard line clamp builder kits offer everything you need for your project in one box. These assortments contain a selection of all four sizes of clamps, along with nuts, fasteners, and self-drilling screws. Centered set screws mean that you drill and tap holes right where you want your lines to go. Lines easily "snap in" with a push of your finger and eliminate the need for Z-bends to adjust for fittings; once your lines are installed, the set screw is completely hidden from view. The clamps are made from high-strength copolymer acetal plastic with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, and are easy on painted parts. Your plumbing job will be quick, safe, and professional with NotcHead hard line clamp builder kits.
Not Yet Reviewed
$198.40
—
$821.58
Summit Bucks
NotcHead braided line clamp builder kits are a great and simple way to have everything you need to for your project in one box. This kit includes lots of clips, nuts, fasteners, and self-drilling screws that go with them.
( 1 )
$198.40
—
$821.58
Summit Bucks
NotcHead soft line clamp builder kits offer everything you need for your project in one box. These assortments contain a selection of all three sizes of clamps, along with nuts, fasteners, and self-drilling screws. Centered set screws mean that you drill and tap holes right where you want your lines to go. Lines easily "snap in" with a push of your finger and eliminate the need for zip ties to run lines in parallel; once your lines are installed, the set screw is completely hidden from view. The clamps are made from high-strength copolymer acetal plastic with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, and are easy on painted parts. Your plumbing job will be quick, safe, and professional with NotcHead soft line clamp builder kits.
Not Yet Reviewed
$198.40
Summit Bucks
NotcHead wire and cable builder clamps are the easiest way to secure your wiring and battery cables. This ultimate solution keeps lines off your painted surfaces and enables the running of parallel cables. The clamps are made from heat-resistant copolymer acetal, and NotcHead offers a half-dozen clamps with machine screws, nuts, and self-drilling screws. They also have packs without fasteners to refill your Builder kit. After the cable is installed, the screws are completely hidden, creating a clean, professional look. It's a "snap" to take your project to the next level with NotcHead. Order the outside diameter best suited for your cable application.
Not Yet Reviewed
$198.40
Redhorse Performance 1000 Series swivel seal hose ends are meticulously engineered. RHP starts with detailed CAD drawings and then cuts each component from 6061 T6 aluminum on their CNC machine turning centers—providing superior thread strength and smooth assembly. Available in different AN fitting sizes and finishes, select the 1000 Series swivel seal hose ends designed for your application needs. Additional product features: * Available in straight, 30 degree, 45 degree, 60 degree, 90 degree, 120 degree, 150 degree, and 180 degree angle * Engineered for use with RHP's 200, 205, 230, and 235 series hoses (sold separately) * For high performance race applications, Redhorse recommends using the 205 and 235 series e85 compatible hoses (sold separately) * Custom designed hose nipples enable a quick, easy, and consistent hose end assembly and our double swivel seal design makes for easy re-clocking * Double Viton® O-ring seals provide leak-free performance when used with a wide range of racing fuels and fluids * Color consistent anodizing and unique pressure testing adds the final touch of quality and protection that professional engine builders have come to expect from Redhorse Performance AN hose ends * Can be easily assembled with the help of RHP's custom made tools (sold separately)
( 10 )
$8.07
—
$71.74
Redhorse Performance 1200 Series reusable PTFE hose ends are meticulously engineered. RHP starts with detailed CAD drawings and then cuts each component from 6061 T6 aluminum on their CNC machine turning centers to provide superior thread strength and smooth assembly. Order the AN fitting size that meets your application needs. Additional product features: * Available in straight reusable PTFE; and PTFE 30 degree, 45 degree, 60 degree, 90 degree, 120 degree, 150 degree, 180 degree angle * 1200 Series reusable swivel seal PTFE fittings are engineered for the exclusive with RHP PTFE hoses (sold separately). * In order to re-use the hose end you will need to purchase a package of our replacement ferrules (sold separately) * Double Viton® O-ring seals provide leak-free performance when used with a wide range of racing fuels and fluids * RHP's famous hand polishing and color consistent anodizing add the final touch of quality that professional engine builders have come to expect from Redhorse * Hose ends can be easily assembled with the help of RHP's custom made tools (sold separately) * Not to be used with standard braided racing hoses or push lock hoses
( 11 )
$13.46
—
$32.99
Summit Bucks
NotcHead hard line clamps are an easier way to secure lines. Crafted from high-strength, copolymer acetal plastic, these uniquely designed clamps feature center set screws—and once installed, your lines simply "snap in" with the push of your finger. The hard line clamps are heat-resistant with a melting point of 330 degrees F. They also have low-moisture sensitivity, great wear resistance, are easy on painted parts, and are available for a variety of line diameters. Packs of 6 are offered with fasteners, or choose a bulk pack of 12 without fasteners to refill your Builder kit. If you're running brake lines, fuel lines, or plumbing other hard lines, NotcHead clamps are quick, safe, and will result in a clean, professional appearance. Order the set that best fits your hose diameter.
( 25 )
$17.81
—
$47.03
Summit Bucks
NotcHead braided line clamps are the easiest way to secure braided lines. This ultimate solution keeps lines off your painted surfaces and enables the running of parallel lines. The clamps are made from heat-resistant copolymer acetal, and NotcHead offers a half-dozen clamps with machine screws, nuts, and self-drilling screws. They also have packs of 12 without fasteners to refill your Builder kit. After the line is installed, the screws are completely hidden, creating a clean, professional look. It's a "snap" to take your project to the next level with NotcHead braided line clamps. Order the outside diameter best suited for your line application.
( 8 )
$17.81
—
$47.03
Redhorse Performance offers 930 Series Y-blocks—cut from 6061 T-6 aluminum on their CNC machines, resulting in superior thread strength and smooth assembly. These Y-blocks are an effective way of splitting one fuel line into two and are available in anodized finishes to add the final touch of quality that professional engine builders have come to expect from RHP.
( 2 )
$29.99
—
$49.99
Summit Bucks
NotcHead soft line clamps are quick, safe, and professional. They allow for a simple snap-in, snap-out installation of your heater hose, A/C lines, and more—keeping the lines off your painted surfaces and enabling you to run parallel lines. The soft line clamps are crafted from heat-resistant copolymer acetal and feature a center set screw design; once your lines are installed, the set screw is completely hidden from view, creating an expertly clean appearance. They're available in several hose diameters, as well as in a choice of quantities—6 with fasteners or 12 without to refill your Builder kit.
( 4 )
$24.76
—
$28.73
Redhorse Performance 6000 Series non-swivel seal hose ends feature the same unique hand polishing as all of their hose ends and are cut from 6061 T6 aluminum on their CNC machine turning centers providing superior thread strength and smooth assembly. RHP's 6000 series non-swivel hose ends are slightly lighter and smaller than other swivel seal counterparts. Assemblies built with the 6000 Series hose ends cannot be re-clocked. Order the AN hose end fittings designed for your application. Additional product features: * Hose ends are available in non-swivel 30 degree, 45 degree, 60 degree, 90 degree, 120 degree, 150 degree, and 180 degree angle * Engineered for use with RHP's 200, 205, 230, and 235 series hoses (sold separately) * For high performance race applications, Redhorse recommends using the 205 and 235 series e85 compatible hoses (also sold separately) * Custom designed hose nipples enable a quick, easy, and consistent hose end assembly * Double Viton® O-ring seals provide leak-free performance when used with a wide range of racing fuels and fluids * Color consistent anodizing and unique pressure testing adds the final touch of quality and protection that professional engine builders have come to expect from Redhorse Performance AN hose ends * RHP hose ends can be easily assembled with the help of our custom made tools (sold separately)
( 2 )
$16.79
—
$54.97
Redhorse Performance 7000 Series crimp style hose end fittings offer the very best in performance and ease of assembly. Cut from 6061 T6 aluminum on RHP's CNC machine turning centers, these crimp style hose ends assemble in a matter of seconds with the aid of your crimping machine. Utilizing RHP's exclusive hand polishing, color consistent anodizing and unique pressure testing, these fittings add the final touch of quality and protection that professional engine builders have come to expect from Redhorse AN hose ends. Order the fittings designed for your application. Additional product features: * Available in straight, 30 degree, 45 degree, 60 degree, 90 degree, 120 degree, 150 degree, and 180 degree angle * Engineered for use with RHP's 200, 205, 230, and 235 series hoses (sold separately) * For high performance race applications, Redhorse recommends using the 205 and 235 series e85 compatible hoses (also sold separately) * Double Viton® O-ring seals provide leak-free performance when used with a wide range of racing fuels and fluids * RHP crimp-style hose ends must be assembled with the aid of a crimping machine (sold separately)
Not Yet Reviewed
$14.79
—
$60.03
Redhorse Performance 1300 Series ORB swivel seal hose ends are made with the same care as RHP's standard hose ends. Redhorse starts with detailed CAD drawings and then cuts each component from 6061 T6 aluminum on their CNC machine turning centers to provide superior thread strength and smooth assembly. These AN fittings help save space and money by eliminating the need for an ORB adapter—and are perfect for threading into fuel rails, pumps, regulators, in-line filters or anything else that has ORD ports. Order the fittings designed for your application. Additional product features: * Available in 45 degree ORB and 90 degree ORB applications * Engineered for use with RHP's 200, 205, 230, and 235 series hoses (sold separately) * For high performance race applications, Redhorse recommends using the 205 and 235 series e85 compatible hoses (sold separately) * Custom designed hose nipples enable a quick, easy, and consistent hose end assembly and our double swivel seal design makes for easy re-clocking * Double Viton® O-ring seals provide leak-free performance when used with a wide range of racing fuels and fluids * Color consistent anodizing and unique pressure testing adds the final touch of quality and protection that professional engine builders have come to expect from Redhorse Performance AN hose ends * Can be easily assembled with the help of RHP's custom made tools (sold separately)
Not Yet Reviewed
$28.31
—
$47.22
Finish your turbo project with Russell oil pan drain flanges. Designed with builders in mind, these flanges offer easy solutions to your oil return problems by bolting to any oil pan or cover. Made from aluminum and available in several fitting sizes to fit your needs.
Not Yet Reviewed
$31.95
Make the perfect set of brake lines with The Right Stuff tubing. Sold by the foot, it is perfect for street rodders and custom builders wanting the right fit at the right price. Tubing is available in the original material and stainless steel. Make your rod right with The Right Stuff tubing
( 1 )
$5.99
Engineered for the professional bike builder, Russell Pro System I compression hose end fittings are chrome plated and designed to ensure a positive seal. These quality hose end fittings are to be used in conjunction with Pro System I braided hose for connections between the master cylinder, junction block, and caliper.
Not Yet Reviewed
$11.99
Vintage Air offers caps to keep dirt and debris out of your air conditioning system during building and mock-up. These plastic caps are a must for any custom car builder.
Not Yet Reviewed
$1.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
