Filters
These Allstar Performance brake shut-off valves allow you to easily control brake fluid flow. They feature a 1/8 in. NPT inlet and outlet and are rated at 2,000 psi for racing applications. The valves have an easy to use plastic handle at the top for quick shut-off.
( 11 )
$69.99
Earl's Performance UltraPro ball valves are ideal for all racing applications and provide full uninterrupted flow when opened. The lightweight modular design is easy to rebuild; and the glass-reinforced PTFE seals are compatible with gasoline, racing fuels, methanol, alcohol, E85, oil, water, and coolant. The small body valves are available in -6 and -8 AN sizes; and the large body valves are available in -10 and -12 AN sizes (choose from male/male, or male/female styles). UltraPro ball valves feature an attractive clear and black anodized finish with red handle, a 1/4 in. hole for cable operation—and are curved outward from the body for easy operation (with extra finger clearance, even for drivers wearing racing gloves). These racing ball valves are ideal for use in most fuel and oil systems (i.e. fuel shut-off valves, oil accumulators/accusump systems, and many other applications).
( 22 )
$144.95
—
$182.95
These Tilton flow control valves work by restricting the return flow of the hydraulic fluid by a tunable amount, reducing shock loads to the driveline by allowing the clutch to slip slightly during engagement. They do not restrict flow during release. The shock load is a result of an abrupt clutch engagement when the crankshaft and input shaft speeds are not precisely matched. The Tilton Flow control valves are designed to reduce the risk of traction loss when downshifting and reduce the chance of damaging driveline components.
( 1 )
$165.75
Earl's Performance brake booster check valves replace your OEM plastic valve for a clean, custom appearance. Choose from black or clear anodized finish and three vacuum hose options. The valves fit most brake boosters or vacuum canisters with a 13/16 in. O.D. on booster. Replace that plain, old plastic valve with a more attractive Earl's brake booster billet aluminum check valve. Features: * Machined from billet 6061-T6 aluminum * Anodized black or clear for superior corrosion protection * 90 degree angle * 1/2 in. vacuum hose barb fits most GM LS engines * 3/8 in. vacuum hose barb fits most other domestic and import engines * -06 AN male vacuum hose for use with -AN hose * Valve material: premium FKM (lasts much longer than OEM plastic and rubber valve) * Fits most brake boosters with 0.588 in. port (I.D. of the grommet)
( 5 )
$71.69
—
$76.45
Eddie Marine manual control valves enable fuel flow from the right, left, or both tanks—or can shut off the fuel. These valves are manufactured from 6061-T6 aluminum and are available in a polished finish. They also feature 1/2 in. NPT inlets and outlets for high fuel flow. Note: To help deter internal corrosion of valve components, it's recommended that the valve be periodically lubricated. Valves which fail due to internal corrosion are not covered by warranty.
( 1 )
$186.00
These Earl's Performance shut-off valves are ideal for use as emergency fuel shutoffs, drain valves, or even as anti-theft devices. They have a lever design, which makes them quick and easy to use.
( 36 )
$32.55
—
$182.95
Russell shut-off valves allow you to easily control the flow of fluid with just a simple quick flip of a switch! These shut-off valves have large handles that make them easy to use, and they're also clearly marked for proper flow direction. They feature an aluminum construction with an anodized black finish, and are available in a variety of AN sizes to best suit your application requirements.
( 23 )
$25.95
—
$32.95
Russell check valves are designed to allow flow in one direction and prevent flow back. They feature a 304 stainless steel check piston that delivers optimum flow with minimal restriction and pressure loss. A positive O-ring seal is incorporated into the high-flow check piston. These valves are ideal for fuel systems due to their low opening pressure of 3 psi. Russell check valves are offered in a choice of sizes to meet your needs.
( 10 )
$33.95
—
$52.95
Improved Racing high-flow flapper check valves are ideal for use in oiling systems (wet sump and dry sump), fuel systems, crankcase pressure ventilation systems, and more. Most check valve designs—including poppet check valves, ball check valves, diaphragm check valves, piston check valves, and others—are restrictive, resulting in a pressure drop across the valve even when fully open. Improved Racing's check valves use a flapper design, originally developed for military jet engine turbines, that swings completely out of the fluid's flow path, adding virtually no flow restriction. These check valves were further optimized for low restriction at high flow rates using flow simulation software—and were designed to exceed most military specification requirements. The valves have been tested at up to 1,000 psi of backflow holding pressure without catastrophic failures or excessive leakage. This allows Improved Racing to very safely rate these valves to hold 300 psi of backflow pressure under normal operating conditions with a very high factor of safety. For comparison, the military surplus flapper check valves tested failed catastrophically with complete pressure loss at less than 200 psi. This flapper-style valve has a very low cracking pressure of less than 0.05 psi. Every internal component (hinge, spring, hinge pin, and gasket core) is made from stainless steel to ensure long-lasting, reliable performance and compatibility with just about any fluid, including corrosive fluids. The check valve's gasket is made from FKM (Viton®) rubber bonded to a stainless steel core, giving it a high operating temperature of up to 302 degrees F. It's also highly chemical-resistant and compatible with all types of fuel. Improved Racing's check valves are available in multiple fitting sizes, and the inlet and outlet halves can be mixed and matched to create a completely custom valve. Features and specifications: * Flapper design allows for very high flow with low restriction * Design optimized using flow simulation software * FKM (Viton®) rubber seal * All stainless steel internal components for compatibility with a wide range of fluids * 6061-T6 billet aluminum body with black MIL-A-8625 Type II anodized finish * Laser marked with flow direction and hinge location per military specification * Maximum operating backflow holding pressure of 300 psi, burst backflow holding pressure of over 1,000 psi * Maximum unchecked (normal direction of flow) operating pressure of over 1,000 psi * -40 to 302 degrees F operating temperature rang * Lifetime Warranty
Not Yet Reviewed
$149.00
—
$159.00
Summit Racing™ one-way check valves are designed to prevent the back flow of any fuel, coolant, or oils. Their flapper design provides minimal flow restriction, and the high-quality construction of these valves ensures long-lasting performance. Their PTFE flapper requires a low 2 psi to lift off of the seat and is resistant to alcohol, methanol, and bio-diesel fuels. These check valves are offered in a choice of sizes to suit your needs.
( 31 )
$45.99
—
$63.99
Tanks Inc. fuel line check valves are designed to allow flow in one direction and prevent backflow. They feature a 304 stainless steel check piston that delivers optimum flow with minimal restriction and pressure loss. These valves are ideal for fuel systems due to their low opening pressure of 3 psi. Tank Inc. check valves are offered in a choice of sizes to meet your needs.
( 2 )
$38.79
Peterson Fluid Systems ball valves are designed to make your next plumbing job easy and safe. Each ball valve is machined from top quality aluminum and given a durable and hard anodized finish and fluropolymer seals to ensure durability even in harsh environments. Peterson offers these ball valves in a variety of configurations from size to fitting selection, making sure you can find the right one for your project. Best of all, Peterson Fluid System ball valves are completely re-buildable! Make shutting off fuel or oil easy while maintaining full flow when needed with Peterson Fluid Systems ball valves.
Not Yet Reviewed
$189.99
—
$249.99
Make fuel checks simple with Aeromotive's billet fuel sample valves. Depending on the model you select, the aluminum units can install into your 1/8 in. NPT inlet port with threads or quick-connect attachment. Some contain a stainless steel barb fitting for extension hoses and rotate 360 degrees for easy sampling. A spring-loaded safety feature keeps the sample valve sealed when unlocked, and rotates into a locked position when it's time for racing. When a fuel sample is required, simply rotate the valve to the unlocked position, press down for a fuel sample, re-lock, and go race!
( 7 )
$126.45
—
$210.45
These Wilwood brake shut-off valves are designed to block pressure from reaching the brake system. They will not prevent fluid from returning to the master cylinder, eliminating the possibility of trapping pressure when activated. The valves require a 12 V, 5 amp fused power source activated through a toggle switch for operation.
( 3 )
$179.61
Surplus units were widely used in fuel systems for decades. However, the surplus synthetic rubber seals are not always compatible with current hydrocarbon fuels and/or additives. Earl's has redesigned the original surplus valves with modern elastomers, which are not affected by most fuels and lubricants.
( 8 )
$111.95
—
$155.95
Vibrant Performance shut-off valves allow you to easily control the flow of fluid with just a simple flip of a switch! They feature large handles that make them easy to use, and they're also clearly marked for proper flow direction. They're manufactured from 6061 aluminum and then given a black anodized finish for added durability. Vibrant Performance shut-off valves are available in a variety of AN sizes to best suit your application requirements.
( 2 )
$39.50
—
$73.99
Aeromotive high-flow one-way check valves are designed to prevent back-flow with minimal pressure drop. AN O-ring male inlet/female outlet connections allow easy installation into a fuel pump outlet port without adding additional lines, hose ends, or fittings. They're ideal for use when preventing drainback after the fuel pump is turned off, or when dual pumps are employed and both pumps will not always be running together. CNC-machined from 6061-T651 billet aluminum alloy with a Type II bright dip anodized finish, the fuel check valves are available in multiple sizes.
( 10 )
$111.45
—
$136.95
Upgrade your tank drain with Moroso ball valves. They feature high-quality, heavy-duty construction and are easier to open and close than your current petcock.
( 7 )
$27.99
Holley roll over valves are optional fittings designed for their in-tank retrofit fuel modules. Holley has made it easy to convert to an EFI fuel system, and to maintain safety by adding these valves to vent your fuel tank and prevent leaking in case of an accident or roll over. They are crafted from aluminum and black anodized for add durability.
( 1 )
$29.96
Snow Performance check valves are high-flow inline water methanol valves that offer superior safety and flow compared to other water methanol check valves on the market. They are custom-made with 100 percent methanol-resistant stainless steel springs and EPDM seals, ensuring zero corrosion even with high concentrations of methanol. The aluminum valves are available in different sizes and finishes—even in quick-connect models.
( 2 )
$31.24
Maintain proper braking with Dorman power brake booster check valves. They are built to OEM specifications and install easily in seconds. The valves are designed to ensure proper vacuum in power boosters for positive braking.
( 27 )
$4.99
—
$11.99
Vibrant Performance offers a wide assortment of components to help you complete any exhaust project. These Vibrant Performance check valves feature high-quality billet aluminum construction and integrated AN fittings at either end.
( 9 )
$42.50
—
$66.99
These Summit Racing™ vacuum check valves will allow you to dress-up your brake booster or vacuum reservoir. They are made from billet aluminum and come in a polished or satin finish.
( 22 )
$25.99
—
$34.99
Keep your distributor vacuum advance working properly with these Standard Motor distributor vacuum advance check valves. They meet or exceed OEM specificatons and are made for a variety of applications.
( 13 )
$8.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
