Availability
Showing In Stock Items. Show All 35 Items.
Make fuel checks simple with Aeromotive's billet fuel sample valves. Depending on the model you select, the aluminum units can install into your 1/8 in. NPT inlet port with threads or quick-connect attachment. Some contain a stainless steel barb fitting for extension hoses and rotate 360 degrees for easy sampling. A spring-loaded safety feature keeps the sample valve sealed when unlocked, and rotates into a locked position when it's time for racing. When a fuel sample is required, simply rotate the valve to the unlocked position, press down for a fuel sample, re-lock, and go race!
( 7 )
$134.20
—
$223.30
Holley fuel cell vent kits keep fumes out by allowing cell to breathe out the vent port. The kits also help prevent fuel cell from being pressurized during use and while filing up. The fittings are anodized to prevent galling of threads and for added corrosion protection. Holley fuel cell vent kits are pump gas and E85 compatible. Complete kit contains: * 6 ft. of 10AN nylon braided hose * Fittings * Rollover valve * Bulkhead * Breather filter
Not Yet Reviewed
$149.95
Holley fuel cell return fitting kits effectively route returning fuel below surface level, eliminating overhead splash. They also minimize erratic fuel pressures caused by turbulent flow and aeration of the fuel, thus keeping fuel pressure consistent. The kits include fitting, hose, and clamp. Features: * 10AN ORB port to 10AN male fitting made of 6061 T-6 aluminum * Anodized fitting prevents galling of threads and corrosion protection * Corrugated tube is flexible to route around foam to bottom of fuel cell * Pump gas and E85 compatible
Not Yet Reviewed
$29.69
Pacific Performance Engineering race fuel valves are made from stainless steel and replace stock or a shimmed pressure relief valve. This valve helps maintain fuel rail pressure during high engine load conditions. The PPE valves eliminate potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient pressure relief valve spring pressure. Order the model recommended for your application.
( 1 )
$41.39
Holley roll over valves are optional fittings designed for their in-tank retrofit fuel modules. Holley has made it easy to convert to an EFI fuel system, and to maintain safety by adding these valves to vent your fuel tank and prevent leaking in case of an accident or roll over. They are crafted from aluminum and black anodized for add durability.
( 1 )
$34.45
Eddie Marine manual control valves enable fuel flow from the right, left, or both tanks—or can shut off the fuel. These valves are manufactured from 6061-T6 aluminum and are available in a polished finish. They also feature 1/2 in. NPT inlets and outlets for high fuel flow. Note: To help deter internal corrosion of valve components, it's recommended that the valve be periodically lubricated. Valves which fail due to internal corrosion are not covered by warranty.
( 1 )
$186.00
Tanks Inc. fuel line check valves are designed to allow flow in one direction and prevent backflow. They feature a 304 stainless steel check piston that delivers optimum flow with minimal restriction and pressure loss. These valves are ideal for fuel systems due to their low opening pressure of 3 psi. Tank Inc. check valves are offered in a choice of sizes to meet your needs.
( 2 )
$37.99
Fuel shut-off valves from Half Scale Dragsters screw into the bottom of your tank with a 1/4 in. fitting for the tank side and a 1/4 in. barb for the fuel line. Although they may not be mandatory in NHRA or IHRA, including Half Scale fuel shut-off valves in your build can enhance safety.
( 1 )
$19.99
JR Race Car fuel shutoff valves install into the bottom of your Jr. Dragster fuel tank and have a 1/4 in. pip for the tank side (use PTFE tape) and a 1/4 in. barb for the fuel line. These shutoff valves feature an easy-to-use, offset-style handle—and for those who've worked on Jr. Dragster cars, you know that having a simple fuel shut-off valve is quite handy!
( 4 )
$26.99
Dorman fuel line check valves are designed to replace a damaged connector without spending time or money on an entire new fuel line. They're made from quality materials, such as brass, and will resist high temperatures that usually lead to cracking. Choose the kit that's compatible with your hose diameter.
( 18 )
$37.95
Performance and reliability begin with All Balls Racing fuel tap diaphragm repair kits. Each kit may contain a diaphragm, spring, O-ring, screws, and other components as needed for your application. Select the kit designed for your on- or off-road powersports ride.
Not Yet Reviewed
$26.56
—
$35.44
Performance and reliability begin with All Balls Racing fuel tap repair kits. Available for several street bikes and off-road machines, each kit contains the components necessary to repair your petcock. Kits may include gaskets, O-rings, screws, washers, and more as needed for your application. Select the kit designed for your motorcycle, dirt bike, or ATV.
Not Yet Reviewed
$16.64
—
$39.61
Surplus units were widely used in fuel systems for decades. However, the surplus synthetic rubber seals are not always compatible with current hydrocarbon fuels and/or additives. Earl's has redesigned the original surplus valves with modern elastomers, which are not affected by most fuels and lubricants.
( 8 )
$127.95
—
$178.95
Aeromotive high-flow one-way check valves are designed to prevent back-flow with minimal pressure drop. AN O-ring male inlet/female outlet connections allow easy installation into a fuel pump outlet port without adding additional lines, hose ends, or fittings. They're ideal for use when preventing drainback after the fuel pump is turned off, or when dual pumps are employed and both pumps will not always be running together. CNC-machined from 6061-T651 billet aluminum alloy with a Type II bright dip anodized finish, the fuel check valves are available in multiple sizes.
( 10 )
$118.25
—
$145.35
Carter check valves are designed to prevent backflow with minimal pressure drop. They're ideal for preventing drainback after the fuel pump is turned off, or when dual pumps are employed but will not always be running together.
( 17 )
$17.99
Summit Bucks
Delphi fuel pump check valves are designed to prevent backflow with minimal pressure drop. The one-way flow replacement valves are ideal for preventing drainback after the fuel pump is turned off—or when dual pumps are employed but will not always be running together.
( 1 )
$17.99
It's assuring to know that control of your fuel is only inches away. Now you can manually close off your fuel flow with one of these Nitrous Express fuel shut-off valves. They're available in a variety of styles, sizes, materials, and finishes.
( 2 )
$35.48
—
$226.41
Vibrant Performance pressure relief valves improve the serviceability of automotive fuel, oil, and coolant systems, by reducing fluid spillage when hoses are removed. When installed at the highest point in a coolant system or component, the pressure relief valve can be used as a bleeder to purge any unwanted air from the system/component. These components are constructed from 304 stainless steel and are black zinc plated. They are compatible with automotive fuel, oil and coolant systems and have been tested for low and high pressure sealing abilities up to 100 psi. The 1/8 in. NPT body design installs with a 7/16 in. wrench (thread tape recommended).
Not Yet Reviewed
$42.99
Vibrant Performance offers a wide assortment of components to help you complete any exhaust project. These Vibrant Performance check valves feature high-quality billet aluminum construction and integrated AN fittings at either end.
( 9 )
$52.50
—
$57.50
These Earl's Performance shut-off valves are ideal for use as emergency fuel shutoffs, drain valves, or even as anti-theft devices. They have a lever design, which makes them quick and easy to use.
( 38 )
$37.43
—
$209.95
Earl's Performance UltraPro ball valves are ideal for all racing applications and provide full uninterrupted flow when opened. The lightweight modular design is easy to rebuild; and the glass-reinforced PTFE seals are compatible with gasoline, racing fuels, methanol, alcohol, E85, oil, water, and coolant. The small body valves are available in -6 and -8 AN sizes; and the large body valves are available in -10 and -12 AN sizes (choose from male/male, or male/female styles). UltraPro ball valves feature an attractive clear and black anodized finish with red handle, a 1/4 in. hole for cable operation—and are curved outward from the body for easy operation (with extra finger clearance, even for drivers wearing racing gloves). These racing ball valves are ideal for use in most fuel and oil systems (i.e. fuel shut-off valves, oil accumulators/accusump systems, and many other applications).
( 22 )
$165.95
—
$209.95
Improved Racing high-flow flapper check valves are ideal for use in oiling systems (wet sump and dry sump), fuel systems, crankcase pressure ventilation systems, and more. Most check valve designs—including poppet check valves, ball check valves, diaphragm check valves, piston check valves, and others—are restrictive, resulting in a pressure drop across the valve even when fully open. Improved Racing's check valves use a flapper design, originally developed for military jet engine turbines, that swings completely out of the fluid's flow path, adding virtually no flow restriction. These check valves were further optimized for low restriction at high flow rates using flow simulation software—and were designed to exceed most military specification requirements. The valves have been tested at up to 1,000 psi of backflow holding pressure without catastrophic failures or excessive leakage. This allows Improved Racing to very safely rate these valves to hold 300 psi of backflow pressure under normal operating conditions with a very high factor of safety. For comparison, the military surplus flapper check valves tested failed catastrophically with complete pressure loss at less than 200 psi. This flapper-style valve has a very low cracking pressure of less than 0.05 psi. Every internal component (hinge, spring, hinge pin, and gasket core) is made from stainless steel to ensure long-lasting, reliable performance and compatibility with just about any fluid, including corrosive fluids. The check valve's gasket is made from FKM (Viton®) rubber bonded to a stainless steel core, giving it a high operating temperature of up to 302 degrees F. It's also highly chemical-resistant and compatible with all types of fuel. Improved Racing's check valves are available in multiple fitting sizes, and the inlet and outlet halves can be mixed and matched to create a completely custom valve. Features and specifications: * Flapper design allows for very high flow with low restriction * Design optimized using flow simulation software * FKM (Viton®) rubber seal * All stainless steel internal components for compatibility with a wide range of fluids * 6061-T6 billet aluminum body with black MIL-A-8625 Type II anodized finish * Laser marked with flow direction and hinge location per military specification * Maximum operating backflow holding pressure of 300 psi, burst backflow holding pressure of over 1,000 psi * Maximum unchecked (normal direction of flow) operating pressure of over 1,000 psi * -40 to 302 degrees F operating temperature rang * Lifetime Warranty
Not Yet Reviewed
$149.00
—
$159.00
Russell check valves are designed to allow flow in one direction and prevent flow back. They feature a 304 stainless steel check piston that delivers optimum flow with minimal restriction and pressure loss. A positive O-ring seal is incorporated into the high-flow check piston. These valves are ideal for fuel systems due to their low opening pressure of 3 psi. Russell check valves are offered in a choice of sizes to meet your needs.
( 11 )
$33.95
—
$52.95
Peterson Fluid Systems ball valves are designed to make your next plumbing job easy and safe. Each ball valve is machined from top quality aluminum and given a durable and hard anodized finish and fluropolymer seals to ensure durability even in harsh environments. Peterson offers these ball valves in a variety of configurations from size to fitting selection, making sure you can find the right one for your project. Best of all, Peterson Fluid System ball valves are completely re-buildable! Make shutting off fuel or oil easy while maintaining full flow when needed with Peterson Fluid Systems ball valves.
Not Yet Reviewed
$199.99
—
$225.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
