Filters
Eddie Marine manual control valves enable fuel flow from the right, left, or both tanks—or can shut off the fuel. These valves are manufactured from 6061-T6 aluminum and are available in a polished finish. They also feature 1/2 in. NPT inlets and outlets for high fuel flow. Note: To help deter internal corrosion of valve components, it's recommended that the valve be periodically lubricated. Valves which fail due to internal corrosion are not covered by warranty.
( 1 )
$186.00
These Earl's Performance shut-off valves are ideal for use as emergency fuel shutoffs, drain valves, or even as anti-theft devices. They have a lever design, which makes them quick and easy to use.
( 36 )
$144.95
—
$182.95
Earl's Performance UltraPro ball valves are ideal for all racing applications and provide full uninterrupted flow when opened. The lightweight modular design is easy to rebuild; and the glass-reinforced PTFE seals are compatible with gasoline, racing fuels, methanol, alcohol, E85, oil, water, and coolant. The small body valves are available in -6 and -8 AN sizes; and the large body valves are available in -10 and -12 AN sizes (choose from male/male, or male/female styles). UltraPro ball valves feature an attractive clear and black anodized finish with red handle, a 1/4 in. hole for cable operation—and are curved outward from the body for easy operation (with extra finger clearance, even for drivers wearing racing gloves). These racing ball valves are ideal for use in most fuel and oil systems (i.e. fuel shut-off valves, oil accumulators/accusump systems, and many other applications).
( 22 )
$144.95
—
$182.95
These Tilton flow control valves work by restricting the return flow of the hydraulic fluid by a tunable amount, reducing shock loads to the driveline by allowing the clutch to slip slightly during engagement. They do not restrict flow during release. The shock load is a result of an abrupt clutch engagement when the crankshaft and input shaft speeds are not precisely matched. The Tilton Flow control valves are designed to reduce the risk of traction loss when downshifting and reduce the chance of damaging driveline components.
( 1 )
$165.75
Improved Racing high-flow flapper check valves are ideal for use in oiling systems (wet sump and dry sump), fuel systems, crankcase pressure ventilation systems, and more. Most check valve designs—including poppet check valves, ball check valves, diaphragm check valves, piston check valves, and others—are restrictive, resulting in a pressure drop across the valve even when fully open. Improved Racing's check valves use a flapper design, originally developed for military jet engine turbines, that swings completely out of the fluid's flow path, adding virtually no flow restriction. These check valves were further optimized for low restriction at high flow rates using flow simulation software—and were designed to exceed most military specification requirements. The valves have been tested at up to 1,000 psi of backflow holding pressure without catastrophic failures or excessive leakage. This allows Improved Racing to very safely rate these valves to hold 300 psi of backflow pressure under normal operating conditions with a very high factor of safety. For comparison, the military surplus flapper check valves tested failed catastrophically with complete pressure loss at less than 200 psi. This flapper-style valve has a very low cracking pressure of less than 0.05 psi. Every internal component (hinge, spring, hinge pin, and gasket core) is made from stainless steel to ensure long-lasting, reliable performance and compatibility with just about any fluid, including corrosive fluids. The check valve's gasket is made from FKM (Viton®) rubber bonded to a stainless steel core, giving it a high operating temperature of up to 302 degrees F. It's also highly chemical-resistant and compatible with all types of fuel. Improved Racing's check valves are available in multiple fitting sizes, and the inlet and outlet halves can be mixed and matched to create a completely custom valve. Features and specifications: * Flapper design allows for very high flow with low restriction * Design optimized using flow simulation software * FKM (Viton®) rubber seal * All stainless steel internal components for compatibility with a wide range of fluids * 6061-T6 billet aluminum body with black MIL-A-8625 Type II anodized finish * Laser marked with flow direction and hinge location per military specification * Maximum operating backflow holding pressure of 300 psi, burst backflow holding pressure of over 1,000 psi * Maximum unchecked (normal direction of flow) operating pressure of over 1,000 psi * -40 to 302 degrees F operating temperature rang * Lifetime Warranty
Not Yet Reviewed
$149.00
—
$159.00
Peterson Fluid Systems ball valves are designed to make your next plumbing job easy and safe. Each ball valve is machined from top quality aluminum and given a durable and hard anodized finish and fluropolymer seals to ensure durability even in harsh environments. Peterson offers these ball valves in a variety of configurations from size to fitting selection, making sure you can find the right one for your project. Best of all, Peterson Fluid System ball valves are completely re-buildable! Make shutting off fuel or oil easy while maintaining full flow when needed with Peterson Fluid Systems ball valves.
Not Yet Reviewed
$189.99
—
$249.99
These Wilwood brake shut-off valves are designed to block pressure from reaching the brake system. They will not prevent fluid from returning to the master cylinder, eliminating the possibility of trapping pressure when activated. The valves require a 12 V, 5 amp fused power source activated through a toggle switch for operation.
( 3 )
$179.61
Make fuel checks simple with Aeromotive's billet fuel sample valves. Depending on the model you select, the aluminum units can install into your 1/8 in. NPT inlet port with threads or quick-connect attachment. Some contain a stainless steel barb fitting for extension hoses and rotate 360 degrees for easy sampling. A spring-loaded safety feature keeps the sample valve sealed when unlocked, and rotates into a locked position when it's time for racing. When a fuel sample is required, simply rotate the valve to the unlocked position, press down for a fuel sample, re-lock, and go race!
( 7 )
$124.98
—
$210.45
Surplus units were widely used in fuel systems for decades. However, the surplus synthetic rubber seals are not always compatible with current hydrocarbon fuels and/or additives. Earl's has redesigned the original surplus valves with modern elastomers, which are not affected by most fuels and lubricants.
( 8 )
$111.95
—
$155.95
Aeromotive high-flow one-way check valves are designed to prevent back-flow with minimal pressure drop. AN O-ring male inlet/female outlet connections allow easy installation into a fuel pump outlet port without adding additional lines, hose ends, or fittings. They're ideal for use when preventing drainback after the fuel pump is turned off, or when dual pumps are employed and both pumps will not always be running together. CNC-machined from 6061-T651 billet aluminum alloy with a Type II bright dip anodized finish, the fuel check valves are available in multiple sizes.
( 10 )
$108.95
—
$136.95
PWR North America fabricated check valves ensure directional water flow through your entire cooling system. Yes, they have the same function as the universal type valves but are offered as a less expensive, lighter weight alternative to racers that won't be reconfiguring their plumbing. They are designed to fit the current radiator plumbing and are available in AN and push-on hose sizes. Racers, get the same flow with less weight and more value when you choose PWR North America fabricated check valves.
Not Yet Reviewed
$207.00
Holley fuel cell vent kits keep fumes out by allowing cell to breathe out the vent port. The kits also help prevent fuel cell from being pressurized during use and while filing up. The fittings are anodized to prevent galling of threads and for added corrosion protection. Holley fuel cell vent kits are pump gas and E85 compatible. Complete kit contains: * 6 ft. of 10AN nylon braided hose * Fittings * Rollover valve * Bulkhead * Breather filter
Not Yet Reviewed
$129.95
AFCO Racing brake shut-off valves include fittings and can be easily installed in your brake system to control the flow of fluid. They feature a corrosion-resistant stainless steel ball for long-lasting durability.
Not Yet Reviewed
$116.99
Waterman Racing shut-off valves are valuable plumbing accessories. Constructed from aluminum with an anodized finish, the valves are available for different inlet/outlet sizes. Order the model needed for your application.
( 1 )
$138.99
—
$227.99
Peterson Fluid Systems panel mount ball valves are designed to make your next plumbing job easy and safe while maintaining a clean installation. Each ball valve is machined from top quality aluminum and given a durable and hard anodized finish and fluropolymer seals to ensure durability even in harsh environments. Peterson offers these ball valves in a variety of configurations from size to fitting selection, making sure you can find the right one for your project. Best of all, Peterson Fluid System ball valves are completely re-buildable! The panel mount design makes installation clean and sturdy, and is perfect to external or dash mounted shut-offs. Make shutting off fuel or oil easy while maintaining full flow when needed with Peterson Fluid Systems ball valves.
Not Yet Reviewed
$172.99
—
$187.99
It's assuring to know that control of your fuel is only inches away. Now you can manually close off your fuel flow with one of these Nitrous Express fuel shut-off valves. They're available in a variety of styles, sizes, materials, and finishes.
( 2 )
$226.41
These Standard Motor Products ported vacuum switches are designed to open and close the vacuum signal path with changes in coolant temperature. These switches can be used to control vacuum-activated components on your ride.
( 10 )
$104.99
—
$145.99
Eddie Marine water shut-off ball valves are ideal for use as water shut-offs on external water pick-ups. These valves are offered in natural or polished stainless steel and natural brass. All valves feature stainless steel balls. Eddie Marine water shut-off ball valves are available in several sizes and psi ratings.
Not Yet Reviewed
$149.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
