Availability
These Summit Racing™ dual feed fuel lines are a great addition to any fuel system. The pre-assembled fuel lines clean up your engine compartment and properly deliver fuel to your carburetor. Available in multiple sizes and styles to suit your needs.
( 448 )
$49.99
—
$74.99
Summit Racing™ fuel lines are a great addition to any fuel system. They include all necessary hardware for an easy installation on your Edelbrock, Holley, Carter, or Summit carburetor. Available in multiple styles to suit your needs.
( 261 )
$20.99
—
$54.99
Summit Racing™ premium braided nylon hose will handle today's fuels and pressures--plus keep you on budget! Our race hose is certified for use with E-85, as well as additives currently found in diesel, ethanol, and alcohol based-fuels. And, these 30R9 tested and approved hose features burst pressure to 500 psi with minimal permeation. The hose is built with 4-ply lightweight--lighter than stainless braided hose--construction with an FKM fluoroelastomer lining and is reinforced with a braid of stainless steel. The design and materials work to eliminate fuel permeation under extreme and extended conditions that lead to sour gas odors and dry, cracked hose. Summit Racing™ premium braided nylon hose offers superior compatibility with fuels, as well as strength and value for you and your race car.
( 52 )
$24.99
—
$190.99
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 42 )
$7.99
—
$222.99
The fuel additives used in today's vehicles can cause your conventional rubber hoses to breakdown over time. Earl's Performance EFI Vapor Guard hoses are a unique, 3-layer barrier to fuel penetration. Vapor Guard's secret is in its layers. The innermost primary barrier layer offers high resistance to heat and aggressive fuels. The middle barrier is a thermoplastic layer that provides superior fuel isolation and virtually eliminates vapors from escaping through the hose. The exterior over-barrier provides extreme tolerance to heat and ozone, giving Vapor Guard hoses a 3-way shield against hose deterioration. Make sure that your vehicles get the fuel they need to get you where you need to go.
( 34 )
$6.75
—
$159.95
On Sale
Summit Racing™ Premium reinforced rubber hoses offer the perfect choice for all your performance fuel, oil, and water fluid transfer needs. Today, the paraffins and additives found in commercial- and performance-bought fuels and oils have become too much for old school conventional rubber hose, causing premature deterioration. Our Summit™ Premium reinforced rubber hoses consist of a multi-layer wall, preventing fuel infiltration from within the hose or evaporating into the atmosphere, as well as offering high resistance to heat and providing superior fluid flow to effectively eliminate premature failure. Available in several diameters and lengths, these synthetic twined reinforced hoses will stand up to the most corrosive additives found in the market today. They are SAE J30R9 rated and safe to use with alcohol, methanol, E85, E97, water, coolant, and oil. Select the size(s) needed for your project.
( 4 )
$120.99
$18.99
—
$99.99
If you live in a cold climate, efficient heat transfer is important for the cost-effective operation of your vehicle. Dayco has the solution with their Insulone heater hoses. These premium hoses deliver heated coolant to your heater core with a minimal loss of heat. Constructed from a synthetic EPDM rubber compound, they are spiral-reinforced and feature an insulating layer with a special compound for excellent burst strength and heat resistance. Dayco Insulone heater hoses are compatible with all common coolants and coolant additives.
( 5 )
$52.99
—
$306.99
Upgrade your cooling system with Cold Case silicone hose kits that add style and performance to your ride. All Cold Case radiator hose kits come with super smooth and heat-resistant 5mm thick hose walls. While most competitors' versions are made from inferior 3-ply material, Cold Case uses only 4-ply material for superior performance. Additional features of Cold Case silicone hose kits include: * Designed specifically for particular makes and models * Made of high-quality silicone for enhanced strength and durability * Direct-fit replacements for stock rubber hoses * Available in a choice of colors
( 5 )
$76.54
—
$185.54
Tanks Inc. offers Russell Twist-Lok fuel hose for those demanding quality. The hose is flexible, lightweight, and ideal for most of your automotive applications. Compatible with hydrocarbon and alcohol-based fuel, lubricants, and additives, the hose works with all-AN adapter fittings. Mate them to reusable Twist-Lok hose ends pressure-rated up to 250 psi, which is suitable for most fuel and oil systems. Save yourself some assembly time and money with quality Twist-Lok hose delivered through Tanks.
( 4 )
$17.99
—
$87.99
On Sale
Holley power steering hard lines offer a clearance solution. The pressure hose connection on the Type II power steering pump is really close to the pulley making it difficult to attach the hose. Holley power steering hard lines move the connection behind and below the pump for clearance and improved appearance. The special banjo bolt and crush washers provide additional clearance. Holley also includes a mounting bracket that makes the hardline stronger and less likely to crack from vibration or abuse. The kits are made from strong steel and zinc plated.
( 3 )
$127.95
$70.85
—
$119.95
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$2.99
—
$308.99
JET carburetor fuel lines give your installation professional fit, function, and style. Made from top-grade stainless steel and hand-polished, they present your Holley or Holley-style carburetor with a custom look of high performance. The fuel lines include aluminum fittings anodized in your choice of several colors, as well as the fittings and gaskets for the carburetor bowls and a -6 AN inlet fitting. Make your engine bay look great with the addition of JET stainless steel carburetor fuel lines.
( 4 )
$74.96
—
$104.96
RT Off-Road brake hose kits contain factory replacements designed to improve your Jeep's performance. They offer additional length for modified vehicles—a must for any lifted rig. The lines feature a tough braided stainless steel outer cover to withstand off-road hazards that may have damaged OE hoses. These RT Off-Road brake kits are available with various hose quantities and lengths, and include all hardware and fittings necessary for installation on your particular Jeep model.
( 8 )
$96.99
—
$109.99
These Spectre SSteel-Flex flexible radiator hoses feature 304 stainless steel braid construction over rubber hose and can be cut up to 1 1/2 in. on each end for custom installations. Plus, they're unaffected by most coolants, antifreezes, and additives, and can resist temperatures in excess of 250 degrees F.
( 37 )
$79.99
—
$99.99
Extremely durable and flexible, Mishimoto AN braided hose is an ideal addition to your vehicle. Whether you're replacing a factory rubber line or adding an oil cooling system, these stainless-wrapped fluid lines are available in multiple sizes and lengths to suit any application. Mishimoto AN lines feature a CPE rubber inner layer which provides a durable passageway for most fuels, oils, and engine coolants, while a woven stainless-steel inner jacket increases the pressure tolerance and durability. Along with unmatched abrasion resistance, the stainless-steel or black nylon braided outer jacket adds unique style to your project. The nylon outer braid will not abrade soft materials such as plastic or aluminum in confined spaces. They feature an operating temperature range from -40 degrees F to 300 degrees F and pressure rating of up to 1,000 psi, making them applicable for most fluids or air passage systems on your vehicle. Mishimoto's AN braided hose is available in different hose sizes and lengths, and are covered by their Lifetime Warranty.
Not Yet Reviewed
$13.95
—
$94.95
S.U.R.&R. Max Flex brake line alloy tubing is the ideal solution for easily bending and installing replacement fluid lines. This quality copper nickel tubing can be used for brake, fuel, power steering, transmission, and related line applications. It's flexible for easy bending by hand; no bending tools required. Additional notes: * Avoids kinking * Rust and corrosion-resistant line material * Excellent for use in harsh environments * Available in 3/16 in., 1/4 in., 5/16 in., and 3/8 in. sizes
Not Yet Reviewed
$34.99
—
$50.99
Mishimoto offers radiator coolant hoses for a wide range of vehicles, including many early 2000s Ford Powerstroke applications. These replacement hoses are constructed from a combination of high-grade silicone and four layers of heat-resistant embedded fibers to provide the ultimate upgrade in reliability, durability, and performance. They include a lower overflow hose specifically for select models. Mishimoto Powerstroke hoses retain factory fitment and offer a metal Y-fitting for increased temperature and pressure tolerance to keep your truck on the road and out of the garage. Whether your Ford is stock or modified, trust Mishimoto and their line of Powerstroke performance parts to keep your engine cool. Additional details: * Perfect upgrade to the factory rubber hoses * Replaces the weak plastic Y-fitting on the factory hose with a CNC metal fitting * Available in black, blue, or red
( 1 )
$65.95
—
$125.95
Engine Works carburetor feed lines are a great addition to any fuel system to clean up your engine compartment and properly deliver fuel to your carburetor. The stainless braided hose is rated at 1,000 psi and is impervious to fuels and will withstand temperatures up to 300 degrees F. Make plumbing your carburetor a simple job by choosing Engine Works carburetor feed lines. Order the model designed for your application needs.
Not Yet Reviewed
$61.81
—
$70.06
Continental heater hoses are original equipment molded heater hoses for popular applications. The tube in Continental's universal or pre-curved molded heater hoses is made with Versigard rubber--a compound that's highly resistant to heat, oil, and weather. The patented knit reinforcement is made with Tylanar fabric--a material that meets or exceeds the requirements of SAE J20R3, D1. Additional features include: * Designed for those vehicles requiring multiple or severe bends * Original configurations to ensure a perfect fit * Fits popular applications * Rugged construction
( 26 )
$6.99
—
$244.99
Helix stainless steel braided brake lines are a high-quality, attractive addition to the finer aesthetics and underhood appeal of any classic ride, hot rod, or even an ordinary daily driver. Made from finest quality steel tubing and rust and corrosion-resistant gold zinc iridite coated ends and hardware, Helix stainless steel braided brake lines are durable and will hold up under the most extreme conditions. Where attention to detail is the key to a finished, professional appearance, and showroom appeal, Helix has it covered with these beautifully crafted stainless steel braided line kits. The kits include DOT-approved braided stainless steel brake lines and necessary hardware.
( 1 )
$79.95
Trail Gear extended brake lines are a must for lifted vehicles when the stock brake lines are not long enough. They are constructed from extruded PTFE hose with permanently crimped zinc-plated steel fittings. The brake hose is protected from debris and abrasion by a braided stainless steel wire cover. In addition, a clear PVC outer jacket helps to provide extra protection against debris, abrasion, and corrosion. For quality made brake lines that will hold up to your off-roading adventures Trail Gear has you covered.
( 1 )
$99.99
On Sale
Aeromotive dual-action adjustable fuel logs incorporate new features previously unavailable. Each carburetor inlet uses a ball and socket assembly that swivels 20 degrees, allowing additional clearance for throttle stops, throttle linkage, and other accessories. They offer a healthy inlet that can feed high-horsepower engines and feature manufacturing from quality materials and a strong finish, providing durability and great looks. They also provide dual NPT ports (machined in) that allow you to install fuel pressure gauges or pressure transducers. Set a new standard for your ride with the Aeromotive dual-action adjustable fuel logs quality-engineered to fit!
( 4 )
$452.50
—
$881.65
$407.25
—
$793.48
Give your important hoses, tubing, and wiring a custom, braided look while providing them additional protection from heat, cuts, and cold with Made For You Hot Rod braided sleeving kits. Made from braided expandable nylon, these kits will cover heater hoses, radiator hoses, and vacuum lines, or bundle electrical wires. Colors coordinate with Made For You's T-clamps and "Smoothie" wire loom separator kits to produce a professional, finished appearance for your engine compartment. The kits include enough material to complete an entire engine compartment.
( 10 )
$55.95
Radium Engineering submersible fuel tubing is commonly used for plumbing in-tank submerged fuel pumps. The flexible convoluted tubing is manufactured from polyamide nylon and is resistant to all fuel types, including alcohol blends, such as E85. Radium tubing is suitable for EFI fuel pressure and available in two inner diameters and four lengths. Stainless steel clamps are included with each, and all tubes are translucent white except the 8.2 in. which are opaque black. Additional features, benefits, and specs: * Available I.D. of 5/16 in. (8mm) and 3/8 in. (10mm) * Available lengths: 12.8 in., 6.5 in., 17.7 in., and 8.2 in. * When installing, run hot water over the ends first to loosen the material, allowing the tubing to fit snugly over the barb * Torque the re-useable stainless steel SAE J1508 clamps to 13.3 lbs./in. * Clamps provide a 360 degree seal with rolled edges to protect the tubing * Working pressure: 300 psi * Burst pressure: 450 psi
( 3 )
$18.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
