Availability
Showing In Stock Items. Show All 23 Items.
On Sale
Trail-Gear high-pressure power steering hose kits are great for your custom-length setups. The hoses are made from black oil-resistant high-temperature NBR rubber that's reinforced with high-tensile steel wire over a polyester braid. The outer coverings are neoprene-impregnated oil-resistant polyester braid. Features and kit contents include: * No. 6 SAE 100R5/SAE J1402 high-pressure power steering hose * Rated working pressure of 2,250 psi * Minimum bursting pressure of 9,000 psi * Suitable for use in temperatures of -40 degrees F to +275 degrees F * 120 in. of No. 6 high-pressure hose, two straight No. 6 JIC fittings, and two 90 degree No. 6 JIC fittings
( 11 )
$119.99
$101.99
On Sale
These Quick Fuel carburetor fuel lines are designed to keep the guesswork out of carburetor hookups. They come available for multiple brands of carburetors and in different forms for a variety of applications.
( 99 )
$130.95
—
$159.95
$117.85
—
$143.95
On Sale
Fix your leaking transmission lines with Fleece Performance transmission cooler lines. They are heavy-duty, high flow, flexible transmission lines. Direct replacements for OEM lines, the kits come complete with everything needed to get the job done right the first time. Kits include transmission lines, fittings, and zip ties. If you have an OEM replacement or aftermarket radiator, Setrab fittings may be required (sold separately).
( 9 )
$134.99
—
$269.00
$114.74
—
$228.65
On Sale
Holley Sniper EFI Stealth fuel crossover kits are designed to be used with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems. These pre-assembled fuel crossovers are designed to provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. Available in two variations, both contain a braided fuel hose with crimp-on ends for a leak-free installation and two fuel bowl standoffs. One variation includes a T-fitting and the other a black anodized billet fuel regulator, preset to 58.5 psi, and a mounting bracket.
( 1 )
$127.95
$115.15
On Sale
When installing a SAS kit on your Tacoma, the rack and pinion must be removed and replaced, usually with an 1986-95 Toyota IFS power steering box. Trail-Gear has developed a power steering hose conversion kit that will allow you to remove your rack and pinion and install an IFS box in its place. Trail-Gear power steering hose conversion kits come with all the necessary hoses, clamps, and fittings to get the job done right. Choose the proper kit for your vehicle.
Not Yet Reviewed
$159.99
$135.99
On Sale
Mr. Gasket black nylon braided AN hose features a special fluoroelastomer inner liner and are lighter weight than traditional stainless braided hoses. The hose is designed for use with Mr. Gasket swivel, Earl's swivel-seal, or Earl's auto-fit hose ends. Order the hose application suited to fit your needs.
( 1 )
$157.95
$142.15
On Sale
Superlift Bulletproof Kevlar® reinforced braided stainless steel brake lines are constructed of a PTFE inner bladder surrounded by a Kevlar® reinforcing braid. They're covered with a rubber sheathing, stainless steel braid, and an outer plastic sheathing for unmatched strength and protection from foreign objects. They also feature a steel leader at the end to make sure the lines are routed away from any moving suspension components.
( 13 )
$179.99
$152.99
On Sale
Fleece Performance HP fuel line adaptation kits allows you to upgrade to a newer style pump. Each kit includes a new high-pressure fuel line, high-flow feed and return fittings, and feed line and hose clamps. Convert your 5.9L CP3 to a newer 6.7L CP3-style pump with a Fleece Performance exclusive adaptation kit.
Not Yet Reviewed
$119.99
$101.99
On Sale
Replace or upgrade factory rubber radiator hoses with aFe's reliable BladeRunner upper and lower radiator hose kit. Designed to fit aFe or factory radiators, the kit includes 5-ply, polyester-reinforced premium silicone hoses and stainless steel T-bolt clamps. BladeRunner upper and lower radiator hoses are routed to factory mounting locations for a simple, durable, secure installation. Order the kit recommended for your vehicle application.
( 3 )
$185.85
$167.27
On Sale
These high-temperature elastomeric auto-flex hoses are ideal for almost all street and marine applications, and many non-critical competition uses. These high-quality hoses have a nice looking stainless braided outer cover that protects the synthetic rubber inner liner, allowing continuous operating temperatures of -40 degrees to 300 degrees F. These auto-flex hoses are good for fuel, oil, water, and many other fluids.
( 30 )
$265.95
—
$349.95
$146.95
—
$192.95
On Sale
Trail-Gear offers radiator hoses for a variety of applications, including many Toyota and Suzuki trucks from 1981 and up. These silicone replacements will provide your engine with a one-of-a-kind advantage in performance and style. The kits are dual layered, combining high-grade silicone and heat-resistant embedded fibers—which will provide exceptional and efficient heat reduction and increased pressure tolerance, giving you peace of mind and years of satisfaction. The radiator hose kits are a direct OEM fit. All silicone hoses are 3-ply polyester reinforced construction with a temperature range from -20 to 350 degrees F. The advantage that a silicone radiator hose has over a standard rubber radiator hose is that the silicone hose can handle much greater temperatures—and they're resistant to ozone exposure, oil, and other engine fluids and electrochemical degradation. All of which means that silicone radiator hoses last about five times longer than a standard rubber radiator hose. Notes: * Trail-Gear silicone radiator hoses are high gloss, black in color, and are shipped with stainless steel hose clamps * Some trimming may be required from either end of each hose for proper fitment. May not work with 2 in. or larger body lifts * These hoses meet and exceed SAE J20 standards * Order the model recommended for your vehicle
( 1 )
$129.99
$110.49
On Sale
The packaging envelopes of the modern racing car become tighter each year, leaving less room for auxiliaries such as plumbing. At the same time, it becomes more and more difficult to get the cars down to minimum weight. Earl's Performance Ultra-Flex 650 hose solves these issues. Earl's finest and lightest hose combines a woven, ultra-light KEVLAR® braid with smooth-bore PTFE tubing for increased flow and convoluted outside for incredible flexibility. It also has significantly higher flow and pressure ratings than conventional convoluted PTFE hose. Earl's Performance Ultra-Flex 650 hose is 60 percent lighter than their stainless braid-protected synthetic rubber hose. You have spent a lot of time, energy, and money on your race engine, and you should bring life-sustaining fluid to it with the best hose on the market today--Earl's Performance Ultra-Flex 650 hose.
Not Yet Reviewed
$226.95
$124.95
On Sale
Don't ruin excellent engine modifications by putting a new bend in old fuel lines. Fleece Performance high-pressure fuel lines are OEM-quality, look great, and come with M14 x 1.5 fittings. Use them for straight lines, and get one of our quality benders (not included) for perfect angles and a professional appearance. Fleece 8mm high-pressure fuel lines are available in lengths ranging from 7 in. to 24 in.
Not Yet Reviewed
$179.99
$152.99
On Sale
Earl's Super Stock hose is high-quality synthetic rubber tubing, reinforced by a full-coverage interior braided fabric sheath. This superior replacement hose for original equipment applications has recently found favor with professional racing teams. Available in blue or black, Super Stock is rated at 250 psi and 250 degrees F continuous service. To prevent collapse in suction service or for very tight bends, Earl's supplies an internal spiral reinforcing wire. It's suitable for fuel, oil, and water. Order the hose size, length, and diameter needed for your applications.
( 14 )
$219.95
—
$226.95
$120.95
—
$124.95
On Sale
APR braided stainless steel brake line upgrades are a direct-fit replacement that improves your braking experience with the best lines on the market today. Forget the factory rubber hoses that expand and can even rupture over time. These braided 304 stainless steel lines with a smooth-bore PTFE core allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel, as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, APR brake lines are application-specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive PVC outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft at 1,000 psi and 0.11 cc/ft at 2,900 psi. They're compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. Order the lines recommended for the front and/or rear of your vehicle.
Not Yet Reviewed
$209.95
$115.95
—
$188.95
On Sale
Summit Bucks
Boost Products USA reinforced silicone vacuum hoses are suitable for intercooler systems, intakes, water lines or similar. They can withstand up to 1 bar / 14.5 psi of pressure and temperatures from -40 to 430 degrees F (220 C). The wall thickness is 3.5mm. The silicone is highly durable and flexible, stable and retains its color even after many years of use. That's why many motorsports teams trust in Boost Products hoses. They are available in a variety of lengths, colors, and inner diameters. (Note: Silicone hose should not be used as fuel line, oil line or vacuum line for power brake systems.)
Not Yet Reviewed
$130.31
—
$290.18
$117.28
—
$261.16
On Sale
Stillen is proud to offer an active brake cooling option for R35 GT-R owners looking to improve track times and lower brake temperatures. These rear brake cooling kits are for use with both traditional iron rotors, as well as the Stillen carbon ceramic matrix brake kit. During the development of the Stillen GT R Targa rally car, Team StiIlen worked very closely with the engineers at AP Racing to develop the first aftermarket carbon ceramic brake kit in the world. One of the key components of that kit was brake cooling. Carbon ceramic brakes have an ideal operating temperature range where they perform at their best. They work well when cold, but their true performance shines through during repeated hard, high-temperature braking. However, there is a temperature threshold which should not be exceeded. During the development of the kit the engineers at AP Racing asked what we would be doing for brake cooling. We were open to all input from AP, and their instructions were to use external fans directing air to the rotors and calipers. They said regardless of how hot the air is coming off the engine, it's a lot cooler than the heat coming off the rotors. To test the performance of its Active Brake Cooling Kit, Stillen went to El Toro Air Force Base with temperature sensors on each rotor and caliper. They ran the tests with the active cooling on one side of the car, and not the other. They performed a series of 140-0 runs as well as laps around the test track. They also put temperature sensor stickers on each caliper that act just like temperature paint for the rotor. As the temperature of the caliper increases, it burns off parts of the sticker—so it was known how hot the caliper is running. After all of the data was collected and analyzed, engineers determined that this brake cooling kit successfully reduced rotor temperatures by over 200 degrees. The front brake cooling kit consists of a weather-resistant electric fan, mounting brackets, wiring kit and switch, and polyurethane air diversion splitter. The rear brake cooling kit consists of polyurethane air scoops which take advantage of the factory NACA ducts in the belly pan, accordion tube, polyurethane air funnel and mounting bracketry. Stillen brake cooling kits are offered as separate front and rear kits. During testing, Stillen also found that with the VDC off, the rear brake cooling isn't 100 percent necessary. Because brakes work better with a bit of heat in them, Stillen prefers to leave the brake cooling kit off of the car when Steve Millen drives because he does not utilize the VDC control system. If you are like 99 percent of GT-R owners, you more than likely utilize the VDC function—and therefore the rear brake cooling system is recommended. While developed to aid in the necessary cooling for the carbon ceramic brake setup, these kits are also extremely effective in lowering caliper/rotor temperatures for both stock iron rotor setups, as well as the AP Racing iron rotor upgrades. Rear kits include: Polyurethane air scoops, accordion tube, air funnel and mounting bracketry.
Not Yet Reviewed
$230.87
$184.70
On Sale
Earl's Performance Pro-Lite 350 hose is constructed from a tough, abrasion-resistant nylon sheathing banded to the textile inner braid that's embedded in the synthetic rubber liner. This gives the hose incredible flexibility, while maintaining the ability to withstand high vacuum and hot oil temperatures. The hoses are rated to withstand a maximum pressure of 350 psi and an operating temperature range of -40 to +300 degrees F. Pro-Lite 350 hose can take the most demanding conditions and still deliver you to the winner's circle.
( 24 )
$411.95
$226.95
On Sale
Earl's Performance UltraPro hoses go way beyond "good enough." Why would you plumb your high performance, high-powered vehicle with traditional rubber hose, even if it's steel braided? Earl's UltraPro Series of stainless steel and polyester braided hoses are designed to withstand today's modern fluids, harsh environments, brutal vibration, flow requirements, and extreme pressures. You no longer need worry about frequent replacement, deterioration from fuels, and the safety hazards of vapors and leaks. And, UltraPro hoses are much lighter, more rugged, more flexible, and offer more flow. All of this, plus great looks, peace of mind, and a price that's hard to argue with—why wouldn't you choose Earl's UltraPro hoses for performance plumbing? Features of superior Earl's UltraPro hoses: * PTFE inner liner impervious to all known fuels, oils, and coolants used in automotive applications, is carbon-infused for static dissipation, and has ultra-low coefficient of friction to promote maximum flow * Double-helix ribbed inner hose liner offers extreme flexibility and full-flow, making tough plumbing jobs a snap with fewer hard connections * Liner is reinforced with an outside glass-fiber wrap for additional strength and integrity * Polyester braid hoses are up to 67 percent lighter, and the stainless steel braid hoses are up to 37 percent lighter than traditional rubber hose with stainless steel braid * Available in popular -6, -8, -10, -12, -16, and -20 AN sizes * Available in specific lengths and bulk to meet your application needs
Not Yet Reviewed
$337.95
$185.95
On Sale
Summit Bucks
Boost Products USA silicone vacuum hoses are suitable for intercooler systems, intakes, water lines or similar. They can withstand up to 1 bar / 14.5 psi of pressure and temperatures from -40 to 430 degrees F (-40 to 220 C). The silicone is highly durable and flexible, stable and retains its color even after many years of use. That's why many motorsports teams trust in Boost Products hoses. The hoses are available in a variety of lengths, colors, and inner diameters. (Note: Silicone hose should not be used as fuel line, oil line or vacuum line for power brake systems.)
Not Yet Reviewed
$111.24
—
$134.61
$100.12
—
$121.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
