Availability
Showing In Stock Items. Show All 53 Items.
Sierra Marine exhaust hoses meet or exceed the original equipment parts they are replacing. Made from durable rubber, Sierra offers several options to service your boating exhaust.
( 1 )
$33.99
—
$37.99
Clearance
Moeller Marine outboard fuel line assemblies use a compounded, EPA- and CARB-approved, UV-resistant hose and primer bulb. They're manufactured to promote maximum fuel flow, while still being low-permeation certified. Assemblies include tank and engine fittings built to OEM specifications for replacement parts. They use O-ring construction on all fittings for tight, leak-free connections and clamshell packaging for proper handling during shipping. You can count on Moeller Marine for outboard fuel line assemblies engineered to the highest standards in the watercraft industry. Order the kit recommended for your motor application. Additional details: * Gasoline and solvent-resistant * Stainless steel clamps * Dual internal check valves
Not Yet Reviewed
$66.99
$26.50
Clearance
Sierra Marine offers Shields Shieldsflex 2 water exhaust hoses in a variety of lengths, inside and outside diameters. The water/exhaust hose has a black synthetic rubber tube and cover, reinforced with wire helix imbedded between plies of HD synthetic cord. It's resistant to exhaust fumes, ozone, mild chemicals, antifreeze, and salt water. This hose is abrasion- and odor permeation-resistant. It now has double the ozone resistance required by the SAEJ2006. Shieldsflex 2 is primarily used for engine intake, wet exhaust connections (use where bends or long lengths are required), bilge pump intake/discharge, scupper lines, toilet intake/discharge, and holding tank vent/pump out. Temperature ranges from -20 to 200 degrees F continuous, 250 degrees F intermittent. This product meets SAE J2006 Type R2 standards.
Not Yet Reviewed
$57.99
$31.50
Eddie Marine stainless steel line assemblies are PTFE lined braided hoses pre-assembled with hydraulically crimped-on stainless steel swivel hose ends. They are not affected by gas, oil, or temperature and will not crack or deteriorate. They are ideal for use as trim lines or for mechanical oil or fuel pressure gauge lines. Eddie Marine stainless steel line assemblies are offered in many lengths to perfectly fit your project needs.
( 1 )
$34.00
—
$40.00
Eddie Marine heavy-duty water hose features a 2-ply reinforced construction that resists salt water, ozone, and the elements. The hose is commonly used for engine cooling, bilge intakes, and drains. Eddie Marine offers heavy-duty water hoses in a variety of diameters and lengths. Order the amount needed for your applications.
Not Yet Reviewed
$30.95
—
$52.95
Eddie Marine Type B fuel vent hose is excellent quality standard fuel hose and meets or exceeds all requirements of new ISO 7469 and SAE J5127 standards. It is resistant to gasoline and alcohol-enhanced fuels. This reinforced-rubber hose can also be used for fuel hose in non-enclosed engine compartments. Order the length and diameter needed for your application.
Not Yet Reviewed
$38.95
Eddie Marine corrugated fuel fill hose is perfect for longer runs which require the tightest bends. The hoses feature multi-ply corrugated construction with a double wire helix embedded between the multiple plies. They are premium-quality, fire-retardant, and resistant to gasoline, diesel, and alcohol-enhanced fuels. Order the length and diameter needed for your application.
( 1 )
$35.95
—
$46.95
Sierra Marine offers molded hose in a variety of sizes and configurations for many different watercraft connections. Whether you captain a Mercruiser, Mallory, or Mercury boat, these OEM replacements are manufactured from quality materials and factory specs to provide the right fit and performance. Refer to the Notes and Applications tab above to find the correct part needed for your application.
Not Yet Reviewed
$23.99
—
$49.99
Sierra Marine power trim hoses replace worn or damaged originals. They are assembled with quality rubber and materials to provide an exact fit and function for an easy install and confidence on the water.
Not Yet Reviewed
$41.99
Eddie Marine wire reinforced water hose is fully embedded with helical wire to add strength and flexibility, making it ideal for water inlet hoses that would normally be prone to collapsing. Eddie Marine offers wire reinforced water hoses in a variety of diameters and lengths. Order the amount needed for your applications.
Not Yet Reviewed
$25.95
—
$49.95
Eddie Marine reinforced vinyl tubing is for use with your marine bilge pump. This heavy-walled clear vinyl hose offers strength and rigidity to help prevent collapse or expansion under pressure. Tubing is available in a variety of lengths and diameters to meet your marine application requirements.
( 1 )
$31.95
—
$47.95
Eddie Marine soft wall fuel fill hose is premium-quality, fire-retardant Type A fuel fill hose that meets or exceeds all requirements of new ISO 7840 and SAE J5127 standards. It is resistant to gasoline, diesel, and alcohol-enhanced fuels. The reinforced rubber hose constructed without wire, making it very pliable for easy installation in tight applications. Multiple length to choose from, order the length that best suits your needs.
( 2 )
$34.95
Eddie Marine Type A fuel hose is premium quality fire-retardant fuel hose that meets or exceeds all requirements of new ISO 7840 and SAE J5127 standards. It is extraordinarily resistant to gasoline, diesel, and alcohol-enhanced fuels. This is the hose required for all fuel lines located within an enclosed engine compartment, and can also be used for fuel vent hose. Order the length, diameter, and operating pressure needed for your application.
Not Yet Reviewed
$53.95
Clearance
Flexzilla SmartFlex RV/marine hoses are made from a hybrid polymer blend material with a durable abrasion-resistant outer cover. They are equipped with an adaptable, swivel handle and large grip on the female end that allows you to use the power of your entire hand to make tight, leak-free connections. SmartFlex hoses provide premium performance and value at a mid-level price point, and are available in a variety of lengths and dimensions to meet your needs. Additional features and benefits: * All-weather flexibility * Kink-resistant under pressure * Lightweight and coils easily * Durable O-ring * Hybrid polymer blend inner tube is drinking water safe * 2-year warranty
Not Yet Reviewed
$26.99
—
$39.99
$24.29
—
$29.50
Summit Racing™ stainless steel multipurpose hard lines are ideal for plumbing your brake or fuel systems. These Marine-grade, 316L Polished stainless lines feature a standard 0.028 in. wall thickness for strength while remining workable and are soft-annealed for easier flaring, cutting and bending compared to other stainless steel lines. Molybdenum is also added for ultimate corrosion resistance. These lines meet SAE J1677 and ASTM A249 specifications. They're rated for a minimum burst pressure of 5,945 psi (and higher depending on line OD) and have been pressure tested and checked for safety. Order the tubing diameter needed for your applications. NOTE: Stainless steel is more difficult to bend and flare, compared to typical steel line. We recommend that a professional-grade flaring tool be used with these lines. Stainless steel can also be difficult to seal when replacing an existing brake or fuel line. The previously installed line can create a wear pattern on the flare seat which will not allow the new stainless steel flare to seal properly. When replacing an existing line we recommend a thorough inspection of the existing brake fitting, fuel fitting, junction block, wheel cylinder, brake caliper, etc. It's possible that the existing component may need to be replaced for a proper seal.
( 10 )
$45.99
—
$58.99
Summit Bucks
ACDelco Gold molded radiator coolant hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. These OE-style hoses are specially designed, GM factory-molded replacements to fit today's smaller, tighter-fitting engine compartments. ACDelco Gold coolant hoses are temperature rated from -40 to 275 degrees F (-40 to 135 degrees C) and are approved for marine applications. Order the model recommended for your vehicle. (Note: Do not use these molded coolant hoses for fuel or oil transfer purposes.) Features include: * Protective sleeves (where applicable) help duplicate General Motors OE for proper fit and function * Designed to resist electrochemical degradation for durability * Available for vintage and heavy-duty applications
( 71 )
$20.99
—
$49.99
Continental fuel fill hose is an extremely flexible hose that fits almost any fuel cell or tank installation. The hose is built from a special synthetic rubber that is exceptionally resistant to heat, ozone, gasoline, methanol, ethanol, and diesel fuels. It's also reinforced with synthetic fabric and steel wire to prevent collapsing or kinking. Continental fuel fill hose is the perfect hose for your next automotive or marine fuel tank installation.
( 16 )
$31.99
—
$52.99
Chevrolet Performance molded radiator coolant hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. These GM OE style factory-molded hoses are specially design to fit today's smaller, tighter-fitting engine compartments. The molded coolant hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and approved for marine applications. Chevrolet Performance manufactures their aftermarket molded coolant radiator hoses to meet your expectations in proper fit, form, and function. Features of Chevrolet Performance molded radiator coolant hoses: * Protective sleeves (where applicable) help duplicate General Motors OE for proper fit and function * Designed to resist electrochemical degradation for durability * Available for vintage and heavy-duty applications Important note: Do not use this formable coolant hose for fuel or oil transfer application.
Not Yet Reviewed
$38.99
Dayco standard heater hoses carry the heated coolant from the engine block to the heater core under the dashboard, and return it to the engine. They're made for general service on light trucks and passenger cars. The ultra-durable hoses are constructed using all EPDM compounds, with spiral reinforcement for high burst strength and heat resistance of -40 degrees F (-40 degrees C) to +257 degrees F (+125 degrees C). These black cover hoses are similar to the SAE 20R3, Class D-2, and are specifically designed to be compatible with all common coolants and coolant additives. However, they are not suitable for fuel or oil transfer. Dayco heater hoses are available in a variety of diameters and lengths.
( 42 )
$49.99
Avoid a potential mishap from a leaking or a blown heater hose--make an upgrade to Continental OE Technology Series HY-T black heater hoses. The HY-Ts are perfect for applications where excellent resistance to antifreeze coolants and extreme underhood temperatures is required. The tube and cover are manufactured from EPDM (ethylene propylene diene monomer) rubber with superior resistance to heat, ozone, and chemical coolants. Each hose is then reinforced with 2-spiral synthetic for additional strength and durability. Continental OE Technology Series HY-T black heater hoses are constructed to meet specifications similar to SAE J20R3--so they can take the heat.
( 36 )
$49.99
Clearance
Continental molded radiator hoses are pre-shaped for specific applications and are constructed to original equipment manufacturers' specifications. They're molded to provide full flow-through tight bends, ease of application, and stress relief on radiator connections. Their tough Versigard rubber tube and cover resist heat, ozone, and chemical coolants—and their Tylanar-knit reinforcement provides burst limits exceeding SAE standards. These hoses meet or surpass SAE J20R4, D1 specifications. Hundreds of models are available for fitment on a wide range of vehicles. Order the length, diameter, and shape designed for your cooling system. When it's time for a replacement, make Continental your first choice for molded radiator hoses.
( 443 )
$43.99
$23.99
—
$43.99
Four Seasons air conditioning suction hoses are your answer for fixing it once and fixing it right. Suction hoses manufactured by Four Seasons are constructed with double-wall barrier hose, gaskets, O-rings, seals, and feature a crimped fitting connection. These hoses meet or exceed the OE-design fitment, form, and function of manufactures' hoses. Four Season air conditioning suction hoses are the choice of automotive enthusiasts wanting a great quality product made to provide long-lasting durability.
( 18 )
$25.99
—
$47.99
UAC takes great pride in their extensive line of hose assemblies, and since hoses are responsible for the weighty task of carrying refrigerant around your A/C system, extensive engineering care and precision is taken, ensuring each assembly is properly produced and meets OE specifications. Universal Air Conditioner offers air conditioning suction and discharge hose assemblies for a wide range of automotive applications. They are manufactured with quality materials to provide the correct fit and performance just like the originals they are replacing. Choose the assembly designed for your vehicle.
( 10 )
$32.99
—
$46.99
Clearance
Sunsong offers power steering hose assemblies for thousands of vehicles from the 1950s and up. The OE replacement hoses are available in a variety of materials and configurations, both in high-pressure and low-pressure options. If you've notice squealing or poor performance when you turn the wheel, you may have a worn hose leaking fluid. Maintain your system with the hose assembly recommended for your application.
( 60 )
$51.99
$29.50
—
$43.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
