Availability
Showing In Stock Items. Show All 45 Items.
DX Engineering Replacement Saddle Clamp Bolts are constructed of durable and corrosion resistant stainless steel and include replacement stainless steel washers and nuts. DX Engineering replacement saddle clamp bolts provide maximum surface contact to prevent slippage. These saddle clamp bolts are perfect for securing aluminum tubing for any antenna, mast or tower project. Replace lost or damaged U and V-bolts with new ones from DX Engineering. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
( 4 )
$5.54
—
$19.99
Vibrant Performance T-bolt hose clamps provide reliable, leakproof connections for your hose and tube assemblies. These clamps are manufactured from T304 stainless steel with rounded band edges to protect soft hose materials, and yet still provide higher tensile strength, durability, and corrosion resistance than other typical worm gear clamps. Vibrant T-bolt hose clamps are ideally suited for medium and heavy-duty applications and include a bolt and locknut. Make all of the right connections with Vibrant Performance!
( 73 )
$14.99
—
$19.79
Summit Racing™ heavy-duty T-bolt clamps provide a 360-degree secure seal under the harshest of conditions. These hose bands are machined from strong stainless steel capable of withstanding up to 10,000 psi of pressure. They're available in nearly a dozen sizes for use with both small and large hose diameters. The T-bolt clamps feature a solid smooth band that prevents them from cutting through the hose material being secured. Feel confident in your hose connections with Summit Racing™ heavy-duty T-bolt clamps!
( 12 )
$6.99
—
$9.99
While ordinary clamps fail under high-pressure conditions, or strip out when tightened, these Summit Racing™ T-bolt hose clamps provide a 360 degree sealing surface to stand up to the pressure. The stainless steel clamps are tightened by a high-strength steel T-bolt, ensuring that they exceed the strength of the hose they are holding. The durable clamps are capable of withstanding burst pressures of up to 10,000 psi for a strong, positive connection that will last a lifetime.
( 88 )
$9.99
—
$13.99
Aeromotive fuel filter T-bolt clamps will hold your fuel filter in place under any driving conditions. They are manufactured from stainless steel and have a natural finish. The Aeromotive fuel filter T-bolt clamps use a special threaded T-bolt that allows for a secure connection that will not loosen over time.
( 6 )
$33.40
—
$39.25
On Sale
Summit Bucks
Boost Products USA offers SS304 stainless steel T-bolt clamps in sizes for a wide range of hose diameters. They provide a high holding force—and include a self-locking nut to prevent the bolt from loosening. This type of clamp is well-suited for charge air piping or silicone hoses. Unlike clamps from many other manufacturers and suppliers, these hose clamps resist rust and corrosion. Note: The bolt and nut are made of galvanized steel (this is needed for an impeccable function).
Not Yet Reviewed
$5.70
—
$7.10
$5.13
—
$6.39
These Mishimoto T-bolt clamps are constructed from rustproof stainless steel and offer improved durability over traditional worm gear clamps. They come equipped with self-locking nuts just to make sure that everything stays in place. The clamps are available in different diameters, so you can choose the size to fit your application.
( 46 )
$7.95
On Sale
Summit Bucks
Boost Products USA offers SS304 stainless steel T-bolt clamps (with spring) in sizes for a wide range of hose diameters. Thanks to the spring, a constant clamping and holding force is always guaranteed. In addition, a self-locking nut prevents the bolt from loosening. These types of clamps are well-suited for intercooler piping and silicone hoses, as they ensure constant strength and tightness. Unlike clamps from many other manufacturers and suppliers, Boost hose clamps resist rust and corrosion. Note: The tightening torque should not exceed 5 Nm. The bolt, spring and nut are made of galvanized steel (this is needed for an impeccable function).
Not Yet Reviewed
$7.06
—
$8.44
$6.35
—
$7.60
Mishimoto tension T-bolt clamps are designed for high-power, turbocharged vehicles--and can handle the demands of extreme heat and pressure. Failing clamps and blown boots are aggravating problems that can result in the end to a day at the strip or a delayed weekend trip. The clamps are constructed of 100 percent stainless steel and provide the reliability and durability you need to keep your vehicle on the road and out of the shop. They are spring-loaded to provide strong and consistent holding power. Mishimoto engineered these clamps to compensate for thermal expansion and to provide peace of mind for even the most extreme pressures.
( 8 )
$6.95
—
$16.95
Vibrant spring-loaded T-bolt clamps are designed to compensate for fluctuations in all types of hoses, resulting from thermal and pressure changes that can cause a hose to expand or contract. The spring allows the clamps to automatically adjust to provide even tension.
Not Yet Reviewed
$18.50
Eddie Marine heavy-duty T-bolt clamps are perfect for the next plumbing project on your boat. These T-bolt-style clamps are made from stainless steel and are available in a range of sizes to fit most any project.
( 1 )
$18.95
—
$24.95
Summit Racing™ T-bolt clamps are available in a dozen adjustable sizes to accommodate small and large hose diameters. These handy clamps are machined from stainless steel and are sold in pairs. Order a supply so you're ready for any project requiring hose attachment.
Not Yet Reviewed
$9.99
Sierra Marine Shields T-bolt exhaust band clamps are manufactured from marine grade 316 stainless steel to resist rust and corrosion. They are available in a large selection of sizes to fit from 1.18 in. to 14.96 in. diameter hoses. These T-bolt clamps are designed to fit Shields Series 200, 250, and are perfect for any application below the water line. The bands are .025 in. thick x .75 in. wide, and each includes an extra-long 1/4 in. bolt and nylon inset locknut, with the bolt, nut, and trunnion made from 304 stainless steel. Hose installation and maintenance is important. Secure your nautical exhaust hoses with the quality of Sierra Marine Shields T-bolt clamps.
Not Yet Reviewed
$7.99
—
$27.99
AP Exhaust T-bolt hose clamps are available for a wide range of air line components. Made from steel with an aluminized finish, these clamps hold connecting parts together securely. Whether you're working with a 3 in. or 8 in. diameter hose, there's a T-bolt ring to tighten for exceptional flow and performance.
Not Yet Reviewed
$8.99
—
$11.99
Plumb it right, and secure those couplings with Pacific Performance Engineering T-bolt clamps. They have the strength and durability to give you a lasting seal on your pressurized system. Don't lose power to leaky fittings; make sure all of those horses you built into that engine get what they need to run. Boost is terrible thing to waste. These PPE T-bolt clamps will help you keep it spooled up and sealed tight.
Not Yet Reviewed
$4.49
Wilwood stainless steel braided Flexline kits are manufactured to high-quality standards and are available in three styles. They have been designed for vehicle-specific applications and are available as an optional item when ordering your disc brake kit. When choosing to add a high-grade stainless steel braided Flexline kit, be sure to get Wilwood's Flexline mounting brackets as well. Wilwood Flexline mounting brackets help to ensure the complete and proper installation.
( 1 )
$21.10
—
$30.49
DX Engineering Saddle Clamps are the best designed and tested clamps you'll find anywhere! And, the selection is extensive! Designed specifically to fit and secure tubing to surfaces in antenna construction, our Saddle Clamps are built strong to prevent slippage. DX Engineering U-bolts and V-bolts are crafted from high-strength 18-8 stainless steel with enough length to attach to thick plates. Saddles are cast from high-strength 535.0 aluminum with a rippled surface for superb gripping plus superior anti-corrosion properties. Saddles are available with natural or powder coated finishes. Need to clamp steel pipe or ground rods? Choose our V-clamps with stainless steel saddles. They have serrated teeth for clamping to a pipe or rod securely. All saddle clamps include stainless steel flat washers, lock washers, and nuts. NOTE: Due to the nature of high-tolerance metals, especially stainless steel, this hardware requires the application of an anti-seize thread lubricant before assembly to prevent galling and seizing. Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information. When you need Saddle Clamps for your application, there's only one smart choice--clamp central at DX Engineering.
( 4 )
$8.49
—
$25.49
Keep your brake lines in place with help from The Right Stuff. These brake hose mounting tabs are manufactured from durable steel in a variety of configurations—for an easy bolt-on or bolt-in fit. No driver wants to see brake cables dangling and susceptible to damage. Organize them safely with The Right Stuff.
( 3 )
$19.99
—
$24.99
Russell Brake Line Mounting Brackets can help secure many factory or aftermarket style brake lines. These steel tabs are offered in two styles, a bolt-on tab style or a weld-on style, either application will keep your lines secured in their proper location.
( 16 )
$5.95
—
$8.95
Allstar Performance offers a wide selection of mild steel chassis tabs and brackets that are available for various diameters of round tubing, square tubing, and flat plates to suit your specific needs. Allstar Performance chassis tabs allow you to easily mount or install accessories on your chassis or suspension, while helping you save you time during car construction or repair.
( 85 )
$9.69
Redhorse Performance offers a variety of brake accessories—including 356 Series brake hose mounting tabs. These bolt-on 90 degree brackets are fabricated from steel and will facilitate an easy installation.
Not Yet Reviewed
$9.15
aFe stainless steel hose clamps are designed to provide secure connections for air intake systems and more. They're constructed of corrosion-resistant stainless steel for incredible durability while maintaining the tight seal that you need. The clamps are available in a T-bolt style that can be tightened with a socket, or a worm gear style that can be tightened with a flat blade screwdriver or a socket. Both types are offered in a broad range of sizes to accommodate your hose diameters.
( 1 )
$8.40
—
$15.75
These Spectre air intake tube collars are ideal for use with 3 in. diameter air intakes. They are designed to attach the tube clamp to the air intake inlet flange housing. Spectre air intake tube collars are manufactured from steel and are then triple chrome plated to a mirror finish.
( 9 )
$8.99
Clearance
OMIX-ADA replacement hose clamps are just the thing for maintenance repairs and restoration projects. These precision-made replacement clamps are available in numerous sizes and styles, such as spring, T-bolt, and worm gear. Made from quality material, these replacement hose clamps provide a great fit and function for vehicle applications dating as far back as the 1940s.
( 1 )
$4.99
$2.99
—
$3.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
