Availability
Showing In Stock Items. Show All 37 Items.
Manufacturing plumbing parts for the performance aftermarket is serious business, at least to the people at Fragola. Long hours and the belief that hose ends are more than "simple devices" have led to the production of what they believe to be the finest pieces available. Fragola's one-piece Series 2000 Pro-Flow hose ends eliminate brazed joints for better flow and incorporate two Viton® O-rings for leak-free service for the life of the fittings. These Pro-Flow hose ends feature a "single nipple" system whereby the socket draws the hose over the nipple and seals it by crushing the hose between the socket and the nipple. Since there is no cut hose to remove, the Series 2000 hose ends are easy to reinstall on a new piece of hose. Fragola Series 2000 Pro-Flow hose ends are crafted from aerospace-quality aluminum that's machined to mil-spec tolerances. They're then "bright dipped" instead of anodized to maintain the original finish and continue to look great over time. Series 2000 Pro-Flow hose ends from Fragola are American-made in several sizes and angles to meet your needs.
( 216 )
$7.99
—
$10.99
Motion Pro brass vacuum adapters will eliminate the need to install adapters before every carburetor synchronization. They can be permanently installed on motorcycles that only have a plug in the vacuum port and rubber caps are included to seal vacuum. Motion Pro brass vacuum adapters are available in two different sizes.
Not Yet Reviewed
$4.39
Motion Pro replacement resistor jets are available for their SyncPro carb synchronize tuner. Ok, so do you remember when trying to synchro your carb's with vacuum gauges and the needles used to shake really bad? With Motion Pro's resistor jets, these little jewels will stabilize the vacuum 'pull', eliminating the shake, surge, and flutter you'd get. Put the resistor jets in the hookup line to the carb's—and voila! You'll get calm vacuum 'pull', allowing you to accurately adjust all the carburetors to each other. You may want to keep a spare set on hand, because your buddies are sure to want a set too!
Not Yet Reviewed
$9.89
Engineered for the professional bike builder, Russell Pro System I compression hose end fittings are chrome plated and designed to ensure a positive seal. These quality hose end fittings are to be used in conjunction with Pro System I braided hose for connections between the master cylinder, junction block, and caliper.
Not Yet Reviewed
$12.99
Russell Pro System II compression hose end fittings complete your motorcycle brake hose connections with the positive seal and professional look you desire. These three-piece adapter fittings are designed for use with Pro System II braided hose. Installation is easy and these compression fittings are available chrome or black plated in seven choices that include 90 degree and banjo style fittings. Make your connections to any master cylinder or caliper with these Russell Pro System II compression end fittings.
( 1 )
$9.99
—
$12.99
Renew your hose ends with Fragola Performance Systems Series 2000 Pro-Flow hose end replacement sockets. After you wrench on your hose ends, they can become scratched and unappealing. Fragola offers replacement sockets manufactured from quality aluminum in several finishes and sizes. Improve the appearance of your Fragola 2000 Series hose ends or replace a lost or damaged socket with Fragola replacement sockets.
Not Yet Reviewed
$3.99
—
$7.99
Clearance
Jiffy-tite Pro-Compact Series plugs are the perfect choice for applications where valved technology is not required. They feature rugged construction from 6061 T-6 aluminum and are lightweight, easily connected and disconnected without tools, offer excellent wear resistance, and feature connectors that swivel 360 degrees after connection. The plugs are black anodized and available in straight, 45-degree, or 90-degree fitting angles in several styles: 37-degree female and male, O-ring boss, and male NPT sizes. They have a maximum operating pressure of 200 psi, a temperature range of -40 degrees to 350 degrees F, and are available for virtually any fuel, water, oil, or transmission application.
Not Yet Reviewed
$11.50
$9.50
These Holley Pro-Jection service parts are available for today's most popular Pro-Jection kits. Whether you have an old analog or new digital system, we have the replacement parts for you. Map sensors, fuel injectors, oxygen sensors, extension cables, a variety of fittings and adapters, and many other parts are available to keep your Pro-Jection system operating efficiently.
( 2 )
$10.99
These Russell Olives allows you to reuse your fittings and lines with Russell's Pro Systems. These Olives are made from soft brass and are designed to assure a positive seal.
( 1 )
$13.99
Russell flare-to-pipe pressure adapters are precision machined from lightweight aluminum, ensuring precise thread engagement and a positive seal at maximum operating pressures. They feature an 1/8 in. female NPT side port for gauge or pressure switch connection and are offered with Russell's ultra-bright Endura finish, or traditional blue or black anodized finish to complement the looks of your installation.
( 6 )
$7.95
On Sale
Original Earl's Auto-Crimp hose ends are still the best in the industry because of their reliability and appearance. They are made out of aluminum and feature a red finish. They come in several AN sizes for just about any job. They're made for use with stainless steel braided hose.
Not Yet Reviewed
$1.99
$1.79
—
$4.15
PowerFlex Endura brake hose ends are made for use with PowerFlex brake line hose. They're manufactured from high-quality alloy steel. This provides the additional strength required to guarantee a quality high-pressure hose assembly.
( 6 )
$14.99
On Sale
To the people at Fragola, engineering is the key, and perfecting their hose ends and fittings is serious business. Fragola Performance Systems AN to pipe thread fittings are manufactured from lightweight quality aluminum or zinc-coated steel to exacting standards for tight, leak-free connections. Many of the aluminum fittings are available in anodized colors to accent your engine compartment. These connectors are available in varying sizes to fit nearly any application. Plumb your racer like a pro with Fragola AN to pipe thread fittings.
( 203 )
$11.99
$2.69
—
$15.99
On Sale
To the people at Fragola, engineering is the key, and perfecting their hose ends and fittings is serious business. Fragola Performance Systems bulkhead fittings are manufactured from lightweight quality aluminum or zinc coated steel to exacting standards for tight, leak-free connections. Many of the aluminum fittings are available in anodized colors to accent your engine compartment and they are American-made. These bulkhead fittings come in varying sizes to fit nearly any application. Plumb your racer like a pro with Fragola bulkhead fittings.
( 38 )
$10.99
$4.49
—
$21.99
On Sale
For bulkheads, tees, unions, reducers, straights, swivels, couplers, and the best AN hose ends and fittings to complete your plumbing job, look no further than Fragola. To the people at Fragola, engineering is the key, and perfecting their hose ends and fittings is serious business. Fragola Performance Systems bulkhead nuts are manufactured from lightweight quality aluminum or zinc coated steel to exacting standards for tight, leak-free connections. Many of the aluminum nuts come in anodized colors to accent or match your fittings and they are American-made. These bulkhead nuts are available in varying sizes to fit your needs. Plumb your racer like a pro with Fragola bulkhead nuts.
( 16 )
$7.99
$1.79
—
$10.99
Confidently eliminate unwanted air pockets in your brake system just like the pros with these brake bleeder screw packs from Allstar Performance. They ensure simple and effective air evacuation from your brake system and are manufactured from high-grade steel for lasting durability. These brake bleeder screw packs allow one caliper to be mounted in any front, rear, left, or right position. So, if you are planning a brake job, give these brake bleeder screw packs from Allstar Performance a try!
( 1 )
$10.99
On Sale
Whether you need bulkheads, tees, unions, reducers, swivels, couplers, or elbows to complete your plumbing job, look no further than Fragola for the finest fittings and adapters available. To the people at Fragola, engineering is the key, and perfecting their hose ends and fittings is serious business. Fragola Performance Systems AN to metric adapter fittings are manufactured from lightweight, quality aluminum to exacting standards for tight, leak-free connections—and then anodized for durability. These fittings are available in varying sizes to fit nearly any application. Plumb your racer like a pro with Fragola AN to metric adapter fittings.
( 66 )
$11.99
$3.59
—
$10.99
O-rings, washers, and clamps--oh my! Okay, that's not as scary as "lions, tigers, and bears," but forgetting any of these "small" items may have you singing "If I only had a brain." The people at Fragola Performance Systems take pride in these "small" but very important pieces to pull your plumb job together like a pro, offering several styles of washers, clamps, and O-rings. Fragola crafts these AN thread O-rings from heat and chemical-resistant Viton® in several sizes to provide the seal that you need for your application. You'll be able to finish your job like a wiz with help from Fragola Performance Systems O-rings.
Not Yet Reviewed
$5.99
—
$11.99
AFCO Racing brake system fittings are designed with the custom fabricator in mind. Made from quality materials, these fittings are available in a variety of sizes and applications to suit your brake system needs. Leave it to the pros at AFCO for the quality parts you need to complete your brake system.
( 5 )
$5.99
—
$9.99
O-rings, washers, and clamps--oh my! Okay, that's not as scary as "lions, tigers, and bears," but forgetting any of these "small" items may have you singing "If I only had a brain." The people at Fragola Performance Systems take pride in these "small" but very important pieces to pull your plumb job together like a pro, offering several styles of washers, clamps, and O-rings. Fragola designed these precision-stamped aluminum AN crush washers to work with their fittings for a secure, leak-free seal--an absolute must for aluminum straight thread and banjo fittings. Also, Fragola makes replacement aluminum crush washers for their fittings used with fuel system or carburetor adapters and nylon sealing washers that are almost unaffected by many fuels, oils, and chemicals. You'll be able to finish your job like a wiz with help from Fragola Performance Systems.
( 4 )
$9.99
On Sale
Whether you need bulkheads, tees, unions, reducers, swivels, couplers, or elbows to complete your plumbing job, look no further than Fragola for the finest fittings and adapters available. To the people at Fragola, engineering is the key, and perfecting their hose ends and fittings is serious business. Fragola Performance Systems tee adapter fittings are manufactured from anodized aluminum or zinc finished steel to exacting standards for tight, leak-free connections. These tee adapter fittings are available in varying sizes to fit nearly any application, and most are produced right here in the USA. Plumb your racer like a pro with Fragola tee adapter fittings.
( 34 )
$10.99
$6.29
—
$11.99
O-rings, washers, and clamps--oh my! Okay, that's not as scary as "lions, tigers, and bears" but forgetting any of these "small" items may have you singing "If I only had a brain." The people at Fragola Performance Systems take pride in these "small" but very important pieces to pull your plumb job together like a pro, offering several styles of washers, clamps, and O-rings. Fragola designed these precision-stamped aluminum AN crush washers to work with their fittings for a secure, leak-free seal--an absolute must for aluminum straight thread and banjo fittings. Also, Fragola makes replacement aluminum crush washers for their fittings used with fuel system or carburetor adapters and nylon sealing washers that are almost unaffected by many fuels, oils, and chemicals. You'll be able to finish your job like a wiz with help from Fragola Performance Systems.
( 1 )
$1.99
—
$2.99
O-rings, washers, and clamps--oh my! Okay, that's not as scary as "lions, tigers, and bears," but forgetting any of these "small" items may have you singing "If I only had a brain." The people at Fragola Performance Systems take pride in these "small" but very important pieces to pull your plumb job together like a pro, offering you several styles of washers, clamps, and O-rings. Fragola designed these precision-stamped aluminum AN crush washers to work with their fittings for a secure, leak-free seal--an absolute must for aluminum straight thread and banjo fittings. Also, Fragola makes replacement aluminum crush washers for their fittings used with fuel system or carburetor adapters and nylon sealing washers that are almost unaffected by many fuels, oils, and chemicals. You'll be able to finish your job like a wiz with help from Fragola Performance Systems.
( 17 )
$5.99
—
$11.99
Fragola Race-Rite crimp-on hose end replacement collars are for use with Race-Rite and Race-Rite Pro hose to allow you to plumb with precision. The collars thread onto the hose end body to assure a perfect concentric crimp connection every time. These aluminum hose end components have a hard coat black finish and come in a variety of AN sizes. Order the Fragola Race-Rite crimp-on hose end replacement collars needed for your application.
Not Yet Reviewed
$5.99
—
$10.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
