Availability
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
—
$849.95
$673.95
—
$763.95
On Sale
Make fuel checks simple with Aeromotive's billet fuel sample valves. Depending on the model you select, the aluminum units can install into your 1/8 in. NPT inlet port with threads or quick-connect attachment. Some contain a stainless steel barb fitting for extension hoses and rotate 360 degrees for easy sampling. A spring-loaded safety feature keeps the sample valve sealed when unlocked, and rotates into a locked position when it's time for racing. When a fuel sample is required, simply rotate the valve to the unlocked position, press down for a fuel sample, re-lock, and go race!
( 7 )
$134.20
—
$223.30
$120.78
—
$200.97
On Sale
Holley manifold plug and fitting kits allow two different styles of connections within one unit. They are offered to service your mid-mount accessory drive LT/LS, BBC, and SBC cooling manifolds. These genuine Holley fittings are constructed from aluminum and feature a chrome finish for longevity.
( 2 )
$43.69
$39.32
On Sale
Racing Automotive Group offers brake shut-off valves that are designed to be installed in-line in a hydraulic brake line system to enable locking of the front or rear brakes for performing burnout maneuvers, or grid starts. The valves also feature an easy to use handle at the top for quick shut-off. These units are manufactured of lightweight billet aluminum, and each component is precision-machined to exact tolerances to offer trouble-free performance.
( 1 )
$54.99
$49.49
On Sale
Don't get stuck in the cold due to a malfunctioning heater! Maradyne heater plumbing kits are just what you need to get the warm air flowing efficiently into your vehicle. These kits include high-quality materials that will help you repair, maintain, or improve the plumbing on your heating unit. Maradyne heater plumbing kits provide you with the important accessories you need to get ready for those frigid months ahead!
( 5 )
$47.56
—
$79.47
$42.80
—
$71.52
On Sale
Nitrous Outlet fuel rail distribution blocks are machined from billet aluminum and are specifically designed to neatly tie into your fuel system. In addition to supplying fuel to your wet system's fuel solenoid, the units also feature 1/8 in. NPT accessory ports for the installation of a pressure gauge or pressure safety switch. They easily connect to the OEM Schrader valve and are black anodized for lasting good looks.
Not Yet Reviewed
$29.99
—
$31.99
$25.49
—
$27.19
On Sale
Aeromotive Stealth Eliminator Street Fuel systems are complete kits for EFI engines producing up to 1,400 flywheel hp forced induction or 1,900 flywheel hp naturally aspirated on gas. The systems provide fuel rails and Aeromotive's fuel pump speed controller for continuous duty street/strip applications. These serious Aeromotive kits also include all the necessary hard parts and feature their Stealth Eliminator fuel pump designed to fit inside the stock OEM tank and integrate with the stock fuel-level sending unit (and jet-siphon transfer pump). The systems are available for several different applications. Systems include: * Billet high-flow fuel rails * Billet EFI fuel pressure regulator * Stealth in-tank fuel pump assembly * Fuel pump speed controller—designed to keep fuel cool in cars that will see extended street driving but still need full pump performance for all out racing * Billet filter bracket * High-flow, 40-micron filter assembly * One-way check valve * High-flow ORB port fittings * One-piece CNC Y-block * Fuel-resistant nitrile O-rings
Not Yet Reviewed
$3,344.25
$3,009.82
On Sale
APR braided stainless steel brake line upgrades are a direct-fit replacement that improves your braking experience with the best lines on the market today. Forget the factory rubber hoses that expand and can even rupture over time. These braided 304 stainless steel lines with a smooth-bore PTFE core allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel, as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, APR brake lines are application-specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive PVC outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft at 1,000 psi and 0.11 cc/ft at 2,900 psi. They're compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. Order the lines recommended for the front and/or rear of your vehicle.
Not Yet Reviewed
$139.95
—
$209.95
$76.95
—
$188.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
